That filter makes the blades look amazing and even film accurate. Not 100% as they appear in real life maybe, but much closer to that than without the filter. Great review!
Awesome video as always sir James and your attention to detail is great the camera filter does have a different effect makes the lightsaber blade more realistic and I like how informative your videos are, also happy early birthday James🐉
That small extension piece is exactly what you described it to be: a blade extension that can be screwed into the emitter to further secure your blade for heavier swing and dueling.
Marrok’s hilt can be bought through Korbanth or, if you want a more accurate hilt that’s a bit more expensive, I’d go with KR Saber’s version of Marrok’s hilt. I believe both Korbanth and KR Sabers sell DIY install kits with a chassis and all the parts you need to install it with. If you’re thinking about getting a Marrok hilt and having it installed, there are a few installers I can recommend besides myself.
If it's not already in your config, there is a way to mitigate the issue with the slanted proffie board. You'd want to add a define for orientation_rotation similar to the last line below, may be a different number for your hilt, other than the -20 could be a positive number as well, depending on the way it's installed. #define ORIENTATION ORIENTATION_FETS_TOWARDS_BLADE #define ORIENTATION ORIENTATION_USB_TOWARDS_BLADE #define ORIENTATION ORIENTATION_TOP_TOWARDS_BLADE #define ORIENTATION ORIENTATION_BOTTOM_TOWARDS_BLADE #define ORIENTATION ORIENTATION_SDA_TOWARDS_BLADE #define ORIENTATION ORIENTATION_SERIAL_TOWARDS_BLADE The following changes the angle required to register twists on curved hilts. Example is for Assaj Ventress curved hilt install. #define ORIENTATION_ROTATION 0,-20,0
Filter looks great bro. The only issue has really nothing to do with the filter at all and that's the was the "chip" is set up. Because of it being at an angle, the people at home miss out on the differant types of ignitions
I've every Ahsoka hilt UW/TPS has sold. If you're talking about the ASKM (with removable- swappable chassis), then I'd note that they're wide hilts, because the chassis requires it, with the slightly curve to them.
The density filter (?) I think you're using helps show the color effects better, but the red still has a yellow core to it. I've both Ezra's and Sabine's from UW, plus the VS version and much prefer UW, because of being able to swap chassis. It lowers my cost and allows me to keep buying more from them. Yes, the added piece is an emitter extension to help keep the blade more rigid, but doesn't have to be used, but is recommended to use it if it's not on display. I'm hoping UW releases more lightsabers from the show, plus I'm hopefully optimistic they'll do re-releases of hilts I missed. They did release Maul's from TPM, which is why I'm hoping for more releases.
That filter makes the blades look amazing and even film accurate. Not 100% as they appear in real life maybe, but much closer to that than without the filter. Great review!
Awesome video as always sir James and your attention to detail is great the camera filter does have a different effect makes the lightsaber blade more realistic and I like how informative your videos are, also happy early birthday James🐉
New filter looks amazing!!! Especially with the lights ON believe it or not. Great job!
That small extension piece is exactly what you described it to be: a blade extension that can be screwed into the emitter to further secure your blade for heavier swing and dueling.
One thing to note, It also features a Crystal Chamber 🙂
Filter looks good
Yep that filter makes it look really nice 🔥
Marrok’s hilt can be bought through Korbanth or, if you want a more accurate hilt that’s a bit more expensive, I’d go with KR Saber’s version of Marrok’s hilt. I believe both Korbanth and KR Sabers sell DIY install kits with a chassis and all the parts you need to install it with. If you’re thinking about getting a Marrok hilt and having it installed, there are a few installers I can recommend besides myself.
Looks great! 🙂
The new filter seems to work great. 👍
If it's not already in your config, there is a way to mitigate the issue with the slanted proffie board.
You'd want to add a define for orientation_rotation similar to the last line below, may be a different number for your hilt, other than the -20 could be a positive number as well, depending on the way it's installed.
#define ORIENTATION ORIENTATION_FETS_TOWARDS_BLADE
#define ORIENTATION ORIENTATION_USB_TOWARDS_BLADE
#define ORIENTATION ORIENTATION_TOP_TOWARDS_BLADE
#define ORIENTATION ORIENTATION_BOTTOM_TOWARDS_BLADE
#define ORIENTATION ORIENTATION_SDA_TOWARDS_BLADE
#define ORIENTATION ORIENTATION_SERIAL_TOWARDS_BLADE
The following changes the angle required to register twists on curved hilts.
Example is for Assaj Ventress curved hilt install.
#define ORIENTATION_ROTATION 0,-20,0
I like that saber!
Korbanth has a version of Marrok's saber. Also KR Sabers has one as well as an empty hilt.
Filter looks great bro. The only issue has really nothing to do with the filter at all and that's the was the "chip" is set up. Because of it being at an angle, the people at home miss out on the differant types of ignitions
Can you review Darth Vaders episode 6 lightsaber? Id love to have a replica of that
Filter makes a difference. Looks better.
Great review - are you going to review their new Ahsoka sabers?
I've every Ahsoka hilt UW/TPS has sold. If you're talking about the ASKM (with removable- swappable chassis), then I'd note that they're wide hilts, because the chassis requires it, with the slightly curve to them.
The density filter (?) I think you're using helps show the color effects better, but the red still has a yellow core to it.
I've both Ezra's and Sabine's from UW, plus the VS version and much prefer UW, because of being able to swap chassis. It lowers my cost and allows me to keep buying more from them.
Yes, the added piece is an emitter extension to help keep the blade more rigid, but doesn't have to be used, but is recommended to use it if it's not on display.
I'm hoping UW releases more lightsabers from the show, plus I'm hopefully optimistic they'll do re-releases of hilts I missed. They did release Maul's from TPM, which is why I'm hoping for more releases.
Dream FX Filter :)
I've been wondering is there a difference between this saber & the EBJ from The Pach Store?
This is proffie
sabers looked WAAAAY better