DS1302 RTC with arduino tutorial
HTML-код
- Опубликовано: 14 окт 2024
- In this video, we learn how to use DS1302 RTC (Real Time Clock) with Arduino the simple way.
You can support us and unlock premium projects code by joining our membership by clicking the link below:
/ @miliohm
You can download library and sketch here :
miliohm.com/ds...
Music :
"LAKEY INSPIRED - Chill Day" is licensed under a Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0)
Music provided by BreakingCopyright: • [Non Copyrighted Music...
Thank you sooooo much. I have tried many DS1302 libraries with little to no success. Yours not only works well but is also considerably smaller and very easy to understand.
WOW, after 2 days of pulling out my ever dwindling hair over getting this module set up to work, I find your library and sketch. Then after reading how to set the time, I have a WORKING MODULE!! You have come to my rescue, and are, at least for today, My hero!! Thanks for sorting this out for me! Now on with the build!
After trying out all libraries from Arduino IDE library manager, only virtuabotixRTC you introduced in your video works. Thanks. One point to share with others reading this post. I can only read the time accurately when I also connect the GND pin to my Arduino board. Vçc pin is not necessary.😅
2023, time goes fast, increases by 6 seconds for 1 second IRL
wow thanks alot ....after so much time been looking for the solution
Hi, great video and easy to follow, but when the arduino is unplugged and then plugged back in the rtc starts counting from the values set with myRTC.setDS1302Time() can't you use something like "now" so that the time does not reset or take the time which is on the rtc
You should pay attention to the video. It should commented once it uploaded.
@@miliohm yes I saw it the second time around - comment out the set date ok thanks
I just have the DS1302 alone (Not in a module) how can i connect it to my arduino UNO? And the link for downloading the library is not wotking
I want to integrate the ds1302 module with the max7219 dot matrix module and see the words and numbers written in the serialmonitor section over the dot matrix. what should i do? can you help me?
Thanks for tutorial. I have a question about issue with not remember time after some day. Battery is alright = 3,1 V. It's working okay, but after some day it is reset and go back to Current Date / Time: 00/00/2000 00:00:00 and then starting count again, but not time what it was set up during upload. Thanks for advice!.
did you fix it if yes how
Me too
hello, may I know when the start of the day starts? is it saturday? so if my day right now is friday, I'm gonna put 7?
Do this code work's in esp bords?
im trying to get the olsed to work but all tutorials wont have rtc or wont have oled display im stuck
can this code support auto adjust for DST - day light saving?
Hi friend, you know. I have a problem with DS1302 module. Time is set at 01/ENE/2000 00:00 (suddenly) I mean, it works well for many days, if energy turn off, time is ok when energy turn on againg. You may think that the battery is not working right (less voltage than 3 V), however, battery is ok. The problem happends in every module I have. Have you heard about this problem with DS1302 module? . Thanks
Did you already erase the line where the code set the time at setup?
@@miliohm yes friend, i mean, im not using your example, because i know how to use the ds1302.
My proyect works, the problem is that after das the ds1302 set 1 ene 2000
@@wayne5x im not sure why, never faced the same problem.
@@miliohm ok bro, thanks.
Sorry but the library didn't work! I went in the library manager,
searched for RTC by Makuna and opened File>Examples>Rtc by Makuna
compiled and it ran just great. I am surprised that not much people are having problem to compile it correctly...
I connected it on an Arduino Nano.
how to connect to the metrix display and whats the code for that
my guy!!! Solid video
Thanks!
its good but i have a question u are working with an ardoino mega does it work with a ardoino uno ?
No, it's arduino Uno. But this will works on mega and nano too
I am using a Leonardo right now and it works fine.
how to use RAM memory of this chip?
hats off to you mate, it worked.
Thanks
can you use time lib, to setup 1302?
Can I store counter data to external rtc module?
if the battery runs out? what happen need to re-upload the coding everytime ????
one more question, if its battery is dead. i need to update the time. how to do the user input ??
🆒 Thank you so much for uploading this video.
👍👍👍👍👍
Sharing with community 🇵🇰
How to use this with a sketch?
To make a project work in real time by using this ?
Hello, how are you? What happens is that the exercise does not help me since it stays at the time I assign it, would you help me?
Did you comment the time settings after first upload? You need to do that.
Hi, I have a problem with the serial monitor because the time is not updated and it always appears, could you help me, I would appreciate it very much
Maybe you don't comment the set time. You should upload the code for second time but with set time commented. So it will not set time every starting up. You could watch more carefully
YOU ARE THE BEST THANK YOU IT WORKS
thanks!
We can use this deta aurdino uno
Wow, you've really helped me here thanks!
Thanks, just don't forget to subscribe!
@@miliohm
my ide reject the library for ds 1302 what should i do
@@munyitananamasonda5976 what it said?
thanks for the video, could you connect it to a stepper motor on the next vedeo?
RTC with stepper? What for?
@@miliohm lmao
how do I download the file from github?
wowo thanks a lot, know i understand about rtc
Library ds3231 bsa buat ds1307 tdk?
belum pernah coba, lebih baik pakai library yang sesuai saja.
amazing really help alot subcribing
i am having a problem, my time and Date is wrong 00:00:00 and 0/0/2000
did you already set the time at setup?
nggawe jam kikuk pie bang?
nyuwun ilmune
Jam kikuk nganggo Arduino?
@@miliohm yes... help me?
Takipteyiz....ws2812b led ve bu videodaki parçaların aynısıyla bir saat yaparsanız süper olur emeğe ve bilgiye saygılar...kolay gelsin...
o-o
Thank you !
Mpun kulo jempolin nggih,
Nggih maturnuwun mas
@@miliohm In the next project, I request the DS3231 clock setting with the smartphone on the LCD OLED
@@miliohm jenengan wong jawa?
@@aetechcorp9961 nggih mas
Я фанат
Serial monitornya ga bisa dipakai di arduinodroid
Tolong bantuannya
@@sanji6176 mohon maaf ga familiar sama arduinodroid
@@miliohm arduino ide versi android mas
@@sanji6176 iya mas, maksudnya saya belum pernah pakai jadi ga tau
@@miliohm iya mas gapapa
You never even showed it worked? Why
you didn't watch the video?
how to make it 24hours
It's already 24 hours format
how to make led strip only on for certain time and off for certain time
@@adamiskandar7845 ya tinggal dibuat if kondisi aja mas, misal if waktu== 10 then nyala, else mati. Misal gitu
@@miliohm ouh org indo
@@miliohm mana lagi bagus, ds3231 ke ds1302 ke ds1307
Huh?
kuy
Sip
I just uploaded this sketch from the page copied and pasted it and it's getting highlighted for
#include