How to Switch your Talaria Push to Start for a Key!

Поделиться
HTML-код
  • Опубликовано: 25 янв 2025

Комментарии • 92

  • @naren.pen8
    @naren.pen8 11 месяцев назад +4

    thanks for the video i didn’t see anyone else doing this and i really wanted to thanks for the tutorial

    • @ChargedTalaria
      @ChargedTalaria  11 месяцев назад +1

      Ya I was in the same boat haha! I hope this helps you out

  • @duncanhoward1179
    @duncanhoward1179 8 месяцев назад +9

    Nice to see someone your age actually doing stuff right lol. The California surron kids could learn from you.

    • @ChargedTalaria
      @ChargedTalaria  8 месяцев назад

      Haha I agree, some of their mods are questionable

    • @RobbieLogan707
      @RobbieLogan707 6 месяцев назад

      California talaria kids better

    • @ChargedTalaria
      @ChargedTalaria  6 месяцев назад

      @@RobbieLogan707 your crazy haha

  • @Zx7o.
    @Zx7o. 8 месяцев назад +5

    Been doing a lot of research before I buy my XXX, This was extremely useful thank you for putting the effort in to make a video homie 🤙

  • @TomacProd
    @TomacProd 4 месяца назад +1

    Thanks for the video bro ur like the only guy that made a video on how to do this

  • @HQM_ENT
    @HQM_ENT 10 месяцев назад +2

    Only vid i found thank you

  • @JosePerez-hv1fr
    @JosePerez-hv1fr 3 месяца назад +1

    Hey so you know how the new key ignition has a plastic white pin connecter? Did you chop that off and then connect them to the wires on the bike?

  • @JeffXstrom47
    @JeffXstrom47 8 месяцев назад +2

    This was one of the best how to videos. Very niiice

  • @elmavukovic8012
    @elmavukovic8012 9 дней назад

    how did you rise the ignition plastic because i did mine and it has a bad rise!!!

    • @ChargedTalaria
      @ChargedTalaria  9 дней назад

      @@elmavukovic8012 I used some metal brackets that screw into the frame and give me a hole to screw the plate into at the top. It’s pretty simple. I can send pictures if you dm me on instagram @chargedtalaria

  • @JosePerez-hv1fr
    @JosePerez-hv1fr 3 месяца назад

    Last thing. the way you did this wiring did you need to extend the black and red wires?

    • @ChargedTalaria
      @ChargedTalaria  3 месяца назад

      @@JosePerez-hv1fr on the ignition, or the rfid

    • @JosePerez-hv1fr
      @JosePerez-hv1fr 3 месяца назад

      @@ChargedTalaria like did you have to extend the wires for the new key ignition? Or no

    • @ChargedTalaria
      @ChargedTalaria  3 месяца назад +1

      @@JosePerez-hv1fr no

  • @lazerfinatics9652
    @lazerfinatics9652 6 месяцев назад

    What thing did you use to make the cover rise so you could fit the switch? Please let me know Thankss

    • @ChargedTalaria
      @ChargedTalaria  6 месяцев назад

      So i used two pieces of sheet metal, cut them to the right distance, drilled two fitting holes, then i used a set of nut and bolt to fit the plastic cover to the brackets, then the stock bolts to fit the brackets to the frame, its kinda complicated but it works well

  • @ryanrabe9984
    @ryanrabe9984 10 месяцев назад +2

    has anyone found a shorter ignition? of so whats it called

    • @ChargedTalaria
      @ChargedTalaria  10 месяцев назад +2

      Not from what I’ve seen, but I’ll keep looking

  • @AustinRosales-q2n
    @AustinRosales-q2n 2 месяца назад

    Can you please link the exact key ignition that you used.

    • @ChargedTalaria
      @ChargedTalaria  2 месяца назад

      @@AustinRosales-q2n Ignition Key Switch Lock 2 Wire -... www.amazon.com/dp/B0118LT2U8?ref=ppx_pop_mob_ap_share

  • @Siah-j1p
    @Siah-j1p 2 месяца назад

    How did you take the start button out

    • @ChargedTalaria
      @ChargedTalaria  2 месяца назад

      @@Siah-j1p it’s just a bolt on the bottom

  • @Brecken.S
    @Brecken.S 3 месяца назад

    Yo is there a link or something where did you get this?

  • @BkeRentals
    @BkeRentals Месяц назад

    Hey man I have a problem where the black red and black white wires if they get moved at all won’t let the bike turn on, I don’t have them wire crimped but it just twisted them so idk if that’s what it is but I wanted to see if you knew what might be happening

    • @ChargedTalaria
      @ChargedTalaria  Месяц назад

      @@BkeRentals try the black red and red. I’m not sure why that is happening but I switched to black red and plain red and it works fine. Try crimps or twist and electrical tape

    • @BkeRentals
      @BkeRentals Месяц назад

      @@ChargedTalariaif I just leave the white and red one would anything happen or would it Js be fine if I left it

    • @ChargedTalaria
      @ChargedTalaria  Месяц назад

      @ it’ll be fine, did you get it to work consistently?

    • @BkeRentals
      @BkeRentals Месяц назад

      @ sometimes it would turn on and then it would just stop working I’d have to unplug and plug in the battery every time

    • @ChargedTalaria
      @ChargedTalaria  Месяц назад

      @ weird. If I were you id try the red and black red

  • @yugpatel7017
    @yugpatel7017 5 месяцев назад

    Can you make another video on how you did this 3:02

  • @coca-colaaddicted3156
    @coca-colaaddicted3156 7 месяцев назад

    amazing video, only one thing though, does your bike turn on while charging I bypassed the key fob because I lost all the fobs, and I connected the red/black wire and red/white wire together and the bike automatically turns on while charging. I am gonna change it out to a key ignition and was wondering if your bike does this?

    • @ChargedTalaria
      @ChargedTalaria  7 месяцев назад

      yes it does. its really weird but i dont think it is bad

    • @coca-colaaddicted3156
      @coca-colaaddicted3156 7 месяцев назад

      yea ik I wonder if it can be stopped, thanks for letting me know

    • @ChargedTalaria
      @ChargedTalaria  7 месяцев назад

      @@coca-colaaddicted3156 im thinking maybe instead of changing wires at the rfid box maybe if you bypass the scanner part by just twisting the two wires together to skip it, maybe it wouldnt turn on when charging.

  • @JosePerez-hv1fr
    @JosePerez-hv1fr 3 месяца назад

    Is it supposed to turn on while charging after doing this?

    • @ChargedTalaria
      @ChargedTalaria  3 месяца назад

      @@JosePerez-hv1fr so depending on how you did it, yes and no. It is apart of the red white wire to red black, if you don’t want that, connect red solid, to red black. But if you do it that way, every time you turn on the bike you get an error code, it goes away after pressing start, but it is a little inconvenient. I didn’t mention it in the video as I recently discovered this. So it’s up to you

    • @JosePerez-hv1fr
      @JosePerez-hv1fr 3 месяца назад

      @@ChargedTalaria Im just wondering if you know if that’s bad for the bike since I charge it overnight

    • @ChargedTalaria
      @ChargedTalaria  3 месяца назад +1

      @@JosePerez-hv1fr no it will be alright, because it stops charging and turns off at 100%

  • @alexw327
    @alexw327 8 месяцев назад

    dude i scoured the internet to find a video on this and bro you killed it. one thing tho. where did you find those adapters to hold down your plate?

    • @ChargedTalaria
      @ChargedTalaria  8 месяцев назад

      It’s a bracket for a screw to hold another screw, you could also cut a piece out of a sheet of metal or something. So it’s just a custom piece

  • @yaminhelal6445
    @yaminhelal6445 6 месяцев назад

    How did you make the plate that holds the key more even

    • @ChargedTalaria
      @ChargedTalaria  6 месяцев назад

      @@yaminhelal6445 I added some sheet metal to raise it, then bought a longer screw for the top

    • @yaminhelal6445
      @yaminhelal6445 6 месяцев назад

      @@ChargedTalaria how did you raise it with sheet metal

    • @ChargedTalaria
      @ChargedTalaria  6 месяцев назад

      @@yaminhelal6445 I cut two little holes, put one screw through one hole into the frame, then another screw into the plate, then repeat on other side

    • @yaminhelal6445
      @yaminhelal6445 6 месяцев назад

      @@ChargedTalaria I know this is asking a lot but do you think you can post a video or tutorial showing how to do it

    • @ChargedTalaria
      @ChargedTalaria  6 месяцев назад

      @@yaminhelal6445 dm me on insta I’ll send a pic tomorrow

  • @ryanclark7913
    @ryanclark7913 5 месяцев назад

    U got a link for them

  • @wspdaniel132
    @wspdaniel132 3 месяца назад

    Yo how did u do the mod to make it not stick up that’s what i’m tryna do

    • @ChargedTalaria
      @ChargedTalaria  3 месяца назад

      @@wspdaniel132 just a rectangle of sheet metal with two holes in it, just to raise the plate a bit

    • @wspdaniel132
      @wspdaniel132 3 месяца назад

      @@ChargedTalaria Where did u get it? Can u send a link

    • @ChargedTalaria
      @ChargedTalaria  3 месяца назад

      @@wspdaniel132 it’s custom

    • @wspdaniel132
      @wspdaniel132 3 месяца назад

      @@ChargedTalaria How did u make it

    • @ChargedTalaria
      @ChargedTalaria  3 месяца назад

      @@wspdaniel132 tin snips, sheet metal, and a drill

  • @chickeneater-ip1rn
    @chickeneater-ip1rn 7 месяцев назад

    Can you do this with a surron or talaria key, and when i plug my bike in it turns on can i fix that?

    • @ChargedTalaria
      @ChargedTalaria  6 месяцев назад

      sorry for not seeing this sooner, ive come down to the conclusion that the bike turns on when charging due to the rfid being bypassed, it makes no sense but thats the reason it does it, you could possibly find another way to bypass it, then it wouldnt turn on, but in the meantime i done know how to fix it, and you can do it with a surron or talaria key, but i dont recomend the surron key, because the surron has universal keys, im pretty sure, making it less secure

    • @markospina575
      @markospina575 5 месяцев назад

      @@ChargedTalariawhat if you created a simple switch instead of connecting the wires . So you can turn of the chip iefd connection when charging or not around

    • @ChargedTalaria
      @ChargedTalaria  5 месяцев назад

      @@markospina575 if you are doing that, lmk how it goes, that’s an interesting idea

    • @chickeneater-ip1rn
      @chickeneater-ip1rn 5 месяцев назад

      @@ChargedTalariawhen the bike turns on while charging, does it stay on or can you turn it off?

  • @markospina575
    @markospina575 5 месяцев назад

    For me I tried leaving the button in . And bypass chip it only works once .
    But once you turn it off it stays dead untill you disconnect and reconnect the two wires .
    Not sure if this is cause I didn’t use a key switch

    • @ChargedTalaria
      @ChargedTalaria  5 месяцев назад

      thats odd, you may have cut and connected the incorrect wires. If you want you could give the key switch a shot

    • @markospina575
      @markospina575 5 месяцев назад

      @@ChargedTalaria I got the key switch it works . But if it turned it on and off abunch it would stop turning on untill i disconnect and reconnect wires .
      I got the key and left nfc disconnect .
      The light also flashes at times weird when turning on
      I did that switch install on the nfic module for the chip looks very clean easy to do it’s like a double security measure as well you gotta flip it to Turn on bike and I turn it off when leave it and charging turn off it doesn’t make all the lights turn on

    • @markospina575
      @markospina575 5 месяцев назад

      @@ChargedTalaria wish I could show you photos Amazon came in clutch with the switches and key ignition

    • @ChargedTalaria
      @ChargedTalaria  5 месяцев назад

      @@markospina575 if you want you can dm me on insta

  • @dylanmonkey7518
    @dylanmonkey7518 7 месяцев назад

    what is mod piece called so it doesn’t stick up

    • @ChargedTalaria
      @ChargedTalaria  6 месяцев назад

      its just some sheet metal i cut up

  • @mzonfire
    @mzonfire 8 месяцев назад

    Dumb question but is it possible to have both?😅

    • @ChargedTalaria
      @ChargedTalaria  6 месяцев назад

      yes, you can just replace the button with the ignition and keep the rfid active

  • @KrazzykillaB
    @KrazzykillaB 10 месяцев назад +1

    Good video. Nice info.. How about adding a USB port? That would make a good vid.

    • @ChargedTalaria
      @ChargedTalaria  10 месяцев назад +1

      That would be a good idea, I’ll have to do some research and see if that’s possible

    • @brady3948
      @brady3948 10 месяцев назад

      i did it all u so is tap into the daytime running light on the headlight which is the brown / black wire and then tap into the ground which is green

    • @fake_og6361
      @fake_og6361 7 месяцев назад

      @@brady3948can i still have a headlight though?

    • @poplix2704
      @poplix2704 5 месяцев назад

      @@fake_og6361 yes

  • @EBIKEScott
    @EBIKEScott 9 месяцев назад

    so much easier to steal now! ty

    • @ChargedTalaria
      @ChargedTalaria  9 месяцев назад

      It’s not, surrons are easier to steal because they have a universal key, this has a unique key

    • @EBIKEScott
      @EBIKEScott 9 месяцев назад

      @@ChargedTalaria who needs a key simply rip off the plastic piece and twist two wires together

    • @ChargedTalaria
      @ChargedTalaria  9 месяцев назад +1

      @@EBIKEScott could say the same for the rfid

    • @ChargedTalaria
      @ChargedTalaria  9 месяцев назад +1

      @@EBIKEScott and at least my bike has some sort of security compared to yours

    • @EBIKEScott
      @EBIKEScott 9 месяцев назад

      @@ChargedTalaria most of my bikes have a simple key also its the same thing, im just stating the obvious you made the bike easier to steal. The rfid is more secure and hidden in a much better spot within the wiring harness.

  • @chickeneater-ip1rn
    @chickeneater-ip1rn 7 месяцев назад

    Can you do this with a surron or talaria key, and when i plug my bike in it turns on can i fix that?

    • @ChargedTalaria
      @ChargedTalaria  7 месяцев назад

      I haven’t found a way to, but it will work with any key I assume