4WD DIY Smart Car Chassis Kit || Assembling & Installation
HTML-код
- Опубликовано: 2 окт 2024
- 4WD DIY Smart Car Chassis Kit || Assembling & Installation
WATCH, TRY & LEARN
please like, subscribe and share for more videos of experiments to come.
Thank you for watching...
![FendiDa Rappa - Clock Dat ft. Shamar Marco [Official Music Video]](http://i.ytimg.com/vi/3NBU8KHdxYY/mqdefault.jpg)
![KAYTRANADA - Witchy (feat. Childish Gambino) [Official Video]](http://i.ytimg.com/vi/jGK3YVmGZ3Y/mqdefault.jpg)
At 2:53 you said to solder the wires with the motor right. Can't we just connect them without soldering ??
If you connect the wires without soldering it can loose for some time, that can cause the motor not to properly work, that's why it is advisable to solder it.
@@JRECT Thank You Very Much For your reply
Como puedo obtener el proyecto para yo montarlo gracias
Hi, check this link for the project that you can mount on it ruclips.net/video/L1Yvs3njrAc/видео.html
Bro does the gear motor have a plus or minus please tell me so I don't make mistake
hi, for the motor there's no indicator for the polarity, based on my experience in terms of soldering the wires to the motors, if you solder red wire in the right side and black wire in the left you must do the same thing for the other motors, so it will be the same rotation when you placed the motors and test it. kindly check my other video ruclips.net/video/L1Yvs3njrAc/видео.html how to connect with L298n motor driver
@@JRECT thanks bro
@@JRECT thanks for the motors and bro I have made a radar project it consists of The servo,Arduino Uno, breadboard,some jumper wires MM and MF jumper wires and sonar sensor so I did all of it and the servo was spinning with the sonar sensor but it wasn't detecting the object Which came Infront of it I also installed the Processing 3 software but the readings were stuck on 1 place please help me
wow cool naman nyan..
Salamat po
Hola como puedo obtener el proyecto para yo montarlo gracias
Could you also please put the link for this kit along with its price ??
hi, if you are located in UAE, check out store.techmaze.ae
Bro, can we use an Arduino & a 9V Battery connected through an adapter directly, to run this car ??
Yes you can connect 9v, but just make sure that the 9v battery you will use is good and take note of the capacity, it can drain the battery quickly.
@@JRECT Thank You Very Much !!!