Hi, a question. Do you fold the modules all yourself, or does someone help you? I am really tedious work ..... Thanks for the videos, have made great egg .... for 3 days
My daughter made these exact ones over a year ago for her brothers wedding from your original video. She added red for her and black for him. They have them sitting up high in a shelf you see when you fist walk into house. She added a heart to them also.
Hi there ! Seeing that your comment was over 4 years ago . If you have already completed your swan you noticed that its a little larger then in the video . Ive even noticed myself The fun part is its really relaxing and creative .
razcapapercraft Thank you so much! I made it! I decorated them! You are very and very good for your clear English, for your clear explanation, thanks for video! I made 1/64 and 1/128 it was hard, but possible! Like you!
Hi! I'd like to ask you if you can look over my channel to tell me what I should change in some videos. Pretty please! ruclips.net/channel/UCggvOYjPBr9hubckQjOBiKw
Thank you. This is very nice and well explained. I have written the instructions down as you worked. If you would like the written instructions I would be glad to give them to you.
@@mafelmolinacabanting6841 : 3d origami swan tutorial | DIY Paper Crafts Swan razcapapercraft Put glue on each piece. Row 1 = 28 Row 2 = 27 Row 3 = 26 Add an inverted row below the bottom row (Row 1) Connect the pieces by adding 1 piece to the ends of row 2 and 2 p to row 3 and 1 more inverted piece underneath, making each row 28 pieces per row Increase from 28 to 42 by placing 1 normal piece then, 2 pieces on the next slot all the way around Make 6 normal rows bringing the number of rows to 10 To start the chest place 6 normal pieces Above the 6, place 5 then 4, 3 and 2 Then start the wing by skipping one place next to the first chest row and adding 13 pieces on either side Then 12 pieces on top of the first wing row begin by placing the first piece at the end of the wing row covering the last piece of the first wing row and 1 place on the main body. Continue with another 12 pieces on the next row then 11 by again overlapping the end making 11 on the next row as well. Continue until you have 1 piece at the top. Then begin bending the wings toward each other to form a curve. This creates a slanted edge next to the chest section Create the tail by placing 8 inverted pieces between the backs of the wings and decreasing by 1 piece in each row above that continuing with inverted pieces until you have 1 piece at the top. (none of these rows is doubled) .The neck is formed by connecting 2 pieces with 1 above the 2 then 1 and continuing until you have made 19 rows ending with 1. To make the head or beak place 1 piece over all four points Glue and bend as you form the neck Add an orange or yellow beak made at ½ the size of the other pieces if desired and the eye is simply drawn on To add a colored row use ½ size pieces and begin at the skipped space between the chest and the wing going up to the top of the chest making 4 pieces at the top Then continue up the front of the wing and the inverted pieces on the tail. Then glue the neck to the centerpieces of the chest
I made it once it took me a week to make all the pieces and it was amazing I gifted it to my bestie before moving from the other town and I am making this again for decorating my house thanks alot for sharing how to make it I love your videos alot keep it up 👍👍
Oh my God it is such a beautiful ornament and the meaning of it i like it o lot thank you for showing us how to make it i do really like to try it to make one .but i woul like to kmow what kind of paper i need it for .thanks and God bless your hand for ever .
We made this as a project and I'm quite proud of myself.. I made the biggest swan and the most majestic one in the entire grade 8 level (only the grade 8 was assigned this project) and it actually took about 2 weeks!! It consisted of about 1500+ (i was counting but lost track it might be near 2k) modules which were all made by me (I had to pull of a bunch of all nighters) and at the end spray painted it gold :v (had to tie it near the middle because it was so unstable) thanks to this video I got the highest grade!!
Wow awesome creativity I love to help making similar artwork of yours it really convinced my child teacher she give my son perfect grade its a wonderful that you've been share us thank you so much in viewing your paper artwork its a big contributions to us in easy researchers who haven't talent but to love sharing we won wonderful heart thank you again saving us tous stressed thinking things Godvibes you thanks God you're instruments. Godbless and Goodhealth A loner guy from 1426 A Mata Tondo Manila Philippines.
I always laugh when I see smaller than 1/16. I laughed three times more when I saw that there are even 1/64 for this figure. I laughed 10 times more when I saw you're mixing them. I know it's kinda more stylish with the mixing but 1/64 is ridiculous. I gotta hire ants for this.
I have on hand different colored printer paper A lot of white I have , notice you used black and red I have other colors I like to try just to see how mine would look . Your use of white pieces they appear so clean . Have you been at this type of art for awhile ? Great job my friend . Will you be making other videos of this type ?
there is a flaw in your explanation, the pieces you use make a huge difference, the one beginning step where he makes the curve on the unit, i think plays a huge role on how curvy the model will be, i didn't do that step, so i'm having trouble getting it as curvy as him. ALSO, i didn't use glue, he's using glue, so he can places the pieces together loosely and have them stay put. WITHOUT GLUE makes a massive difference, and kind of takes away from the art of origami to use it. :P Anyways gonna still follow his steps and see if it works without glue. Ill update here, if it works or looks nice anyways.
Hi, a question. Do you fold the modules all yourself, or does someone help you? I am really tedious work .....
Thanks for the videos, have made great egg .... for 3 days
I make all the modules .
razcapapercraft
Respect, because that takes a lot of time
den luk
den luk QUE LINDO TRABALHO 👏👏👏👏
den luk made this in 2 days XD (used 1/64 pieces and folded 5 at same time)
EVERYONE ENJOY MAKEING SWAN, BUT NOT OF MAKEING 3D ORIGAMI PIESES 😅😅😅🤣🤣🤣
Yes,exactly😅😅😅
1000% correct bro🤣
Ahhh its a brainless hobby tho😂
My daughter made these exact ones over a year ago for her brothers wedding from your original video. She added red for her and black for him. They have them sitting up high in a shelf you see when you fist walk into house. She added a heart to them also.
Koakoa45 iut
@koakoa45 what is the size of the ready swan?
ruclips.net/video/hW0mk4zlD8Q/видео.html - How To Make an Origami Flapping Bird - Easy Origami Intructions
Hi there ! Seeing that your comment was over 4 years ago .
If you have already completed your swan you noticed that
its a little larger then in the video . Ive even noticed myself
The fun part is its really relaxing and creative .
I think I will really enjoy it while making this because it looks so interesting #lockdown art for me
If this for u also then hit a like .
I remember making this as a project every year in H.E subjects during my elementary and highschool. We use magazines, brochures and newspapers.
На русском
Sounds fun wish I did that
@@poonamsejra wasnt fun for me i had to fold alot and i still failed
I completed mine today.. thank uuhh😃😃
Very nice. That's beautiful., 👍🤗🤩🤩🤩
I made it at Home in 3 days it was incredible and I love the result. It’s amazing.
What paper did u use
@@Justkrystall for the White ones normal paper and for the red ones too. So that it is a bit more stabil.
@@sophie4736 oh ok thank u
@@Justkrystall no Problem
Hello, what is the size of the paper?
I did it!! A beautiful model!
Thank you
This is so beautiful. I will definitely make this
Por favor traducir al español gracias
Por favor a que equivale 1.32 Una pulgada o centímetros no he podido entender a que equivale. Le agradecería que me explicará gracias
Thx you very much for the video! I really enjoyed making it!
Wait you made it!!!!
@@poonamsejra Yes i did
razcapapercraft Thank you so much! I made it! I decorated them! You are very and very good for your clear English, for your clear explanation, thanks for video! I made 1/64 and 1/128 it was hard, but possible! Like you!
It very very byutyfol model plise contynue ❤️💚💙💛🧡✍🏽👍👍👍👍👍👍
se ve hermoso este cisne, felicidades me gustaria hacer uno igual
Making the origami pieces are pretty tideous .....yet,I finished making the pieces and finished half the model.......thank you @raz paper craft....
Are you an artist this is amazing .
Super Swan model thanks 😍😍😍
I tried it for my school project and its so amazing! Thank you for the tutorial!
Mine too!!
it is sooooooooooooo beautiful.....
I liked it....
it is better than making rose...
Thank you
Gorgeous. Lovely work. Maybe my winter project. 👍💖
Best 3D oragimi in the world. The ducks are so wonderful ever seen 😘😮 in my life
Plz you can make a tutorial how you make piece soo perfect(mai exact)
Salut Răzvan. Îți mulțumesc frumos. Domnul Isus Christos să te binecuvânteze
Cu placere
me encanta su trabajo es maravilloso gracias por compartir su sabiduría con nosotros felicidades
Gracias
+razcapapercraft ю
Gladiz Zamora hcg
Gladiz Zamora GA
En la parte de la.cabeza donde le pone los.módulos rojos No entiendo como se hace
I got 1st in paper crafts because of thisssss😘😍
Superb sir I have tried it for my school exhibition I hope that i will get 1st prize
It's actually awesome 🌟 fabulous fantastic!!! 😘👏👏👏👏
That looks soo beautiful!!! ♡o♡
thank you
It's very useful vedio ....I did same n I got the result thank u so much 😃
with pleasure
just so satisfying to watch..
super je ovakvu tehniku rada do sada nisam imala priliku da vidim ,puno sam naučila od vas
it's ok but when I'm expanding I have a problem I do not know how to terminate the loop with two or four
Hi! I'd like to ask you if you can look over my channel to tell me what I should change in some videos. Pretty please! ruclips.net/channel/UCggvOYjPBr9hubckQjOBiKw
Спасибо за инструкцию, получился шикарный лебедь:)
Belíssimo trabalho, parabéns...
ruclips.net/video/hW0mk4zlD8Q/видео.html - How To Make an Origami Flapping Bird - Easy Origami Intructions
That is so beautiful! You are so talented!
HOW MANY HOURS DO IT NEED TO BE FINISH?
Thank you. This is very nice and well explained. I have written the instructions down as you worked. If you would like the written instructions I would be glad to give them to you.
Can i have the written instructions maam? Tnx
@@mafelmolinacabanting6841 : 3d origami swan tutorial | DIY Paper Crafts
Swan razcapapercraft
Put glue on each piece.
Row 1 = 28
Row 2 = 27
Row 3 = 26
Add an inverted row below the bottom row (Row 1)
Connect the pieces by adding 1 piece to the ends of row 2 and 2 p to row 3 and 1 more inverted piece underneath, making each row 28 pieces per row
Increase from 28 to 42 by placing 1 normal piece then, 2 pieces on the next slot all the way around
Make 6 normal rows bringing the number of rows to 10
To start the chest place 6 normal pieces
Above the 6, place 5 then 4, 3 and 2
Then start the wing by skipping one place next to the first chest row and adding 13 pieces on either side
Then 12 pieces on top of the first wing row begin by placing the first piece at the end of the wing row covering the last piece of the first wing row and 1 place on the main body.
Continue with another 12 pieces on the next row then 11 by again overlapping the end making 11 on the next row as well. Continue until you have 1 piece at the top. Then begin bending the wings toward each other to form a curve.
This creates a slanted edge next to the chest section
Create the tail by placing 8 inverted pieces between the backs of the wings and decreasing by 1 piece in each row above that continuing with inverted pieces until you have 1 piece at the top. (none of these rows is doubled)
.The neck is formed by connecting 2 pieces with 1 above the 2 then 1 and continuing until you have made 19 rows ending with 1. To make the head or beak place 1 piece over all four points
Glue and bend as you form the neck
Add an orange or yellow beak made at ½ the size of the other pieces if desired and the eye is simply drawn on
To add a colored row use ½ size pieces and begin at the skipped space between the chest and the wing going up to the top of the chest making 4 pieces at the top
Then continue up the front of the wing and the inverted pieces on the tail.
Then glue the neck to the centerpieces of the chest
I hope it´ll help me. I make this one for my grandparents
Wow!!! Amazing Swan!!! Thanks for tutorial. I'l try to make it, when have free time...
Thank tou
И Вы тоже тут))) обажаю Вас смотреть)
Can't you suggest me, what will be the size of the ready swan?
wow it's a nice origami I loves it and I like it s a very wonderful
Yes Romanians are really talented.
Wow, a beautiful swan came out
This is beautiful!
This is really great.Veri good.Thank your😍😍😍
Thank you
How did you get perfect pieces?
By cutting all the square papers into perfect shapes. OK? 🤨🤨
I made it once it took me a week to make all the pieces and it was amazing I gifted it to my bestie before moving from the other town and I am making this again for decorating my house thanks alot for sharing how to make it I love your videos alot keep it up 👍👍
thats fantastic! great job!!!
yes
THANK YOU
Oh my God it is such a beautiful ornament and the meaning of it i like it o lot thank you for showing us how to make it i do really like to try it to make one .but i woul like to kmow what kind of paper i need it for .thanks and God bless your hand for ever .
Took me ages but I finally got it
Patta
I made this swan .Beautiful .Thanks for this video
hola podrías sacar un vídeo con la explicación en español es que no entiendo mucho el ingles. Te quedo muy bien esta complicado pero lo vale.
Igual xd
Yo no entiendo inglés
Your all creations and tutorials are the BEST,. Thanks for sharing this tutorial.
Thank you
Excellent art .you should have plastic pieces so we can make within shortest period.really great patience. Thanks.
This is amazing and beautiful, thanks for share
I like this so much and I got first price for. your 🏫😃😃😃😊😊😊
So beautiful!!! thanks for the tutorial!!! keep up the good work!!
Thank you
+razcapapercraft I love them they look easy enough the pairs take the longest time
Tari Amma Angreg key paas giethe kya
We made this as a project and I'm quite proud of myself.. I made the biggest swan and the most majestic one in the entire grade 8 level (only the grade 8 was assigned this project) and it actually took about 2 weeks!! It consisted of about 1500+ (i was counting but lost track it might be near 2k) modules which were all made by me (I had to pull of a bunch of all nighters) and at the end spray painted it gold :v (had to tie it near the middle because it was so unstable) thanks to this video I got the highest grade!!
Congratulations!
Excellent.....job
hmmmmmm very nice 💖 I like it
es hermoso eres el mejor artista que vi
Gracias
razcapapercraft se que res el mejor y nunca te rindas por favor sigue adelante
Παρα πολυ ωρεο.Αλα μου ειναι δυσκολω να δηπλοσω τα χαρτια.👍👍👍👍💕💕💕🍹
Είναι φαντάστηκη.Ειναι λυγο δύσκολο ώμος. 😄👍👍👍👏👏👏👏👏👏⭐🌟
τιχαρτι ινε σινιτοσ Α4 , ΑΜΑ ΦΕΝΕΤΕ ΧΟΝΔΡΟ ΙΝΕ ΤΟ ΧΑΡΤΙ
Вот это даааа, уже начала пробовать. . . Красота! !!!!!
Можете сказать пожалуйста, сколько листов А4 нужно, чтобы сделать одного лебедя??
Скажите пожалуйста сколько сантиметров он сказал когда он показывал листочек
Wow what a origami
Wow awesome creativity I love to help making similar artwork of yours it really convinced my child teacher she give my son perfect grade its a wonderful that you've been share us thank you so much in viewing your paper artwork its a big contributions to us in easy researchers who haven't talent but to love sharing we won wonderful heart thank you again saving us tous stressed thinking things Godvibes you thanks God you're instruments. Godbless and Goodhealth
A loner guy from 1426 A Mata Tondo Manila Philippines.
Thank you very much
;) IM CRYIN DONT JUDJE ME AND I KNOW I SPELL 👆🏻 WRONG IM LAZY LETS BE REAL
Good and you should so many paper crafts .ALL THE BEST
Vel done and very beautiful a very hard👌👌👌💖
sou fã. de quem faz esse trabalho
tbm kkk até que enfim,tem brasileiro por aqui kkkk
🤔
Super. I've tried this is awesome 👌👌
Thank you
I always laugh when I see smaller than 1/16. I laughed three times more when I saw that there are even 1/64 for this figure. I laughed 10 times more when I saw you're mixing them. I know it's kinda more stylish with the mixing but 1/64 is ridiculous. I gotta hire ants for this.
No other Swan video can beat this
I do not understand the last row of the wing, how to close it?
How tf are your pieces always so neat and tiny TT Im following this tutorial right now and I feel like my base is way too smushed together.
Wow this very beautiful thing😍
I really loved it ❤
Thank you
pragati kasaudhan hello good morning
I did this its really superb it looks fantastic. ....
Can't you help me what size the ready swan is turning to be?
I will make a XXL edition for my family, but i dont know if i will finish it...
lol did you finish it?
Cool Model !!👍 Awesome ❤
thank you
I have a question how made that come from paper for make swan
I have on hand different colored printer paper
A lot of white I have , notice you used black and red
I have other colors I like to try just to see how mine would look .
Your use of white pieces they appear so clean .
Have you been at this type of art for awhile ?
Great job my friend . Will you be making other videos
of this type ?
Ich glaub, ich bin die einzigste, die aus Deutschland kommt
ich auch von Deutschaland
Outstanding........It is true that it's difficult but every difficult things are good....I salute your labor..Keep it up...
Te Quedo bonito y casi me salio igual pero lo importante es k te salga 😂😂😜
This is vary vary nice👍👍👌👌👌👍👍👌👌
Nice... Perfect...
👍👍👍very nice👍👍👍
esta dificil pero es super , super bonito y creativo
Gracias !
¿ Qué alto tiene ? y diámetro?
ابداعات جميله و روووووووعه👏👏💋😍
Nice bro I like so much thank u
i have a question when you were folding the paper in 1:38 how can you make it round on the bottom 2:43
Tao Siang use your finger to push the sides out and give it a round shape.
thanks
Oi, gostaria de saber que tamanho mais o menos ele fica após pronto? Obrigada seu trabalho é incrível.
o tamanho das peças é 1/32
Não é o tamanho da peça, mas sim o tamanho final dele totalmente pronto, obrigada
really it's so amazing thankx
hi Thanks u weri nais 👍💖🌷
so nicely u have do this..... 👌👉👍👍👍
Thank you
ربي يعينك. رواع من الجزير تحيتي. لاك
I have made exactly the same I have made six of them orange red black and golden and one was black golden and white golden. Amazing
there is a flaw in your explanation, the pieces you use make a huge difference, the one beginning step where he makes the curve on the unit, i think plays a huge role on how curvy the model will be, i didn't do that step, so i'm having trouble getting it as curvy as him. ALSO, i didn't use glue, he's using glue, so he can places the pieces together loosely and have them stay put. WITHOUT GLUE makes a massive difference, and kind of takes away from the art of origami to use it. :P Anyways gonna still follow his steps and see if it works without glue. Ill update here, if it works or looks nice anyways.
Guess it didn't work
عمل متقن و جميل بالتوفيق 👍👍👍
I really like it but I don't have that much patience
It is very beautiful ❤️
Great job! Your video was so helpful. I made it and i am very proud of it because it was hard but amazing😍❤
I have a question when you connect the pieceses are they supposed to curve by them selves
I curved them myself on the wings but the base curled in its own