A worthy upgrade to the stock shocks is the addition of bleeder caps from the B5/B6 cars. Use part number 91814 to make refilling or reassembling much easier. Love the RB10! ❤
Great video on a car I own. I would argue that this car in competent hands would hold its own against anything more expensive even by TA. It’s not far removed from racer’s previous cars and it’s very tunable. I can agree it’s a great beginner car but I would say if you like this platform, which I do better than mid-motor cars, it’s easier to tune for different track setups. The biggest thing I did for my car was upgrade to 13mm threaded shocks f/r and change the pinion and spur to match track setups. This turned the car into quite the racer. Granted the “pros” have to use what the companies want to promote but most that I have talked to still love this layout of rear motor. Plus I find that parts are more abundant due to the shared platforms from TA. Either way more content on this car is nice to see. Thank you.
I'm sure that in competent hands, a 1990-spec RC10 with modern electronics is going to hold its own against a B6 or 7, or even an RC8B4 in the hands of a novice.
Awesome video guy's, I have been running my rb10 at millend Rcc. It has been quite competitive against more expensive buggies. It suits the track, and practice is helping too 😂
The + offset spring cups help a lot in the rear. There is not a lot of shock body to put the preload clips on. Also, it's relatively low geared, so a bigger pinion gear speeds it up nicely without any heat issues. Overall, I completely agree it is a great beginner buggy
Given that the RB10 is an RTR B4, it should come out of the box as a very neutral and planted buggy. As you mentioned, great for a beginner to learn how to drive with.
I have an RB10 and I had the same issue with the shocks oil leaking. But other than that it’s awesome and sturdy as a tank. It can use 3s though it says.
Help! Just purchased and after the first drive there is now a strange grinding/ whining sound as it accelerates. Brand new to RC cars. Any ideas as to the issue ? Thank you
Are you ever going to get your body scheme painted for it I’m in the process of getting my cars all painted in my race scheme and my next one will be my Losi 22 S SCT can’t wait to see how it turns out with the Silverado body I’m gonna do a body painting video on that can’t wait.
I have the RB10 and just got the RO 1.0 last week. I ran the RO 1.0 on a carpet track and it was AWESOME for an RTR (FOR AN RTR). I am going to setup my RB10 for carpet and test next week.
just got mine cant wait to take it to the track
A worthy upgrade to the stock shocks is the addition of bleeder caps from the B5/B6 cars. Use part number 91814 to make refilling or reassembling much easier. Love the RB10! ❤
Good call
Great video on a car I own. I would argue that this car in competent hands would hold its own against anything more expensive even by TA. It’s not far removed from racer’s previous cars and it’s very tunable.
I can agree it’s a great beginner car but I would say if you like this platform, which I do better than mid-motor cars, it’s easier to tune for different track setups. The biggest thing I did for my car was upgrade to 13mm threaded shocks f/r and change the pinion and spur to match track setups. This turned the car into quite the racer. Granted the “pros” have to use what the companies want to promote but most that I have talked to still love this layout of rear motor.
Plus I find that parts are more abundant due to the shared platforms from TA. Either way more content on this car is nice to see. Thank you.
Good tips
You are so right! (illiteracy) I would smoke this guy with this car stock no matter how much he thinks he can upgrade it.
I'm sure that in competent hands, a 1990-spec RC10 with modern electronics is going to hold its own against a B6 or 7, or even an RC8B4 in the hands of a novice.
2:05 crazy how Phil is the tallest of all my favorite UK 🇬🇧 Rc tubers!
Anywho just got my rb10 out the shed gonna freshen it up and go carpet racing!
I found that sanding down the stock shock caps a little helped fix the seal
Losi have just announced 2 Losi 8ight rtr's and they seem a great option for 1/8 racing for beginners. Buggy and a Truggy.
Yup, got the buggy a few weeks ago and it’s a ripper on a dirt track for sure! 😎🤘 probably pick up the truggy too because why the hell not
Awesome video guy's, I have been running my rb10 at millend Rcc. It has been quite competitive against more expensive buggies. It suits the track, and practice is helping too 😂
Fun car
The + offset spring cups help a lot in the rear. There is not a lot of shock body to put the preload clips on. Also, it's relatively low geared, so a bigger pinion gear speeds it up nicely without any heat issues.
Overall, I completely agree it is a great beginner buggy
Thanks buddy
24 tooth works well
Given that the RB10 is an RTR B4, it should come out of the box as a very neutral and planted buggy. As you mentioned, great for a beginner to learn how to drive with.
It’s actually a B5 with the wider chassis of the B4.
I have an RB10 and I had the same issue with the shocks oil leaking. But other than that it’s awesome and sturdy as a tank. It can use 3s though it says.
Looks like you'll be getting your Super charger Super Htshot sooner rather than later Carl. Nice one.😊😊😊
Fingers crossed
What did you use for weights on front an how much weight did you put please. Am setting my 1 up for carpet racing
Did it leak all that oil?
Screw the hotshot! Keep the B7 😂
Help! Just purchased and after the first drive there is now a strange grinding/ whining sound as it accelerates. Brand new to RC cars. Any ideas as to the issue ? Thank you
Have you checked for sand or stones in the gears … ⚙️ hopefully no damage done but check that the gears are meshing properly.
Will Speed mods coming for Mark?
Are you ever going to get your body scheme painted for it I’m in the process of getting my cars all painted in my race scheme and my next one will be my Losi 22 S SCT can’t wait to see how it turns out with the Silverado body I’m gonna do a body painting video on that can’t wait.
Sounds gooooood
i wonder how it stacks up against the yokomo ro 1.0 rtr......
I have the RB10 and just got the RO 1.0 last week. I ran the RO 1.0 on a carpet track and it was AWESOME for an RTR (FOR AN RTR). I am going to setup my RB10 for carpet and test next week.
What happened to racing the rlaarlos
Hi have you got video please how adjust slipper clutch on rb10 on carpet use
Just turn nut slightly
Fully tightened good
Them stock shocks are leakers. Only downside to these models.
Please can we have less "B Roll" 😅
Do you prefer sausage roll?
Spring roll is nice 😂
Yokomo rookie is a far superior rtr
Might have to get one