Solar water heater. No controller and no pump. Making and installing
HTML-код
- Опубликовано: 1 июл 2023
- Self-made, cheap and simple solar water heater. Suitable for off grid living, no electricity required. No controller and no pump. Made from polycarbonate and CPVC pipes.
For many years we used a solar collector for water heating in our homestead. It was made of tin radiators and covered with double glazing. Over a long period of time, the wooden frame rotted, the glass broke, and the radiator was punctured. We are making and installing a new solar collector for water heating. We will have free hot water in the house.
Watch, relax and enjoy life. Homesteading, slow living, country life
Plastic tubes? Why not copper instead? This will take ages to warm up and longevity is questionable.
Hijole don Oscea si le va a funcionar por que dios es Grande pero el ppr es un material ahislante eso no es eficiente si hiciera si panel con tubos al menis de aluminio otra cosa seria
I like your video! Any idea how much this increases the temperature of the water?
Thank you.
a cool idea using soda cans
Трубы тоже надо было покрасить чёрной краской, белые нагреваются значительно хуже. Народ ещё зеркала добавляет для концентрации света с большей пощади на коллектор.
Am făcut asa ceva acum 25 ani ,dar din cupru.-sau demodat
Direct heat of water instead of inderect so to deposit it I think is not wise.
Добрый день соседи.Как поживает Ваш солнечный коллектор.Тоже задумываю изготовить похожий или прототип. Эффективней пластик после использования металлических радиаторов ?Что посоветуете ?
Jaka temperatura na wyjściu?
Isnt adding a reflextive surface like mirror or aluminium foil on the bottom of the collector increase it's efficiency? As you build it, the black paint will heat up the wooden exterrior and not the pipes. Also how does the heat transfer liquid circulate without a pump, won't it cause the heating agent evaporate in the heatpipes and cause a system leak?
Bardzo podoba mi się ten film. Prace wykonywane bardzo spokojnie. Tak myślałem że będzie to mało wydajne. Za mało rurek. Dziękuję za film,
U mnie kaloryfer pomalowany na czarno i grzeje wodę w bojlerze na 50 litrów i mam cały dzień wodę do kąpieli i zmywania a koszt budowy wyniósł mi zero złl
А нельзя озвучить видео? Зачем мне слышать звук дрели? Я хочу смотреть видеоряд, а не читать субтитры
Интересная идея. С учётом многих комментариев о КПД, можно комбинировать такой коллектор. Спаять из полипропилена нижнюю и верхнюю части с отводами под резьбовые соединения нужного диаметра и соединить с металлическими вертикальными трубами. И КПД возрастёт и сборка с обслуживанием останется не сложной.
Okay. So I'm about to make a slightly modified version of this. So here's a question I have for some of you who have done something similar. Would it be possible to instead of isolating the heating coils and heating up the water in the tank with those heating coils couldn't do double duty? Safe for instance the water ran to the pipes and heat it up then it went through the coil that ran through the water heater heating the water inside and then finally it dumped into the water heater topping it up as it went increasing the water heaters capacity for hot water. It seems logical to me but if somebody can point out a inconsistency or some reason it wouldn't work I would greatly appreciate it before I tried
ascolta ma lo fai seguendo un progetto serio funzionante e sicuro o stai facendo tutto questo tanto per perdere un po di tempo e farci il solito video da ritardati come fanno in molti?
Todel kad paksciai nemato stiklo..atsitrenkia ir zuva
Делал такую утюгом,трубу покрасить в чёрный кпд +30 %.Проработала около 3 лет потом стала протекать. Сейчас делаю другую без утюга .
Без страховки на крыше? Мда...