How to Access Johnson Controls NAE without knowing IP Address
HTML-код
- Опубликовано: 8 сен 2024
- Gaining access to the configuration is critical in adding and replacing an NAE or NCE within your system. Sometimes gaining access into the configuration of the device can be a challenge if you do not have the correct information at hand.
Support the channel by becoming a Patreon: / systemcontroltech
Here are some of the things I keep in my tool bag.
Backpack: amzn.to/2tDnYsC
My screwdriver: amzn.to/2uPyIDV
Small fuse puller: amzn.to/2uPIdDk
Combination fuse puller: amzn.to/2vB0dPf
Adjustable wrench: amzn.to/2us3akS
USB to Serial converter: amzn.to/2vAKHTD
Network cable: amzn.to/2vBpJE0
Network switch: amzn.to/2eHsIa7
Hex Key set: amzn.to/2eHvA6C
Fluke meter: amzn.to/2tDaZHj
Fluke temperature meter: amzn.to/2tDxnQO
Dell 32 bit laptop: amzn.to/2us2Z9n
Serial cable: amzn.to/2eHvyf8
Johnson Controls DX-9100-8454 amzn.to/38VgLni
Johnson Controls DX-9100-8990 Back Panel: amzn.to/2IPQa0H
Johnson Controls AS-UNT110-1 - UNT Controller amzn.to/32CVnBB
Johnson Controls, Inc. Unt Series Unitary Controller amzn.to/2SpZCM9
METASYS AP-VMA-1440-0 APVMA14400, VMA Controller, amzn.to/2St5eW3
Johnson Controls, Inc. Fx Vma amzn.to/2XWEPFS
Johnson Controls Metasys NAE MS-NAE5521-0 amzn.to/2Yhyvbn
TRENDnet USB to Serial Converter, amzn.to/2JOxH4y
Johnson Controls T-4000-119 Allen Head Adjusting Tool: amzn.to/2Ygf7LS
Johnson Controls T8590 Residential High-Resolution Color Touch Screen Digital Room Thermostat amzn.to/2JVUhZf
Johnson Controls A99BB-600C Penn Series A99 PTC Temperature Sensor amzn.to/2Ycet1R
Johnson Controls P70LB-6C Dual Pressure Control, SPST amzn.to/2YhO8zq
Johnson Controls VA-4233-AGA-2 Electric Actuator, amzn.to/2JVVcZH
JOHNSON CONTROLS METASYS MS-FEC2610-0 MS-FEB2610-0 CONTROLLER amzn.to/2JT1Qj8
Johnson Controls M9220-GGA-3 amzn.to/32HRVpm
Thanks you are amazing. Keep the good work, there a lot techs out there, who appreciate your videos.
Thanks for watching
Thanks for the info very much appreciated.
Thanks for watching
Thanks Dude its helpful for me.....
Glad to help
Hi,
Is there a way that I could change ip address for my JCI NAE controller with out launcher?
If so please advise on the steps.
The only other way is to use sct and select it as part of the options
Did a port dump on NAE 55. Everything comes up but the I P address is all zeros and DC HP is disabled. I have the device name and the device MAC address but that’s it is there another way to get him to reset the IP address back to what it supposed to be
You should be able to access the device simply by using the mac address and you can set the ip to whatever you need it to be. You can also change the DHCP enable from the configuration tab when you are logged into the device.
Interesting video, thanks. Do you have a procedure to access the data the NAE/NCE is spitting out without using metasys? We have a building that was turned back over to the owners, and the NAE was removed from our system and I want to be able to help the occupants out by either them or the owners being able to read the AHU values. Thanks.
Once you gain access and get the IP address you should be able to log into SMP if you have the credentials
Hi. I have a DB9 male in my serial to USB converter. In this case, I need the DB9 female-female null modem or a straight-through cable?
You should be able to get one on Amazon
Hello SCT! I’m new to the field, came from HVAC. I’ve got a MAP Gateway. Does hyperterminal work with that type of connection and how do I get the MAP to connect to the CCT? Which IP do I use to connect it?
Hyperterminal is made to connect through a com port. I don't believe you will be able to connect with it that way.
Thank you for that information.
What if the customer no longer has the user credentials?
We are attempting to take over a building that was sold recently.
Thank you!
You may need to contact jci or re image the device.
@@Systemcontroltech
Thanks for the advice,
Your videos are always very helpful.
Hello, Mr.dude.from NAE port that hyper terminal cable connected through the modem. or to the loptop.?
Use a printer cable to connect using hyperterminal
Thanks a lot for your vedio
Can explain in vedio how to download a Turboboot to NCE please
Check my channel
hello sir,
I don't remembre the identification for access at Launcher NCE, can you help me please ?
You can explain to me how to do reset of NCE ?
Thank you,
You will need to contact Johnson Controls
@@Systemcontroltech okk thank you!!
How do I use my Johnson ASLCPKEY-0 (facilitator)to program my DX-9100 8454 ?
Never heard of it.
I followed your instruction and was able to obtain the IP address. But I cannot connect to an NAE via ethernet because, previously, someone had set the IP address to 0.0.0.0. Please advise. Thank you so much for your videos!
If you're using the launcher tool use the mac address of the device. Dont put spaces or periods between the numbers
Thank you for your response. After realizing that the NAE was DHCP enabled, I connected to our company network and an IP address was then assigned. From there I was able to connect via the assigned IP address using Launcher. Thanks again for sharing your invaluable knowledge on Metasys.
@@Systemcontroltech Can you do that? I was in a jam today and I never knew you could do that. I ended up using wire shark instead.
Great trick.
But this doesn't work at the latest firmware.
No Ip adress info
I've got an updated video on it
can you plaese post a video how to set up launcher application for the first time.
Thanks
+lenny cordero i will see what I can do
hello sir, What is that software and I want to know the name of that software. Would u tell me that?
This is the metasys software . The individual devices will have a version embedded into them but the server software is.
Actually the issue iam facing while configure the BAcnet router
Some are network specific
Hi how are you.
Do you have a video that shows how to upgrade NAE version
Not yet but the upgrade will depend on the version you are wanting to upgrade to. 8.0 allows you to upgrade directly from the server.
System Control Tech .
Thanks for the reply.
I'm currently have an NAE at 6.0 version . I would like to upgrade it to 9.0
With the software SCT and using the NUT tool from JCI.
Is what I like to know how to do the process.
Thank you
The easiest way would be using sct and selecting code download. If you are using the newest version
System Control Tech code download? I'm sorry I guess I'm missing that part.
Thank you again
Good luck.
Por favor sotfware plc Johnson control
Contact Johnson Controls
good night friend, my tools were lost, I need to buy a copy of the NIC, SCT and ADS software for the NAE. Are you interested in selling me a copy of this software?
You will need to contact Johnson Controls