just started drivind a brush would be really good if you can do a few videos of cleaning filters etc please i havent been trained so any help would be good
it has been a long time I did this, but there is such setting, however it might be protected by pin. Sorry that can't help you, am not on sweepers anymore and don't remember exactly to be able to guide you through
It has been a while since I did this job but remember that centre brush has to be adjusted with remote. But before that has to get into specific menu where see a brush and voltages on the screen. Then by holding one of the buttons (can’t remember which) on the remote can press either left or right button to change voltages which one change left/right side pressure of a middle brush. Hope that gives an idea for you
Menu 10 Start donkey Left arrow for centre brush to sweep to the left vacuum. ( same principle for the right) . Adjustment as directed with remote control . Even tho it comes down auto I find having your brush settings at 1.3 for both sides and same principle when centre brush is pointing to the right while give you a good even coverage . In saying all that you must have a broom that isn’t coned . Put a new centre broom in and use those settings for a perfect level sweep . It works for me .
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Thanks spent two weeks with that alarm going off lol much appreciated
Lol, no problem 😁🤟
How do I change the buttons for the hopper box up and down please thanks
just started drivind a brush would be really good if you can do a few videos of cleaning filters etc please i havent been trained so any help would be good
My Side Brushes Always Come Down & Stay Wide outside How to setup to Stay Inside So I can Move out when ever I need
it has been a long time I did this, but there is such setting, however it might be protected by pin. Sorry that can't help you, am not on sweepers anymore and don't remember exactly to be able to guide you through
Go to menu 14 and I believe the code is 88335
How do you regenerate the dunckey engine
Hello, can my help, I’m having problems with monitoring shows wait colour on Johnson sweeps 200 , vote me during?
Do you happen to know how to adjust the centre brush as mine isnt sweeping evenly. Any help greatly appreciated.
It has been a while since I did this job but remember that centre brush has to be adjusted with remote. But before that has to get into specific menu where see a brush and voltages on the screen. Then by holding one of the buttons (can’t remember which) on the remote can press either left or right button to change voltages which one change left/right side pressure of a middle brush. Hope that gives an idea for you
@@tonyr7598 cheers. Menu 10 with donkey running and it's in there.
Got mine set on 1.5 either side. Belly brush wears equally now 👍
Menu 10
Start donkey
Left arrow for centre brush to sweep to the left vacuum. ( same principle for the right) .
Adjustment as directed with remote control .
Even tho it comes down auto I find having your brush settings at 1.3 for both sides and same principle when centre brush is pointing to the right while give you a good even coverage .
In saying all that you must have a broom that isn’t coned .
Put a new centre broom in and use those settings for a perfect level sweep .
It works for me .
hi, i need your help regarding johnston sweeper machine
What company do you work for
I switch on emergency switch then switch off ingine but shwo now emerjance light how to close
What model is that please ?
Anyone know how to reset service light on the centre console for the donkey engine?
That’s what I’m trying to figure out
@@patrickoshea9527 doing my head in still
The alarms are going off for a reason maybe service the vehicle hey .