Tools used: -Silverline Trim Tools: amzn.to/313HvQf (5-piece set) amzn.to/2U86C2T (11-piece set) -Small Flat Screwdriver: amzn.to/2U7aEZq (included in this set, good for most small jobs) -Philips Screwdriver: amzn.to/2U7aEZq (included in this set, good for most small jobs) After removing the door card panel, other jobs can be done such as: -Removing the outer door handle: ruclips.net/video/1soH6JZimgQ/видео.html -Removing the window regulator: ruclips.net/video/AbqSoJ_qoMA/видео.html -Removing the wing mirror: ruclips.net/video/vGhs8g8R2NY/видео.html
This is how all RUclips how to videos should be done. No guff. No 15 mins of advertising or talking about screwdrivers and 2 mins to do the job. Just straight to the point. Thanks pal.
This is absolutely brilliant, as is the other video on fitting a new wing mirror. It's very difficult to go wrong as it's so well explained. Thank you.
No, the panel that the switch is located in is attached to the door card with screws that are only accessible from the rear, so the door card has to be removed.
For some reason after removing and replacing the door card, the driver control switches for the windows don't work, and the window switches on each other door (passenger, rear L, rear R) don't work. Any ideas? I'm thinking relay or fuse but i checked the 40a relay under the hood and it was fine. Same with the 20a fuses for each window in the footwell fuse box. The electronic mirror adjuster controls still work fine in the driver door, but nothing else does.
@@SelectVehicleSpares I didn't actually disconnect the door card wiring connectors when i took the door apart to swap the mirror unit out, so assumed that they'd still be good. Will double check the connectors are fully seated.
Tools used:
-Silverline Trim Tools: amzn.to/313HvQf (5-piece set) amzn.to/2U86C2T (11-piece set)
-Small Flat Screwdriver: amzn.to/2U7aEZq (included in this set, good for most small jobs)
-Philips Screwdriver: amzn.to/2U7aEZq (included in this set, good for most small jobs)
After removing the door card panel, other jobs can be done such as:
-Removing the outer door handle: ruclips.net/video/1soH6JZimgQ/видео.html
-Removing the window regulator: ruclips.net/video/AbqSoJ_qoMA/видео.html
-Removing the wing mirror: ruclips.net/video/vGhs8g8R2NY/видео.html
This is how all RUclips how to videos should be done.
No guff. No 15 mins of advertising or talking about screwdrivers and 2 mins to do the job. Just straight to the point.
Thanks pal.
This is the clearest demo I've seen of this procedure - thanks mate.
This is absolutely brilliant, as is the other video on fitting a new wing mirror. It's very difficult to go wrong as it's so well explained. Thank you.
Thanks for the share bud. Good stuff ,made it a breeze to do on my fd2.
They aren't Posidrive screws, they are JIS, much better fit if correct screwdriver used 😎 Great video, thanks guys❤
Excellent video! I managed to take my door panel off without breaking any anything 👌👌👌
Perfect vid. Nice and simple, no flannel 👏
Amazing video!
Thank you Chaval!! 😉😉
Nice, thank you for that 😊👍
Great video. I have to do it on my but I feel like my old clip (2009) are going to snap. Don’t you think?
i have a replacement speaker for the front driver door i am wondering if there is enough space to replace it without unplugging the cables
Can i change the speaker at 2:04? Or do i have to do the other steps also?
Yes, you can change the speaker when the door card panel is removed.
Can you remove the window control panel without removing the door card?
No, the panel that the switch is located in is attached to the door card with screws that are only accessible from the rear, so the door card has to be removed.
For some reason after removing and replacing the door card, the driver control switches for the windows don't work, and the window switches on each other door (passenger, rear L, rear R) don't work. Any ideas? I'm thinking relay or fuse but i checked the 40a relay under the hood and it was fine. Same with the 20a fuses for each window in the footwell fuse box. The electronic mirror adjuster controls still work fine in the driver door, but nothing else does.
It sounds like something isn't connected. Have you checked that everything is plugged back in correctly?
@@SelectVehicleSpares I didn't actually disconnect the door card wiring connectors when i took the door apart to swap the mirror unit out, so assumed that they'd still be good. Will double check the connectors are fully seated.
Can the door card be removed if the door is locked shut ?
Yes, but it will be much more difficult, and you risk damaging the door card as you may have to remove it starting at the top.
How to put it back and fit all the clips on their places ?
Do what he did in reverse