А то что этот пояльник не может разагреть эту скобку видно же прям на видео, когда он поднгсит её к пластику скоба красная и она мгновенно остывает, это значит что он её разогрел горелкой и приложил! Получается красиво, НО ОБМАН ПРЕСУЦТВУЕТ)
Тут главное на просмотрах заработать, а результат мало кто захочет проверять. Но вот если взять старый советский паяльник пистолет, то эту идею можно реализовать. Там нагрев жала через низковольтный трансформатор. Думаю вы меня поймёте.
I'm gonna buy one instead, seems like making one isn't worth the time. However, that jig you created for making new inserts is brilliant and I'm definitely making one for myself!
There's no way that the soldering gun could couple enough heat to even heat the wire enough to even work on a coke bottle without waiting for at least 30min per wire, you'd have more luck with the wire element style that you hook directly into the gun
@@jennyjansen754 at the tip of the soldering iron yes, but there's no possibility that the wire ever got that hot as seen in the video without the help of a jump cut in the video and the help of a blow torch,
A good way to reinforce broken thermoplast pieces. They will never be good as new, but much better than broken. You can additionally seal the crack with a soldering iron to make it water tight again.
Да херня это самая настоящая - с похожей херни и случился первый рецидив у Евгения Матвеева и появился доктор))) Только в отличии от той херни тут ещё и проволока ахрененного диаметра
Это бред, хотя бы по тому что паяльник жало максимум нагревает до 450 градусов, а тут метал красный, да и вообще пластик паяется пластиком а скобы это фуфло
@@ГеннадийКизимов Полностью с тобой согласен! Я лично использую горячие скобы чисто для фиксации трещин чтоб потом сварить пластиком, а скобы я убираю, в пластике не оставляю.
WOAW!!! Probably one the most interesting way of doing a vid!!! And I’m not joking when I say that I was totally impress by the overall project. The technic by itself is impressive, but what you did to showed us how you did it was so intelligent and interesting and entertaining! Hat’s off to you my friend!!🎉🎉🎉🎉🎉🎉
Remember for your future videos, you've got caught in red handed 😋 first two welding pins are clearly visible that is glowing red so heat gun dont have that much heat normally so you have heated those pins externally... If those pins aren't heating to the degree of plastic melting point then increase the contact area of those tiny contact points where heat is transferred to pins from the heat gun, but your presentation and style is awesome n videos are informative 👌♥️ #See & Build
It's easier to get a soldering pencil with a flat tip and then press a zip tie into the plastic and ACTUALLY weld the plastic together. Not only do you get a better weld but it usually is waterproof and alot less time consuming.
Yes absolutely right. But it is not very strong. If both methods are done together, it will be strong and waterproof. Thank you, dear friend, for watching the video and commenting.🙏🌹
I use a soldering iron, or a nice wood burner will work well also. And a nice assortment of wide tips for melting both sides at one time while using a zip tie to be the filler strip.
@@seebuild9276 ⚠️ God has said in the Quran: 🔴 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )} 📖Quran
This contraption also exist as a commercial product. Its ment for applications where where you need more strength and works best in combination with the glue you described.
Конечно прав, так как через проволоку ток не проходит, площадь соприкосновения с приблудой у неё мизерная и + она надкушеная, то с какой стати ей разогреваться сильнее чем эта недонасадка на паяльник. Автор далеко не всё нам показал, обманщик
Какой бред. Автор тебе не лень было делать этот мусор. Нагрев должен быть током а не спиралью накаливания. Устанешь ждать. Если нужно 100 скоб поставить уйдет день с такой игрушкой.
It's not just a question of cost. It is about the pleasure of using a tool that you have made with your own hands. Thank you dear friend for watching the video and leaving a comment 🙏🥀
There's no way that the soldering gun could couple enough heat to even heat the wire enough to even work on a coke bottle without waiting for at least 30min per wire, you'd have more luck with the wire element style that you hook directly into the gun where it would actually show the heating shown in this video
You, and almost everyone who commented here, have to be kidding me. 1) To bend the wire like that you can use a FORK. 2) This is not welding. 3) This is only "ok" for cracked plastic where the dimensions match the wire. Come on man, seriously.
Yes . Certainly, it cannot be compared with its industrial and commercial example. Thank you dear friend for watching the video and leaving a comment🥀🥀
I didn't understand what you meant, dear friend, maybe it's because of Google translation. In any case, thank you dear friend for watching the video and leaving a comment🙏🥀
В момент, когда демонстрировались удивительные способности этого преспособления, невольно возникали два вопроса ..? Как долго протяну ножки верстка, прежде чем отпасть от лёгкого нажатия на устройство..? И что вы купите..?🤦🤣🤣🤣
Все видео думал да что же он за хрень делает, досмотрел до конца и понял, у автора совсем нет денег на нормальный заводской аппарат, совсем видимо в Америке дела плохи.
А то что этот пояльник не может разагреть эту скобку видно же прям на видео, когда он поднгсит её к пластику скоба красная и она мгновенно остывает, это значит что он её разогрел горелкой и приложил! Получается красиво, НО ОБМАН ПРЕСУЦТВУЕТ)
It is done with a powerful soldering gun and a little patience. Thank you dear friend for watching the video and commenting.🙏🌹
Тут главное на просмотрах заработать, а результат мало кто захочет проверять. Но вот если взять старый советский паяльник пистолет, то эту идею можно реализовать. Там нагрев жала через низковольтный трансформатор. Думаю вы меня поймёте.
@@Марат-щ8л можно еще к возжигателю подключить. я помнится подобным способом скобы впаивал в мотопластик
@@anton86654 Да, выжигатель для этого дела тоже удобны.👍
@@Марат-щ8л не тянит такой импульсник .60ват не хватает для нагрева.
I'm gonna buy one instead, seems like making one isn't worth the time. However, that jig you created for making new inserts is brilliant and I'm definitely making one for myself!
I am very happy that you liked it. Thank you, dear friend, for watching the video and leaving a comment 🥀🙏
If you are interested in paper crafts (origami), don't miss this channel 👇
youtube.com/@DIY_PaperFold
Всё норм, но такой паяльник не сможет нагреть столь массивную приблуду, тем более до красна, как это видно на первых двух скобах при припаивании
не придирайтесь к мелочам :)
There's no way you heated that to red hot with the soldering gun.
O
There's no way that the soldering gun could couple enough heat to even heat the wire enough to even work on a coke bottle without waiting for at least 30min per wire, you'd have more luck with the wire element style that you hook directly into the gun
If it will melt solder it will easily melt plastic.
@@jennyjansen754 at the tip of the soldering iron yes, but there's no possibility that the wire ever got that hot as seen in the video without the help of a jump cut in the video and the help of a blow torch,
I agreed….he definitely heat it with flame,lol….
It would take eternity to just heat enought…not to mention red hot.😂
A good way to reinforce broken thermoplast pieces. They will never be good as new, but much better than broken. You can additionally seal the crack with a soldering iron to make it water tight again.
Yes, it is . Thank you dear friend for watching the video and commenting 🥀🙏
Это то когда будешь заморачиваться с этой приспособой,, 2недели" и пригодиться она дай бог раз в жизни и то сомнительно....
Да херня это самая настоящая - с похожей херни и случился первый рецидив у Евгения Матвеева и появился доктор)))
Только в отличии от той херни тут ещё и проволока ахрененного диаметра
А самое прикольное, что это нае6алово. Видно он горелкой эти скобки греет за кадром
Это бред, хотя бы по тому что паяльник жало максимум нагревает до 450 градусов, а тут метал красный, да и вообще пластик паяется пластиком а скобы это фуфло
@@ГеннадийКизимов Полностью с тобой согласен! Я лично использую горячие скобы чисто для фиксации трещин чтоб потом сварить пластиком, а скобы я убираю, в пластике не оставляю.
WOAW!!! Probably one the most interesting way of doing a vid!!! And I’m not joking when I say that I was totally impress by the overall project. The technic by itself is impressive, but what you did to showed us how you did it was so intelligent and interesting and entertaining! Hat’s off to you my friend!!🎉🎉🎉🎉🎉🎉
Thank you dear friend. I am very glad that you liked it 🥀🙏
This is very inspiring, how to make a plastic welding machine... wow, this is very valuable knowledge, bro...
A detailed parts list would be a great addition to video
Great music! One of my favorite songs
용접기기술 대단하십니다
Remember for your future videos, you've got caught in red handed 😋 first two welding pins are clearly visible that is glowing red so heat gun dont have that much heat normally so you have heated those pins externally... If those pins aren't heating to the degree of plastic melting point then increase the contact area of those tiny contact points where heat is transferred to pins from the heat gun, but your presentation and style is awesome n videos are informative 👌♥️ #See & Build
Срочно вызовите Доктора Дью. ГЛАЗА!!
🤔🤔😐😐
Idenya cukup menarik
Thank you dear friend for watching the video and commenting 🌹🙏
Very Good, wonderful
🙏🌹
Cant say its practical over buying one, but still a very good video and kept me entertained, good job i like your editing style👍💯
Dear friend, I am very happy that you liked the video. Thank you🌹🙏🌹🙏
Amazing idea!
Good homemade plastic welder 👍
Thank you very much, dear friend 🌹🙏
Boa ideia. Parabéns
Aku juga suka restorasi las mengelas plastik .
Thank you 🙏🌹
It's easier to get a soldering pencil with a flat tip and then press a zip tie into the plastic and ACTUALLY weld the plastic together. Not only do you get a better weld but it usually is waterproof and alot less time consuming.
Yes absolutely right. But it is not very strong. If both methods are done together, it will be strong and waterproof. Thank you, dear friend, for watching the video and commenting.🙏🌹
You're a genius bro👍👍👍
thank you very much dear friend 🙏🌹✋
I use a soldering iron, or a nice wood burner will work well also. And a nice assortment of wide tips for melting both sides at one time while using a zip tie to be the filler strip.
Impressive.
Nice build…..but I’ll just buy one……save me time and headaches getting wha I’ll need to make this tool.
Woow very good
Thanks 🙏🌹
Great video, only the staples went in the wrong orientation.
i really like your editing, it is also a good talent 😊♥️
Thank you my dear friend 🥀🙏
I like the editing.
🌹🙏
Que genialidad solo me falta la pistola y listo
Very nice
hank you dear friend for watching the video and leaving a comment 🙏⚘
@@seebuild9276 ⚠️ God has said in the Quran:
🔴 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )}
📖Quran
Super.
👍great
Thanks 🙏🌹
Muito bom vou imitar👏👏👏
🙏🥀
Nice! but I would rather use torch to heat randomly customized wire 😰
Сколько паяльнику нужно времени чтобы разогреть ?
Вероятно очень, очень, очень, очень, очень, очень, очень, очень, долго! 🤦🤣🤣🤣🤣🤣🤣
@@Waterpass. ты не прав, всего лишь в пару раз дольше чем ты написал))))
@@igor0874 очень серьёзное устройство, мог и ошибиться 🤣🤣🤣
@@Waterpass. в таких сложных устройствах ошибки допускать нельзя!😂🤣
Он разогревал горелкой, это можно и без паяльника делать
Very good option for firm welding
Thank you my dear friend 🙏🥀
BRAVO OTTIMO lavoro 👏👏👏
Super
Why the wire is red hot at the middle 5:56 ??
اللهم انصر
ر اهلنافي غزة عل من ظلمهم واخذل من خذلهم وبدد شمل عدوهم إنك على كل شيئ قدير
Super sar
.
Metal me hole 🕳 karne liye jo panch apne use kiya he vo kese banyege ghar pe.
Idea dijiye
BRAVO .Great job thank you very much.👏👏👏👏👏👏👏
Excelente
Just use bend flat screwdriver head and get some scrap plastic and melt it into the crack. This way it won't leak
Yes, it is . Thank you dear friend for watching the video and commenting 🥀🙏
👍👍👍👍👏👏👏👏
OTTIMO lavoro 👏👏👏
Thank you dear friend for watching the video and commenting 🙏⚘
Жарайсын
You can buy one and loads of assorted staples for a tenner brand new by the way don't admit you did the welding
it's true . You can buy it, this is just an idea. But I do not agree about welding 😉. Thank you dear friend for watching the video and commenting🙏🌹
👍👍👍
🙏🌹
That's not welding, that's cramping.
A weld would make it water/air tight. That most certainly is not.
Seven minute video on an uncompleted job at trying to fix a hospital 🛌 🧫.
We all now what it is, but he still did a great job building it.
They make special glue that will mend and seal issues like that much better then that contraption , so what’s the point?
This contraption also exist as a commercial product. Its ment for applications where where you need more strength and works best in combination with the glue you described.
Each method has its advantages and disadvantages.
Thank you for watching the video and leaving a comment 🙏🥀
Nice build! I’ve needed a plastic welder for a while now I’m going to try this build for myself just what I needed thank you. 😊
Thank you dear friend. I am very glad that you liked it 🥀🙏
Very good job! 👏👏👏👏👏👏👏
Thank you dear friend for watching the video and leaving a comment🙏⚘
Огонь идея
Я же правильно понимаю, что на 6:05 автор нагрел проволоку горелкой???
Конечно прав, так как через проволоку ток не проходит, площадь соприкосновения с приблудой у неё мизерная и + она надкушеная, то с какой стати ей разогреваться сильнее чем эта недонасадка на паяльник. Автор далеко не всё нам показал, обманщик
Очень правильно понимаете! Возник такой вопрос, зачем все эти танцы с бубном если в конце скобы нагревать горелкой.
Не правильно понимаете...на 6:05 он всех развёл как лохов!
Какой бред. Автор тебе не лень было делать этот мусор. Нагрев должен быть током а не спиралью накаливания. Устанешь ждать. Если нужно 100 скоб поставить уйдет день с такой игрушкой.
Perfect
Зачем эти танцы с бубном если в конце скобы нагревать горелкой. Автор явно лохонулся, но понял это в конце. 🙂
🇧🇷😲
They're not that expensive... How many hours did it take to build this? If I paid you $20/hr to build me one, how much would it cost?
It's not just a question of cost. It is about the pleasure of using a tool that you have made with your own hands. Thank you dear friend for watching the video and leaving a comment 🙏🥀
@@seebuild9276 subscribed just for this comment, although I thought I already was!!!
В этом ролике только музыка классная.Кто исполнитель?
0.35 really that gloves do that 😅
🤔🤔🤔🥀🙏
Very clever! One of the best diy videos! Good job.
Thank you my dear friend 🙏🥀
If I buy directly don’t waste time and money 😂😂😂😂
Каким образом зигзаг разогревается докрасна, если это просто насадка на паяльник? 5:56
Никаким. Газовой горелкой за кадром.
Он использует нано-технологии, и с помощью магнитно-резонансного пи**дунца-втиралеля получается данный эффект))
👍👍👍👍👍
🌹🌹🌹🙏🙏🙏
Amazing
🥀🙏
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻Sin palabras
Nice, professional build there pal. I'm impressed.
🥀🥀🙏🙏
All went well until the welder came out!
🤔🤔🙏🌹
Wow look too easy for me and save for me $$$
I'm glad you liked it, thank you dear friend for watching the video and leaving a comment🙏🥀
Would have had a new sub,but I can't take the "music" in it so I'll never know.
👏👏👏
thank you dear friend for watching the video and leaving a comment🥀🙏
Or buy it for $20 and save 5 hours of time and loss of heater gun...
Profesyonel
🙏⚘
There's no way that the soldering gun could couple enough heat to even heat the wire enough to even work on a coke bottle without waiting for at least 30min per wire, you'd have more luck with the wire element style that you hook directly into the gun where it would actually show the heating shown in this video
If you have a strong soldering gun, it will take about 2-3 minutes. Thank you dear friend for watching the video and leaving a comment.🙏🥀
Genial
Thanks 🙏🌹
Не нагреет до красна, это фейк
You, and almost everyone who commented here, have to be kidding me.
1) To bend the wire like that you can use a FORK.
2) This is not welding.
3) This is only "ok" for cracked plastic where the dimensions match the wire.
Come on man, seriously.
Oh yes . Thank you dear friend for watching the video and leaving a comment
용접불꽃은왜안가리냐
The staples are heated using the heat of the soldering gun. Thank you dear friend for watching the video and leaving a comment🙏🥀
You had better buy the plastic welding tools.
Yes . Certainly, it cannot be compared with its industrial and commercial example. Thank you dear friend for watching the video and leaving a comment🥀🥀
Гумно на палочке, если честно. Нагрева не будет. У нормальной "сварки" электронагрев спирали.
I didn't understand what you meant, dear friend, maybe it's because of Google translation. In any case, thank you dear friend for watching the video and leaving a comment🙏🥀
В правильном устройстве проволока нагревается за счет протекания по ней электрического тока.
5 rupiye k fevistick se chipak sakti he esa lavra lasun karna jaruri tha
Para quienes no tenemos una soldadora de metal mejor con $400 la compro y van incluidos los clips
It is a pleasure to use a tool that you have made with your own hands. Thank you dear friend for watching the video and leaving a comment🙏🥀
В момент, когда демонстрировались удивительные способности этого преспособления, невольно возникали два вопроса ..?
Как долго протяну ножки верстка, прежде чем отпасть от лёгкого нажатия на устройство..?
И что вы купите..?🤦🤣🤣🤣
🙏🥀
@@seebuild9276 🍄🍄🍄🍄🍄
Паяльник не нагреет скобы, навидео обман
Когда коту делать нечего
Guys this is so fake. There’s no current passing through the wire he is heating it up with a lighter.
No entendí para qué sirve
For welding broken plastic parts.🙏🌹
So much work to few result. Aff... Very bad.
Ich verstehe den Sinn nicht.🤔
A machine for welding plastic. Thank you dear friend for watching the video and leaving a comment
NICE :)
Fake , Look at the glowing Wire no elektrical connection
Why the super annoying music?
Really?
Isn't it boring without music?
Все видео думал да что же он за хрень делает, досмотрел до конца и понял, у автора совсем нет денег на нормальный заводской аппарат, совсем видимо в Америке дела плохи.
Super Glue: You never heard of me ? I've been around since 1942 bro! It's way easier, stronger and safer use me than you through all these bro..
Yes you are right. But each method has its advantages and disadvantages. Thank you dear friend for watching the video and leaving a comment 🥀🙏
This is a lie! This design will not be able to heat the wire to red! ,😡
If you have a strong soldering gun and wait a little, it will be done. Thank you dear friend for watching the video and leaving a comment🙏🥀
tidak semudah itu
Ini bekerja dengan baik
Terima kasih kawan sudah menonton video dan berkomentar 🙏🥀