I think the best way to get Alex to Notice you at this point is just to park outside his Shop in a Van with the words "FREE DONOR BOARDS" painted on it. Love your vids Alex!
I purchased a few of those laptops for our small business and 2 of the 4 that we purchased suffered button failure. I replaced the button myself.....when I opened the laptop and looked at the design I thought to myself: really? HP? This is a good design? They only kept that button model for less than a year....HP obviously had to replace many of them under warranty. Thanks for another great video.
in the first minute I realized I do not have the same issue, but I stayed because you were doing such a good job at explaining everything I wanted to see it through.
Your concise description of fault/option/repair detail, is beyond reproach. It's so good to re-live such moments of 'tronics-repair success. Satellite Rx repair was my little corner but then eye-specs surface-mount-tech and pension took over. Here's a quiver hand shake and Thanks, to you.
Man, you're such a good teacher I knew every step you'll do just looking at the board state (wouldn't be able to do them, but I got the theory), I'm no technician, I just watch your vids cause I find them relaxing.
Also i think i am gonna start ordering supplies from your website. I love how you actually show the equipment and how well it works. Ordering from any other website we wouldn't have that.
I had one of these for a short time. The laptop itself was actually pretty nice but that button failed on me in only a couple months. Returned the laptop and got a different one. It really is just hot garbage.
@@AgateBrick I avoid HP for these reasons. Never bought an HP computer, though I've fixed many of them. Probably all the fixing is why I'll never buy one.
5:48 there is where I thought about whole broken button. Extruded button on the edge is a real design flaw. Also those models must be turning itself on (in bags or backpacks) pretty frequent.
Love these videos!!! This guy has helped me progress in my abilities to fix different electronics!!! Im into RC airplanes and helicopters and over the past few months I've been able to revive many ESC's, radios and receivers👍 you ROCK and keep the videos coming 👍👍
Hello Sir, am having a problem with my laptop but I will like to first thank you for an awesome videos you do. I am a student of Takoradi Technical University and have my hp envy 360 laptop not switching on. I notice on the board that, there is a burnt ic on it, so please how will I go by the fixing
Hello, am from boston but i have my HP Envy x360 15.6” 15m-ed0013, if i connect the charger it was showing red, then white but when i switch it on, the caps button blinks. I replaced the mother board but its still doing the same thing. What can i do
i got a laptop from my friend not power on but sometimes on and now it not at all power on , i assume that the same problem with that lap top , it been may be 6 , 7 years now , i gonna get it out and check it , thaks for the tip
Good work. You have to improvise very often on such things like this. You have to think easy and sometime think different to get an result. Thats nice but sometimes a bit hard. Great video, thank you. Greets
I have a question: I have an Asus laptop that doesn't turn on with the battery seated but does turn on without it after pressing the power button for 30 seconds. After it turns on once and I place the battery it also turns on with that battery. When I turn the laptop off and try to restart it again, it does nothing and only turns on if I first remove the battery again and hold the power button for so long. The second issue: only the V key on the keyboard doesn't work after replacing the battery with a new one, because we thought it was just a battery issue at first. I subbed and liked, I really like your videos.
Wow that button is badly designed. When you were pressing it the 2 legs that would connect to the pads were taking on some of the force. Seems like it needs more achoring points to the board.
Also could you recommend supplies for beginners. I think i definitely need a microscope but i don't have a lot of money, so i just need something good enough for me to be able to fix a hdmi connector.
i got x360 convertible dh1141tu, charging led is illuminating orange light, when i press power button, power led goes on, but fan not spinning and after 10 second power led goes off, what do you suggest sir ?
HP 14m-ba013dx no amber light, adapter is good. removed battery, replaced dc jack, amber light comes on once for a couple of seconds then off. no power, tried an external monitor no video or power, what can it be? the main board?
Hey boss I have a ps5 that has the fan connector disconnected from the motherboard now my fan isn’t spinning I was wondering if I took it down there would you be able to fix it up
I have white power light only But does not power So far tried reset by power button press Battery disconnected etc Not working Any ideas ? Appreciate your help
Oh dang that's good work what you just replace with wire... Yea gonna replace again with other donor board... one of those days shyt happen sometime lol. But you still doing excellent work Alex... Better than Factory as we speak ...lol. Forward to watch your next new video.. fun fun :)
I have a ps4 that i tried to replace the hdmi connector, of course i ripped a few pads but stopped after that happened. But i think im learning a lot from watching your videos. I've seen you apply solder to the pads without ripping any pads. So could you please explain how to properly do that. I think maybe it's the heat setting. Perhaps i had the heat too high. So what temperature would you recommend for doing that.
Camera Angle is now perfect looking Handsome... You can also get rid of white hairy stuff with black colour. Coz U r youtube celebrity too. Along with Fix Engineer...😁
I have a msi r6850 cyclone edition gpu on load screen goes off like video or games no display can you reply what might be wrong as your any previous experience
i must say that is a really terrible design for a button... something that is likely to get pushed hard or in some cases frustration when turning it off if it froze or such.
Dont you need to solder the second leg? The button needs to complete the circuit to work?
I thought so too.
I assumed the sides are already connecting with the ground pad on the side. I'll confirm this tomorrow. A new board was ordered either way.
I think no need, he just short it from the ground earlier and the laptop is working.
I have also the same question
Yes its possible the other pad is the link to ground. If he re checks it we'll know
I think the best way to get Alex to Notice you at this point is just to park outside his Shop in a Van with the words "FREE DONOR BOARDS" painted on it. Love your vids Alex!
I purchased a few of those laptops for our small business and 2 of the 4 that we purchased suffered button failure. I replaced the button myself.....when I opened the laptop and looked at the design I thought to myself: really? HP? This is a good design? They only kept that button model for less than a year....HP obviously had to replace many of them under warranty. Thanks for another great video.
Alex "saving the world from complaints"😁😁😁
learned alot. Thank you again.
in the first minute I realized I do not have the same issue, but I stayed because you were doing such a good job at explaining everything I wanted to see it through.
Your concise description of fault/option/repair detail, is beyond reproach. It's so good to re-live such moments of 'tronics-repair success.
Satellite Rx repair was my little corner but then eye-specs surface-mount-tech and pension took over. Here's a quiver hand shake and Thanks, to you.
Man, you're such a good teacher I knew every step you'll do just looking at the board state (wouldn't be able to do them, but I got the theory), I'm no technician, I just watch your vids cause I find them relaxing.
I love this man he's smart when he check for the button before checking the whole board and waste time
Also i think i am gonna start ordering supplies from your website. I love how you actually show the equipment and how well it works. Ordering from any other website we wouldn't have that.
I am a technician from philippines. I always view your video. Thanks for sharing new ideas.
Greetings from Greece! Keep up the good work mate ! 💪💪💪
I like your smile when you find fault and solution without hardworking 😁
Thank you for Sharing your experience.
Best regards from Germany.
You are such an inspiration to many. You have really inspired me to love electronics engineering
Damn HP, you put a laptop lifeline on that dinky button
I had one of these for a short time. The laptop itself was actually pretty nice but that button failed on me in only a couple months. Returned the laptop and got a different one. It really is just hot garbage.
@@AgateBrick I avoid HP for these reasons. Never bought an HP computer, though I've fixed many of them.
Probably all the fixing is why I'll never buy one.
Power button was either designed by a new engineer fresh out of college, or the most evil senior.
5:48 there is where I thought about whole broken button. Extruded button on the edge is a real design flaw. Also those models must be turning itself on (in bags or backpacks) pretty frequent.
awesome way of trouble shooting.... i must request you should deliver lectures on basic trouble shooting of mobiles as well
We appreciate your long videos......
With more than two device in it.😄🙏please upload those kind also.
Had de same issue, did know how to make a bridge to test, thanks you you helped me to understand what happend and how to fix it!
I also love your commentary. " what came first the chicken or the egg, Soo many questions" that was way too funny
الله يعطيك الصحة والعافية وراحة البال خيي Alex
Still an awesome job!
Great. Thank you a lot. You saved my laptop and my pocket
I've wanted to ask, do you only use low melt solder to remove the components?
Love these videos!!! This guy has helped me progress in my abilities to fix different electronics!!! Im into RC airplanes and helicopters and over the past few months I've been able to revive many ESC's, radios and receivers👍 you ROCK and keep the videos coming 👍👍
Hello Sir, am having a problem with my laptop but I will like to first thank you for an awesome videos you do. I am a student of Takoradi Technical University and have my hp envy 360 laptop not switching on. I notice on the board that, there is a burnt ic on it, so please how will I go by the fixing
why don't they make a conductive glue/paint that can be soldered onto? then you could just paint on new soldering pads.
What kind of flux remover do you use?
did you get a new camera or lighting setup? the video quality seemed crisper in this video.
Hello, am from boston but i have my HP Envy x360 15.6” 15m-ed0013, if i connect the charger it was showing red, then white but when i switch it on, the caps button blinks. I replaced the mother board but its still doing the same thing. What can i do
Please work on HP Elitebook 725 G3.... Mine has a charging IC fault.. The charge voltage isn't reaching the battery connector
i got a laptop from my friend not power on but sometimes on and now it not at all power on , i assume that the same problem with that lap top , it been may be 6 , 7 years now , i gonna get it out and check it , thaks for the tip
Good work. You have to improvise very often on such things like this. You have to think easy and sometime think different to get an result. Thats nice but sometimes a bit hard. Great video, thank you. Greets
Hi @NorthridgeFix do you use new cam ? to record ?
Nice work good morning all
I think we my need disassembly and reassembly ASMR vids 😁
my hp envy 360 often (9 out of 10 times) shuts off abruptly without any warning. what shall i check please? the battery is good.
As my MSI GT72S-6QD. There is orange light but no power when I push the power button. I don't know what will I do. Thanks for the video.
I have a question: I have an Asus laptop that doesn't turn on with the battery seated but does turn on without it after pressing the power button for 30 seconds. After it turns on once and I place the battery it also turns on with that battery. When I turn the laptop off and try to restart it again, it does nothing and only turns on if I first remove the battery again and hold the power button for so long.
The second issue: only the V key on the keyboard doesn't work after replacing the battery with a new one, because we thought it was just a battery issue at first.
I subbed and liked, I really like your videos.
so, from the previous video, new camera?
Wow that button is badly designed. When you were pressing it the 2 legs that would connect to the pads were taking on some of the force. Seems like it needs more achoring points to the board.
Also could you recommend supplies for beginners. I think i definitely need a microscope but i don't have a lot of money, so i just need something good enough for me to be able to fix a hdmi connector.
i got x360 convertible dh1141tu, charging led is illuminating orange light, when i press power button, power led goes on, but fan not spinning and after 10 second power led goes off, what do you suggest sir ?
HP 14m-ba013dx no amber light, adapter is good. removed battery, replaced dc jack, amber light comes on once for a couple of seconds then off. no power, tried an external monitor no video or power, what can it be? the main board?
Alex, 📎 = quick switch 😂
Judging by the camera's focus abilities, I think it is Sony A6400 or A6600... Wonder if I'm right. :P
Sony a7iv
❤ thank you for your help 😊
hello want aske for mosfet QA3118 in hp probook 450 g6 what is compatible mosfet
Hey boss I have a ps5 that has the fan connector disconnected from the motherboard now my fan isn’t spinning I was wondering if I took it down there would you be able to fix it up
I have white power light only
But does not power
So far tried reset by power button press
Battery disconnected etc
Not working
Any ideas ? Appreciate your help
Oh dang that's good work what you just replace with wire... Yea gonna replace again with other donor board... one of those days shyt happen sometime lol. But you still doing excellent work Alex... Better than Factory as we speak ...lol. Forward to watch your next new video.. fun fun :)
I have a ps4 that i tried to replace the hdmi connector, of course i ripped a few pads but stopped after that happened. But i think im learning a lot from watching your videos. I've seen you apply solder to the pads without ripping any pads. So could you please explain how to properly do that. I think maybe it's the heat setting. Perhaps i had the heat too high. So what temperature would you recommend for doing that.
I have this kind of laptop that is turning on but not charging the battery, pls kindly help out
Camera Angle is now perfect looking Handsome... You can also get rid of white hairy stuff with black colour. Coz U r youtube celebrity too. Along with Fix Engineer...😁
I have a msi r6850 cyclone edition gpu on load screen goes off like video or games no display can you reply what might be wrong as your any previous experience
great work
Don't blame the camera for focusing on your eyes. lol
Computers have mother boards and daughter boards. Why not Father and Son?
Thanks!
i must say that is a really terrible design for a button... something that is likely to get pushed hard or in some cases frustration when turning it off if it froze or such.
This guy makes me laugh, "Let me just cover the users name, so we can save the world from complaints" :D
I think when the laptop wasn't turn on the user pressed the button so hard aggressively. 😅
Alex you're amazing ♡
oh You charged Thermal camera, nice :D
What a horrible design by HP. Trace width < 0.1 mm for a switch? There's so much space for a thicker trace! How stupid is that?!
Hello Alex
this power button is similar to smart phone power button
I have hp omen 2015 and 3 days ago its special ssd by intel optane is dead and now i am 😑 Idk why oem sucks 😡
Well SSD lifetime is because of its read/write cycle especially for small ram and small SSD size. 7 years is long enough for that era's ssd
@@trym2121 bro i bought the laptop 2 years ago 😑
hi alex! :D
Big boss....
nice Vedio ☮️👍
Awesome ✌🏻✌🏻✌🏻
👍🏾
What a weak design :-(
A diddly power button causing everyone to slide nto the slough of despond. Bah! Feed it to tarantuals!
Wow
الارضي 🙁
hi
big bosss
🙏👏👏👏🙏
👍🏻🇮🇳
🧭BIG BOSS SPECIAL is comming soon!
Thanks!