From Mcarbo when I asked how many pounds this new spring was. Their reply: Good morning I have spoken with our engineers, It is sitting at 12lbs. From the OEM ones we have seen in house, they are sitting roughly 10lbs. Since springs have a tolerance, im sure some people are getting them just below or just above that. Kenneth Noble M*CARBO
LCP1 380 FTF common? So many claim 0 malf's yet my 1st 50 rds almost all FTF. Better after polished F Ramp. Extractor is stiff. FTRB rarely. Worried about FTE with new spring.
@@Vlad_MCarbo 🙏 LCP1 380 FTF common? So many claim 0 malf's yet my 1st 50 rds almost all FTF. Better after polished F Ramp. Extractor is stiff. FTRB rarely. Worried about FTE with new spring.
I wouldn't feed it a regular diet of +P but for concealed carry it's fine, I ran 5 boxes of Underwood Xtreme Defender +P through my LCP2 to check for reliability first & it ran flawless.
I have thousands of rounds through my lcp2. No issues so far. Don't start replacing parts if you don't have a problem. If you do have a problem it could be a limp wrist
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
It's MCARBO. They make guns better
Thanks guys! Just ordered the pin spring and steel rod!!!
Thank you mcarbo for the awesome video.
Great info. I just ordered those parts. Nice upgrades
From Mcarbo when I asked how many pounds this new spring was. Their reply:
Good morning
I have spoken with our engineers, It is sitting at 12lbs. From the OEM ones we have seen in house, they are sitting roughly 10lbs. Since springs have a tolerance, im sure some people are getting them just below or just above that.
Kenneth Noble
M*CARBO
Will be getting a hold of you to purchase that kit. Looks fantastic
Hmmm...looks like I'll be ordering me one of those for my LCP II
Purchased! Thanks 👍
Only upgrade that's missing now is spare firing pins for Ruger products.
Great video
Galloway has a 13lb spring.
The 13lb. spring is only for the .380 variants, though.
LCP1 380 FTF common? So many claim 0 malf's yet my 1st 50 rds almost all FTF. Better after polished F Ramp. Extractor is stiff. FTRB rarely. Worried about FTE with new spring.
So the install is on the max but on the lcp 2 .22 is the recoil spring similar with an internal spring?
@@Vlad_MCarbo 🙏 LCP1 380 FTF common? So many claim 0 malf's yet my 1st 50 rds almost all FTF. Better after polished F Ramp. Extractor is stiff. FTRB rarely. Worried about FTE with new spring.
Do you guys have any Keltec P3AT trigger upgrades sitting around by chance?
So +P should be alright???
Yes!
The owners manual says do not use +p. Barrel is too thin for higher pressures
I wouldn't feed it a regular diet of +P but for concealed carry it's fine, I ran 5 boxes of Underwood Xtreme Defender +P through my LCP2 to check for reliability first & it ran flawless.
Nothing new for the lc9/lc380?
I tried the 12 lb spring on my lpc max and was getting a few light primer strikes per mag so I had to remove the kit unfortunately
I have thousands of rounds through my lcp2. No issues so far. Don't start replacing parts if you don't have a problem. If you do have a problem it could be a limp wrist
So no longer a Lite Rack.
It’s the 13 pounds??