Garbage Segregation System Project. This project is about Segregation of Garbage based on weather the Garbage is Wet, Dry or Metallic. For the Code mail me at tousif@migitinstruments.com.
I actually designed the whole conveyor by myself. And I did it during lockdown, I didn't had much resources at that time, I used whatever was available at home like plywood pieces, some Aluminium angles some channels etc, dint even had a ply that was long enough for the conveyor so I had to fabricate two pieces of ply in other to get the proper length. I already had the motors and the mounts. So I cannot exactly say how much spent on it. But the cost depends upon your design, mine is a raw design this ll cost around 3ki guess. If you want a proper functioning then it ll cost maybe 10-15k or so, again depends upon your design, the weight you are gonna put in it, speed, material you are going to use etc.
I did it during lockdown for a batch of engineering students. I had very little resources since everything was closed, i had to use whatever was available at that tune, you xan see that even the ply board i have joined to boards to achieve the required length. I guess it costed me around 12k - 13k at that time. And i had charged 20k from the students, that included an internship training program as well. This setup can be made much better if we spend some more amount say around 20k we can make a little better and smooth system than this. But you have to remember I did fabricated this whole going by myself, and if you can do it then you might save save some good bucks.
I'll try. Just detecting is not that big deal, but if you are going with conveyor belt and all, then it's going too be a little tricky. Share me your mail id I'll get back to you ASAP.
tousif@migitinstruments.com. after mailing do mention about it in the comment section. I am having some issues in receiving mails so in case if I dont receive the mail then I ll reconfigure the server.
great work Rocky 💪🏻
Thanks Mate
For the code mail @ "tousifiqbal.mig@gmail.com "
very good
keep it up
@@user-kp1ol5dc2u Thank you very much
Nice work sir, can you share the circuit diagram and arduino codes sir?
Please send arduino code and circuit diagram
How and when do I connect it with the code?
@@astridgultom8341 The code is stored in the microcontroller so as soon as you start the power supply the code begins
Do you have research papers for this?
No. I don't have a research paper. I just made it .
Can you please tell the circuit diagram
Send me your mail id
Hii
Did u receive the circuit diagram???
What would be the cost for just conveyer belt
I actually designed the whole conveyor by myself. And I did it during lockdown, I didn't had much resources at that time, I used whatever was available at home like plywood pieces, some Aluminium angles some channels etc, dint even had a ply that was long enough for the conveyor so I had to fabricate two pieces of ply in other to get the proper length. I already had the motors and the mounts. So I cannot exactly say how much spent on it. But the cost depends upon your design, mine is a raw design this ll cost around 3ki guess. If you want a proper functioning then it ll cost maybe 10-15k or so, again depends upon your design, the weight you are gonna put in it, speed, material you are going to use etc.
Can you share the circuit diagram and pin connectio
Mail me at tousif@migitinstruments.com ll share code
Nice work bro can you share the aurdino code
Heii. Great gob i can u plsa share the code file and circuit
Mail me
Yo, do you have a homepage? Just curious.
No Bro not yet. Trying to work on it. Maybe ll come with one in sometime.
nice job! can you share me the code and circuit diagram
Mail me
Bro how can i contact with for asking for code and circuit?
mail me at tousifiqbal.mig@gmail.com
@@migitinstrumentsok i already email to you
yo, bro can u share the codes for this?
Share your mail id
Can u provide the Arduino codes please
Mail me or share your email id.
can you share the code, please?
Share your mail id
@@migitinstruments
@@shahdismail9274 tousif@migitinstruments.com
Nice Work can you please share the Arduino codes?
Thanks. Mail me at tousif@migitinstruments.com or share your mail id.
Can you provide Arduino codes please
give me your mail id
bro can u plazz tell me the tottal cost of this work?
I did it during lockdown for a batch of engineering students. I had very little resources since everything was closed, i had to use whatever was available at that tune, you xan see that even the ply board i have joined to boards to achieve the required length. I guess it costed me around 12k - 13k at that time. And i had charged 20k from the students, that included an internship training program as well. This setup can be made much better if we spend some more amount say around 20k we can make a little better and smooth system than this. But you have to remember I did fabricated this whole going by myself, and if you can do it then you might save save some good bucks.
Btw am from India and the amount is in Indian Rupees.
sir can u share ur code?pleaseee
Mail me
Is this project also implemented using raspberry pi?
No I have used Arduino in Project. Although we can use Pi
Can you help in the code to implement the same project using raspberry pi 3B+ (only metallic waste detection through inductive proximity sensor)
I'll try. Just detecting is not that big deal, but if you are going with conveyor belt and all, then it's going too be a little tricky. Share me your mail id I'll get back to you ASAP.
I have tried commenting my email id but it isn't visible I guess
@@sye7969 okay then send me a mail on tousif@migitinstruments.com
total cost?
It depends upon the components you use and the design. I charged 20k for making this project.
Can you pls make it in 15k if possible?
@@mdzeeshanali5179 mail me @ tousif@migitinstruments.com
i need ur email bro
tousif@migitinstruments.com. after mailing do mention about it in the comment section. I am having some issues in receiving mails so in case if I dont receive the mail then I ll reconfigure the server.
Can u provide the Arduino codes please
Send me your mail id