Making A Knife From Cy Swan's Twist Damascus Billet!
HTML-код
- Опубликовано: 2 апр 2018
- LIKE SHARE SUBSCRIBE!
Everything wants to be a knife but especially this billet of 1095 and 15n20 steel made by Cy Swan. Let's give it an Oprah style makeover and see what happens! I use beautiful Macassar Ebony wood for the first time, which I will refer to as James T Kirkwood for its predilection to warp all over the galaxy. Live and Learn!
Thanks to Holden Murphy and Jonathan Estep!
CY SWAN: greenvalleyforge.com/
100% Charity Auction at for this knife: www.ebay.com/itm/302692989156
Support this Channel! / greenbeetle
Inquiries: stephen@greenbeetlegear.com
This videos content is copyrighted and may not be reused, published or distributed without my express, written permission. Спорт
St Jude Children's Hospital Charity Auction for this knife: www.ebay.com/itm/302692989156
CY SWAN: greenvalleyforge.com/
i actually love that your knives don’t come perfect. when i see makers create perfect knives, it saps my motivation. thanks for posting!! love the channel.
A trick I've found for warped wood handle scales is to wet them with water and clamp it onto the knife handle with enough pressure to make them flush and then let them sit out in the sunlight for about 20 min. Do this 2 or 3 times and wahala they're perfectly flush with the tang.
That is a beautiful knife buddy and an awesome job you did. I much prefer the low layer Damascus it has such a better look to it. Thanks for sharing 👍🏼👍🏼👍🏼
Steve, any maker will tell ya, "There is no such thing as perfect" And while they may be technically right, they are forgetting one thing: Imperfections give character. Imperfections make things unique. Imperfections make things perfect for the ones who absolutely fall in love with them. and damn if that knife ain't damn near perfect. (I like it, don't love it yet, because sadly, I couldn't afford it.)
en.wikipedia.org/wiki/Wabi-sabi
"No mistakes, just happy accidents." -Bob Ross
Very cool.
Your touch when making a knife just adds character to it!
This knife is by far the most beautiful thing (to my eye) that you have ever done! I wish I could afford it! I would buy it in a heartbeat! Wow.... the pattern is perfect, the profile is perfect.... I'm so in love with it!!!
That is one incredible damascus pattern....very beautiful.
And I really liked the recessed sides, it made the wood pop in a very eye pleasing way, never seen that before and I bet it will make the feel of the knife even better when working with it in the kitchen.
That is the sharpest cut through news print with no drag that I've ever seen.! I saw some other of your bideos in the past. Very nice explanation along with showing what you are doing so that I appreciate your hand-made knife when done by knowing pretty much each step that went in to making it. That twist Damascus material by Cy is some serious stuff. AF
awesome! i love watching cy and scott, so cool you guys all got together for this ;)
Another awesome project. It's always a good day when you post a video, dude. Inspirational stuff.
Really enjoy videos. Always learn something and for that I am very greatful.
really nice clean good knife without any weirdness added,looks very functional a working piece of art.
Love Scott’s channel! Great stuff!👊 keep up they great work brother!😊
Steve, you deserve to be making more than any of these fad RUclipsrs like *cough cough* Ninja (a video game streamer making $300,000 per month) because you manage your own account and bust your a$$ on your product and provide an educational and satisfying product. Thanks for all you do man. I wish i had the money to support you on patreon. Sincerely, me. (An 18 year old college student with common sense)
For your wood scales you should try some OB shine juice. Wood turners use it. (boiled linseed oil, clear shellac, denatured alcohol ) Mix in equal parts. Make small batches, because the alcohol likes to evaporate. Protects the wood and can be polished. I've had good results with it.
YAAAAAY YOU'RE BACK!!!!
Gorgeous knife. Wonderfully done.
To me, it was perfect! Beautiful and perfect, lots of character and probably would not use it in my kitchen, it would go into a sealed frame and on a wall in my kitchen. What a beauty! 👍👍👍
love the video, love the attitude you have to complications and your momentum while making. As a studying guitar maker, if the wood isn't dry, nothings gonna make it stable but time or a kiln drying process. you did your best with what you had and the result is spectacular!
That's one heck of a knife. Keep up the good work!
Love the loveless fasteners. What a gorgeous knife. Everyone bid if you can.
"embiggen it a sklootch". God I love technical blacksmithing terms! Nice job!
Beautiful knife! Really. Even with any flaws.
Beautiful. Damn beautiful
Absolutely beautiful.
Great video as always, this is awesome!!!
Loved it!!
any day that has a new greenbeetle vid uploaded is a good day
Beautiful work! I wish I could afford even a small blade from you but I'll keep saving. :) Keep it up!
What a gosh dang beautiful knife.
Nice work man I enjoy the commentary.
Man, that's gorgeous!
That's a good looking knife!
Beautiful!
Beautiful knife, would love to have it in my kitchen.
Nice job by all,,,,great lookin' blade.
Great looking knife! To get a shiny oil finish you want to apply quite wet, then buff off after it sits for a few minutes, and repeat for 5+ coats depending on your oil.
Keep up the funny videos!
What a beautiful knife! Well done, overcoming those little hiccups, GB.
Incredible
That`s one good looking knife :)
Nice video.... Thanks
Great vid!
"Embiggen it's dimensional width a sclooch" lol I love it
beautiful knife
I love when my subscriptions come together :')
I like the jokes and funny editing.
Tru oil needs several coats, with 1/2 mineral oil dilution, and wet sanding in between coats to fill the pores of the wood if you want a polished finish. Hope this helps you in the future. This is a beautiful knife
very cool
Bravo !:-) 👍
issa beautiful knife
Impressive
I'm digging all the Monty Python references in your videos
I wanted to sleep at midnight and now it's 2am and I'm watching this video
Beautiful knife, stupid sharp!
Some people who do fine work, like low quantitiy high quality woodwork and such put a lot of time into building a store of wood and organising it so that when they get a piece to use it's had time to season/stabilise. Another way is to use a kiln to dry the wood out first. I have no idea what temps or timings they would be.
Hey Steve,
I'm fairly new to knife making, working on knives 32 and 33 today, and I'm still using a coal forge. I've been collecting parts for my gas forge and would love to know where I could read more on the burner you mentioned about 40 seconds into your video.
I'm enjoying your videos. Thanks for making them.
Ben
I use tru oil as a finish on all of the bows that I make. You have to do about 10, very thin layers. Do three layers, about 3-4 hours apart, then let it cure for 24-48 hours. Go over it with high grit sand paper or 0000 steel wool, I prefer steel wool. Then repeat the process until you're at the 9 layer point. Go over it one more time with sand paper or steel wool, then do a sort of French polish for the 10th layer.
Or, you could do the 10th layer, let it cure for a day or two, then go over it with a rottenstone of pumice mixed with oil.
Hey Steve,
you shouldn't glue the scales to the tang while they still have moisture in them because as soon as the wood dries it will crack the glue bond and then you have ugly gaps. The best way to get rid of movement in natural wood is to dry it very well. So you should keep your wood in a dry place, like a living room for 1-2 weeks (or longer) before using it. It is also helpful to further dry it by putting it in the kitchen for about two hours at around 60*C. These methods have worked for me and I hope they might help you.
hes 3122 nice man, thanks for the help!
Long time no see Mr. Beetle!
Well there you are, mister "Green Beetle"...if that is your real name. Nice of you to finally show up again.
You make great stuff, both blades and videos. I will definitely pitch in some cash on Patreon if I can get myself caught up as well. Trouble is, I'm also a creator...and not as successful as you. Good luck to us both.
Ty Grenier it’s a tough gig, good luck to us all!
Good video. You're pretty funny :)
Excellent!!! Don't worry about the small tid bits bro?? Over all she's a beauty!! Love the wood work.. love it all and I'd be happy to keep er on ma hip!!! Keep up the gr8 work!
Tremendous man! Looks great!!! Any movement on the forge? I hope soon.
Hello Steve!
Hello Stefano!
Steve is it just a trick of the video or do you find grinding on your machine slows the belt speed down more than it should? If so I had that issue once and it was because I didn’t have enough tension on the belt.
Haha.. "The Quest of the Holy Grail" ;)
sweet ribbon burner
I fucking love this guy 🤣
I miss my beloved city Damascus
Steve!
hey i have a question i bought a knife that is made out of chinese mystery steel also its a fliper edc so my question is could u make the blade out of 5160 or 52100 steel
Man, I would love to do an integral blade one day, but seeing i do stock removal(I don't even have an anvil, though I might try to build one soon), I would be wasting a lot of material just grinding it(or cutting it) away.... Have you ever used steel wool while you are etching, to make sure everything etches evenly? I always dip my blade, then wipe it down with steel wool, then dip it again to make sure everything is covered evenly.... The knife looks sweet by the way...Take it easy...
Dave Erving Evader Knives interesting. I’ve cleaned up oxides after etch w steel wool but not during. Will try that, thanks, brother!
I fucking love chunky patterned damascus
Surprised that the ironwood moved, I’ve never had a problem with it and I’d be surprised if it would even take stabilizing resin, it’s so naturally oily already. Unfortunate you had to expose the tang like that. It’s a fun aesthetic but also a great way to ensure nobody wants to use your knife. Instant blisters!
Did you do the coffee trick to the Damascus?
Ok, the trick with true oil, apply a generous coat and wait till tacky wipe back with 2000 grit. Apply a second coat and repeat till you like it. You can also buff the he'll out out out it with coarse paper when tacky or take some jewler's rouge to it after it's cured, buffing with paper after it settles is futile
nice I'll try it.
by what did you keep the billet during grinding on 4:05?
How strong is that magnet? I ask because I don’t trust the ones at Lowe’s. If you can recommend yours please share it with me. 👍
Is your intro inspired by Austin from Game Theorists? Because that's exactly how he introduces himself.
The moisture % must of been pretty high if a piece of wood that small was warping so much. Usually even 12-16 % is okay when I'm turning bowls on the lathe
You think it's possible to forge weld titanium to carbon steel with a thin piece of vanadium in between?
I know nothing about pure vanadium but titanium is difficult to forge weld. I think it's typically blast welded to steel if I rem right.
I think there is a reason you only see a few guys that make timascus(or radmascus)... If you check out Rad Knives or alpha knife supply, they are the only guys I know successfully making anything that involves titanium being forge welded.....Even Alec Steele hasn't tried it, hahaha
Looks like Roadhouse’s steak knifes, I would definitely pay $12 for one!
i fully finished my first hand made knife today, its got a convex edge on it for bushcraft and all that. my questions is, i got it to shave hair but very rough, any tips? i used a 3500 grit stone to finish and stropped it on leather.
i wonder about the grain size and carbides
@@GreenBeetle it's an old mill saw blade, not sure what kind of steel
Steve did you like working with the massacar ebony
its hard, drilled and sanded well. i didn't get quite where I was aiming with the finish but it's got lots of character.
Damascus knives are best I Luv them knives me and my grandpa and my brother makes axes and knives or maybe swords if my grandpa is not in a cranky mood my grandpa does the Forget my brother catch up clean up all that kind of stuff I do with Engraving and the handle work
Those Klingspor belts doh...
I don't speak american or english, but what's the powder that you use to forged? Thanks
Its called flux or borax
Gimme Pls Mister!!!!
I want to buy one of your knifes how do I get one???
So what's the reasoning behind etching for 5-7 mins then sanding and repeat x3?
removes the oxides that form during etching exposing fresh steel for etchant to act on, exaggerating the pattern.
Is the camera making it look like you're forging too cold?
Seems you are having recurring issues of not enough steel to work with. You could forge much thinner and grind less and you will hold on to more steel overall.
What kind of oil you use for wood handle?
True Oil
Those look like contour lines on a map
"Oh a green beetle video, what's gonna screw him over this time?" So I guess handle scales today?
Did the Wood Warp Because it Wasn’t Completely Dried Yet?
Embiggen the dimensional widthisuch
6:48 :o
Ebony likes to warp
Do you know if you can dry ebony in an oven to stabilize it or do you need resin? Whats best approach?
Green Beetle that I do not know I was told a while back by a friend of mine that it likes to warp and he did not say much more
You should put that wood in microwave oven , to dry out , check information about this ...