Half way through the process of putting mine back together, big spring is no where to be found and missing 1 bullbearing, have taken out the ignition barrel and now it won’t go back in but it’s all ready to go 🙈
My 07 terri sy wouldnt crank when in town (ing lights on) Swapped fuses relays and found bridging start relay would crank and run. Drove home and found wiggling key in start would start it, but then key lost detents an a ball bearing fell on my foot.... looks like will have to rebuild as per this video. One other fault before total fail was fan aircon stopped working and radio turned off but I could turn on. Thanks for this video, quicker than opening workshop manual.
Man...how hard is it to remove push those hoising pins out and then get them back in again. If i had've known this first i wouldnt have attempted it lol
Great video young fella! Could you recomend anyone in Darwin to do this job for me? The copper plate and stuff just fell on the floor of my ute. Cheers
This is not the same tool i recieved nor did the insttuctions match the tool i recieved & as theres not a sufficent flat spot on the coated alloy housing whos the genius that forgot this shit slides every fkn where
Just did mine, in all of about 30 minutes. The removal tool is an engineering masterpiece, unlike Ford and Bosch's disgusting engineering of this switch. Definitely be sure to have nice long pin punches on hand, otherwise it will be a painful task. The rest is easy if you follow the instructions closely and take your time with it. Screw Ford for poor quality components. Makes me glad they shut down the Adelaide factory.
What a stuff up Ford made to make what should be a simple job hard for the home mrchanic...give me an old falcon any day...taking out the barrel from the dash is a 5 minute job..BA and BF Falcons are such shitboxes ill never buy another one !!!
Done it! Took just over an hour. Quite a fiddly job. So glad it's done.
That is an excellent instruction video as well as visuals of the procedure. We were successful due to this video
True to my usual form, a simple repair became a hassle when I lost one of the ball bearings.
Half way through the process of putting mine back together, big spring is no where to be found and missing 1 bullbearing, have taken out the ignition barrel and now it won’t go back in but it’s all ready to go 🙈
Really good video,no bs to sit through
Very helpful and professional video! Not sure about the Collingwood hat though 😆
Excellent Instruction!
Excellent video. Thanks!
Where do we get the ignition switch removal tool from?
My 07 terri sy wouldnt crank when in town (ing lights on) Swapped fuses relays and found bridging start relay would crank and run. Drove home and found wiggling key in start would start it, but then key lost detents an a ball bearing fell on my foot.... looks like will have to rebuild as per this video.
One other fault before total fail was fan aircon stopped working and radio turned off but I could turn on.
Thanks for this video, quicker than opening workshop manual.
Man...how hard is it to remove push those hoising pins out and then get them back in again. If i had've known this first i wouldnt have attempted it lol
Great video! Thanks for sharing! Any links where to find the switch extractor and the new switch parts? Thank you!!!
Just finished doing my SY territory ignition. A little fiddly but quite easy.
Just wondering where you can get the new housing from. I'm in nsw, thanks
Exceptional vid mate kept simple and clean very professional thank you for sharing this knowledge
True to my usual form, a simple repair became a hassle when I lost one of the ball bearings.
Thx. Very good
Oh for the want of two allen screws instead of the pins...
Where can you buy the kit from and what is it called?
www.fordignitionswitch.com.au
Great video young fella! Could you recomend anyone in Darwin to do this job for me? The copper plate and stuff just fell on the floor of my ute. Cheers
Same
same, nothing broken, just fell apart. Lost a ball bearing somewhere. Small thing, major hassle. Keep a magnet handy.
Anny help where can i find buy the removal tool?
When you find out let me know please lol
I found the ignition didn't click into on and acc like the original. key now feels like turning porridge . very expensive for what you get
Then you did something wrong. I just did mine today and it feels solid.
I've tried to call to purchase phone is never answered are you guys still in business?
I'm not getting any response from Kev either, have they gone out of business
@@wc142 must of which is unfortunate can't find anymore DIY places to sell them
@@wc142 must of which is unfortunate can't find anymore DIY places to sell them
I just buy a spare whole wheel assembly with keys put in get coded $50
If it was designed properly from in the first place wouldn’t have to do this shit
This is not the same tool i recieved nor did the insttuctions match the tool i recieved & as theres not a sufficent flat spot on the coated alloy housing whos the genius that forgot this shit slides every fkn where
Just did mine, in all of about 30 minutes. The removal tool is an engineering masterpiece, unlike Ford and Bosch's disgusting engineering of this switch.
Definitely be sure to have nice long pin punches on hand, otherwise it will be a painful task. The rest is easy if you follow the instructions closely and take your time with it.
Screw Ford for poor quality components. Makes me glad they shut down the Adelaide factory.
What a stuff up Ford made to make what should be a simple job hard for the home mrchanic...give me an old falcon any day...taking out the barrel from the dash is a 5 minute job..BA and BF Falcons are such shitboxes ill never buy another one !!!