It is a struggle to post videos consistently and come up with new ideas all of the time. You know better than me but I can really relate with what you said at the end there. Keep it up man.
Hey Colt good to hear from ya! I put a SPE manifold and piping kit on my 2019 it has the air censor bung in the cold air side down low on the pipe so it's out of sight. Just some information.
The yard is looking sweet, man. As far as the intercooler, my truck threw the same code with a Mishimoto intercooler. Luckily, all I had to do was add more coolant to the secondary system. It's never thrown a code since. The truck also had the same timing of the code showing up. Clear the code, drive the truck for several days, and the code reappears. I am running SPE piping with the bung in the cool charging pipe. Sorry to hear you had an issue and had to go to so much expense and work. Hang in there and have an other latte' :)
When i ordered my maryland diesel piping kit, I made sure they welded the bung to the cold side pipe. They mount it down low so you dont see the wire and sensor making for a clean setup. When my intercooler craps out, im going with the mishimoto one.
How do you like those tires I’m looking at getting a set for my 19 f350 Dually they make a 35 that is narrow enough that I don’t need wheel spacers but I haven’t seen anything on how they hold up on the heavier trucks
Man can't tell you how many times ill tell myself.. i'll just make youtube video of whatever project i'm working on.. and do i ever do it? no because its a big pain in the ass lol having said that me like alot of other ppl on here like your videos soo keep it up.. l if you so kindly would lol
Hey, Are you running a switch on the fly? If so is it a FT or CAC file? Or Did you by chance swap to or from a CAC SOTF or FT SOTF file? I know I had mine do some weird stuff either running a single file and accidentally leaving the FT unplugged or vice versa Basically I figured since your CAC connection is unplugged (bc you can’t install it) If you ran a CAC sotf file I would think it would go away? I know on the FT sotf file if the sensor is unplugged it will run “i believe”the highest hp setting. But shouldn’t throw a code? Hope this helps may point you in a direction since the code came randomly started.
BRUH!! I absolutely love the hell outta you!! I feel like I should’ve drove to your house during this day drinking melt down with a packed cooler!! 😂 You sound like me on a Thursday raising hell about that hard a$$ work week!! Love Ya Mean It!! 🍻🍻🍻🦅🦅🦅🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸💪💪💪💪💪💪💪
Yeah Colt we need more videos from you for sure! I almost forgot you were here😂 As for the air sensor, just drill a hole and (JB)weld a bung to thread it into pipe. Idk I guess changing a tune real quick is easier than doing all that. What happened to the IDI? I didn't hear what was wrong(if you said it I missed it), just that it was being fixed by a 'real' mechanic. And you gotta fix the back light wires\harness too. Anyways, happy hunting & hope we see you back around soon! 👍🏻👌🏻🤔🛠️🔧🇺🇲
Good shit brother. Nice little update video. Definitely can see how vlogging could take all the fun out of things. I am always telling myself how I would love to do videos on working on shit like you do. But, with having to film everything and then the whole editing shit...lol. Definitely appreciate getting a notification that you have put out some more classic gold for me to enjoy. Keep on keeping on ya dick!
It is a struggle to post videos consistently and come up with new ideas all of the time. You know better than me but I can really relate with what you said at the end there. Keep it up man.
Glad my man Clyde’s back in action!
Always! 🇺🇸🦅🇺🇸
You may want to look at the Mishimoto aftermarket kit, bolts right in no line cutting, 20 percent higher flow. Does use bigger hot and cold pipes
It would be cool to see you getting your first turkey!
What HP tune did you change to? Do u recommend just ordering the SOTF package with switch? I really don’t wanna deal with it
Holy shit i love ur uploads .you are simply a great man and i wish more people were like you ! Keep it up .
@coltsway my no limit kit came with the bung! Cheers brother! 🦅🦅
Hey Colt good to hear from ya!
I put a SPE manifold and piping kit on my 2019 it has the air censor bung in the cold air side down low on the pipe so it's out of sight. Just some information.
hells yeah always good to see a new vid no matter what it is
I feel you. I gotta sit there and get myself hyped up just to film a video. Makes the fixing stuff process twice as long. Beaks up son !
We always down to hear whatever you want to ramble about bro. Thanks for the laughs.
The yard is looking sweet, man. As far as the intercooler, my truck threw the same code with a Mishimoto intercooler. Luckily, all I had to do was add more coolant to the secondary system. It's never thrown a code since. The truck also had the same timing of the code showing up. Clear the code, drive the truck for several days, and the code reappears. I am running SPE piping with the bung in the cool charging pipe. Sorry to hear you had an issue and had to go to so much expense and work. Hang in there and have an other latte' :)
Thanks for the feed back. I was wondering if something had happened to the new one.
When i ordered my maryland diesel piping kit, I made sure they welded the bung to the cold side pipe. They mount it down low so you dont see the wire and sensor making for a clean setup. When my intercooler craps out, im going with the mishimoto one.
Always enjoy your videos make them life gives you time.
Glad you're doing good Colt! keep the posts coming!
How do you like those tires I’m looking at getting a set for my 19 f350 Dually they make a 35 that is narrow enough that I don’t need wheel spacers but I haven’t seen anything on how they hold up on the heavier trucks
Got that brown thumb right away. Love some BH...My Boy!! Keep it going man! Pinkies up!
I don't get it. What does it mean? I assume it's not the opposite of green thumb and that is all I can find online
Colt I need the Info on where you got the truck cap window decal. Can’t find it anywhere.
Looking good brother
Damm good person.just the way I want hear a video. Just straight up honest
Appreciate it brother! 🇺🇸🦅🇺🇸
Where did you buy your ez lynk? I have a 2017 f250 and have been binge watching your videos for the last 2 weeks
What’s that M4 ceiling mount ?
I got a link to it on the video. But here’s a walk through of it! 🇺🇸🦅🇺🇸
Best Truck Gun Mounts
ruclips.net/video/yusmSgNwmfA/видео.html
Do you know if Proven Diesel can tune 2022 Super Duties? I checked their website and it only goes to 2021 model years.
From what I’ve seen and heard, yes they can. Prob a 2021 ECM swap though
What tune file you running? I got proven as well
Man can't tell you how many times ill tell myself.. i'll just make youtube video of whatever project i'm working on.. and do i ever do it? no because its a big pain in the ass lol having said that me like alot of other ppl on here like your videos soo keep it up.. l if you so kindly would lol
Who is the best company to order delete kit for ford 2019 f250?
Why not drill the pipe, put a bung in and put the sensor back?
Hey, Are you running a switch on the fly? If so is it a FT or CAC file?
Or Did you by chance swap to or from a CAC SOTF or FT SOTF file?
I know I had mine do some weird stuff either running a single file and accidentally leaving the FT unplugged or vice versa
Basically I figured since your CAC connection is unplugged
(bc you can’t install it)
If you ran a CAC sotf file I would think it would go away?
I know on the FT sotf file
if the sensor is unplugged it will run “i believe”the highest hp setting. But shouldn’t throw a code? Hope this helps may point you in a direction since the code came randomly started.
"Nerd" lmao i love that shit
BRUH!! I absolutely love the hell outta you!! I feel like I should’ve drove to your house during this day drinking melt down with a packed cooler!! 😂 You sound like me on a Thursday raising hell about that hard a$$ work week!! Love Ya Mean It!! 🍻🍻🍻🦅🦅🦅🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸💪💪💪💪💪💪💪
Good luck on getting your 1st gobbler, make sure you wash that thumb before you go on the hunt
Yeah Colt we need more videos from you for sure! I almost forgot you were here😂 As for the air sensor, just drill a hole and (JB)weld a bung to thread it into pipe. Idk I guess changing a tune real quick is easier than doing all that. What happened to the IDI? I didn't hear what was wrong(if you said it I missed it), just that it was being fixed by a 'real' mechanic. And you gotta fix the back light wires\harness too. Anyways, happy hunting & hope we see you back around soon! 👍🏻👌🏻🤔🛠️🔧🇺🇲
More 6.7!!!
Good shit brother. Nice little update video. Definitely can see how vlogging could take all the fun out of things. I am always telling myself how I would love to do videos on working on shit like you do. But, with having to film everything and then the whole editing shit...lol. Definitely appreciate getting a notification that you have put out some more classic gold for me to enjoy. Keep on keeping on ya dick!
More content pls. Reminder: You'll get pink eye if you kept that thumb out your brown eye. :) Beaks up!!
My intercooler went out on my '16 6.7 around 170k.
Brown thumb!!!! 😂 😳
Where is the turkey video?
Great back yard plenty of room. Thanks
Caleb Willliams Case lmao
Glad someone finally got it….🇺🇸🦅🇺🇸
One in the pink, two in the stink. Got that brown thumb.
Where you been son ridin for Biden or something