Newbie blinger here and I love the products that I have purchased from your shop! Every gift I make, I want to keep because the colors are beautiful. Thanks for sharing your knowledge and love of the bling.
hey girl! not sure if you know this but e6000 is toxic wet or dry! I wouldn't use e6000 to rhinestone anything that liquid or food will be touting. Also! you should epoxy single walled plastic cups as the toxins will escape into the drink though the plastic. awesome cup though!
Inspired to try these, I bought some cups but they are for hot or cold drinnks, would you advise that they only be used with cold drinks? Will it affect the glue if hot drinks are in the cup do you know?
These particular cups sweat on the outside, does this affect the finished product? I have bought tons of rhinestones from your shop, but I have been reluctant to try them on a project that this due to the condensation. Any advice on this?
This is super beautiful and I would love to try one of these I’m just wondering what are the care instructions on this if you wash it was soap and water will the rhinestones fall off. And what about bright tone could you put bright tone over it if you wanted to thank you
Thank you for the video, such a beautiful color combo 😍. I was wondering if you had to sand down the grooves on the sides of the lid to get the rhinestones to lay flat? Or did you just use rhinestones that fit between the little grooves? ( if so were the little grooves noticeable after?) Sorry for all the questions, a huge thank you in advance 💗💗
I hope this is not a silly question but is this cup still able to get the lid on with the pearls and rhinestones so close to the edge? Or did you try the lid on before you began? I think this is absolutely beautiful and I know my sister would love these.
Hi, yes the lid still goes on fine, but I would recommend not putting the larger pearls at the top. Also you can check as you are starting to work on the top to make sure you are able to securely put the lid on.
Blingee Thingee thank you so much. I ordered sOme of your pearl and rhinestone mixes a while back and now I know what I will do with the ones I had left over from my last project. Thank you for taking time to answer my question. Much appreciated.
No you don't want to epoxy over it, it will dull the sparkle on the stones. Use a NON TOXIC perm glue for a drinking cup. Gem tac has worked really well for me and a few others
Hey Christy it’s Michael Jeanettes son! :) loved this video! I wanna have you stone a phone case for me! I can hear Jon watching TV in the background :)
Hi Michael!!! Yep, I feel like every video I do John has always got the tv blasting in the background:) Hope you are doing well. I'm not making custom cases right now, but if there is a particular rhinestone you like in my shop , I'd be more than happy to send you some stones and a tool to help you pick up the rhinestones and the glue if you wanna try to DIY a case. I've still got the same mobile number. Just shoot me a text.
Cups like this on a sturdier cup go anywhere from $70 to $200. My husband bought me one on etsy for my birthday during the summer and I think it was $185. It was really beautiful completely covered in rhinestones and 3D gems.
Newbie blinger here and I love the products that I have purchased from your shop! Every gift I make, I want to keep because the colors are beautiful. Thanks for sharing your knowledge and love of the bling.
I love your mixes! I was referred to you and ordered and I was so happy!
Glad you like them! Thank you so much for shopping with me.
I absolutely LOVE your mixes, rhinestones, pearls! I was referred to your shop and I can’t wait to order more!
Awesome! Thank you!
hey girl! not sure if you know this but e6000 is toxic wet or dry! I wouldn't use e6000 to rhinestone anything that liquid or food will be touting. Also! you should epoxy single walled plastic cups as the toxins will escape into the drink though the plastic. awesome cup though!
I agree about the expoxy
Thank u for this Im going to make one for my daughter for Christmas
Hello it's 2022...love your channel and high Quality Rhinestones on Etsy❤️
Inspired to try these, I bought some cups but they are for hot or cold drinnks, would you advise that they only be used with cold drinks? Will it affect the glue if hot drinks are in the cup do you know?
the ones with a straw are cold only and the ones with the hot lid are hot only
Love the colors
This was awesome! Thank you
Glad you enjoyed it!
These particular cups sweat on the outside, does this affect the finished product? I have bought tons of rhinestones from your shop, but I have been reluctant to try them on a project that this due to the condensation. Any advice on this?
Can’t wait to get my order. I’m so excited!!
Can you wash the tumbler with out the paint coming off?
Hi... If you weren't doing this for a tutorial, would you have added the epoxy or sealant to the acrylic paint before putting on the pearls??
Yes, I definitely recommend sealing the paint before adding the embellishments.
omg i just ordered from your shop . cant wait
Thank you so much for shopping with me.
Hi there! Lovely work! I'm about to purchase some of your packs and I'm just curious how many are needed to do a cup this size?
Hi there, normally 3 to 5 are sufficient for a 24 oz or you could go with one of our 6 oz jars of the mixes that would be enough for a tumbler.
This is super beautiful and I would love to try one of these I’m just wondering what are the care instructions on this if you wash it was soap and water will the rhinestones fall off. And what about bright tone could you put bright tone over it if you wanted to thank you
Excellent job.. With this cup, can a person use got it cold drink?
Thank you for the video, such a beautiful color combo 😍. I was wondering if you had to sand down the grooves on the sides of the lid to get the rhinestones to lay flat? Or did you just use rhinestones that fit between the little grooves? ( if so were the little grooves noticeable after?) Sorry for all the questions, a huge thank you in advance 💗💗
Hi, this one actually didn't have those grooves on the side of the lid.
I’m getting into this again and I visited your site and I didn’t see this mix available will you restock soon?
I'm new you this... But how do you guys wash these after using them with a drink?
Do you find after washing the cup a few times that they fall off??
Hello new subbie here! I ABSOLUTELY LOVE! All of your projects! You are very inspirational! I definitely want to try this! ❤️
Beautiful cup
I wish I could get one of these plastic cup to do it at Jamaica
Very nice!
Thank you
How do you stop the stones from falling off the top ?i have tried e6000 and mine come off.
I use Liquid Fusion because e6000 is toxic. I've never had anything fall off.
Sand the tumbler first
Hi I was wondering what you use to seal it ?
I'm so confused... so u paint it if u want then just glue stones on and ur done..... or do u paint n then resin then stones
I hope this is not a silly question but is this cup still able to get the lid on with the pearls and rhinestones so close to the edge? Or did you try the lid on before you began? I think this is absolutely beautiful and I know my sister would love these.
Hi, yes the lid still goes on fine, but I would recommend not putting the larger pearls at the top. Also you can check as you are starting to work on the top to make sure you are able to securely put the lid on.
Blingee Thingee thank you so much. I ordered sOme of your pearl and rhinestone mixes a while back and now I know what I will do with the ones I had left over from my last project. Thank you for taking time to answer my question. Much appreciated.
Hi beautiful work!!! 😍 how much would you charge for a cup like this , and I noticed you have bulk jars would one be enough for a 20 oz cup ?
Hi, yes, 1 of the bulk jars would be enough for this project.
I only buy my rhinestones from you. :) 😀 Does the condensation make the glue weak? or becauae it's plastic flex?
Hi, Thank you so much for shopping with me. I personally have never had an issue with that as far as condensation goes.
Ty for this tutorial! Luv ths color mix. Question.. Do u separate the pearls/rhinestones or u just pick any one??
Hi, I personally don't separate them. I just randomly pick them up when applying them to the surface I'm working on. Thanks for watching.
Would you recommend sealing everything with epoxy? I did one and the rhinestones on the kid keep falling off every time I open or close it 😢
No you don't want to epoxy over it, it will dull the sparkle on the stones. Use a NON TOXIC perm glue for a drinking cup. Gem tac has worked really well for me and a few others
@@dawn9540 what kind of glue?
@@dawn9540 gem tac slides off too much for me
Hello. How many packs of your pearl mixes did you have to use for this cup.
Hi, for the 20 oz, I used 3 packs
Blingee Thingee thank you 😊
Hey Christy it’s Michael Jeanettes son! :) loved this video! I wanna have you stone a phone case for me! I can hear Jon watching TV in the background :)
Hi Michael!!! Yep, I feel like every video I do John has always got the tv blasting in the background:) Hope you are doing well. I'm not making custom cases right now, but if there is a particular rhinestone you like in my shop , I'd be more than happy to send you some stones and a tool to help you pick up the rhinestones and the glue if you wanna try to DIY a case. I've still got the same mobile number. Just shoot me a text.
How many packs do you need for a 35 ounce tumbler
How much would you sell a cup like this? Or maybe even just plain rhinestones all around? Thanks
Cups like this on a sturdier cup go anywhere from $70 to $200. My husband bought me one on etsy for my birthday during the summer and I think it was $185. It was really beautiful completely covered in rhinestones and 3D gems.
What sealant would you use for the paint ?
Hi, epoxy resin~
@@blingeethingee5233 thank you.
@@blingeethingee5233 So you paint, THEN epoxy, THEN apply stones?
@@blingeethingee5233 I thought they don’t add epoxy on plastic cups
Is there a link for the Starbucks cups???
I don't carry the finished product. I only sell the supplies to embellish them yourself. Link to my supply shop in the description box.
I’m aware of this. I’m wondering about to cup that I can add the pearls to 💁🏼♀️
I got mine at my local Starbucks for $3
So you don’t have to line them up in straight line for this?
Pop socket