How to Replace Front & Rear Valve Cover Gaskets 2003-2008 Honda Pilot

Поделиться
HTML-код
  • Опубликовано: 2 окт 2024
  • Buy Now!
    New Valve Cover Gasket Set from 1AAuto.com 1aau.to/ia/1AEG...
    This video shows you how to install new front & rear valve cover gaskets from TRQ on your 2003-2008 Honda Pilot. Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket set will make sure the oil stays inside the engine where it belongs!
    This repair was done on a 2007 Honda Pilot EX-L 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
    2003 Honda Pilot
    2004 Honda Pilot
    2005 Honda Pilot
    2006 Honda Pilot
    2007 Honda Pilot
    2008 Honda Pilot
    Tools you will need:
    • Flat Blade Screwdriver 1aau.to/oby4/1A...
    • Phillips Head Screwdriver 1aau.to/oby4/1A...
    • 10mm Wrench 1aau.to/o66/1AX...
    • 10mm Socket 1aau.to/obvH/1A...
    • 12mm Socket 1aau.to/obSh/1A...
    • 8mm Socket 1aau.to/obvH/1A...
    • Seal Puller 1aau.to/og/1AXA...
    • Trim Tool Set 1aau.to/oaoJ/1A...
    • Pliers
    • 1-3/16 Socket
    • Ratchet 1aau.to/obU7/1A...
    • Torque Wrench 1aau.to/oaYa/1A...
    • Brake Parts Cleaner
    • Cloth Rags 1aau.to/oJk/1AX...
    • Gloves 1aau.to/oaHB/1A...
    • Safety Glasses
    • 6mm Hex Socket
    • Razor Blade / Gasket Scraper
    • Rubber Mallet
    • Sanding Block
    • Wheel Chocks
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии • 19

  • @TRQ
    @TRQ  8 месяцев назад +1

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @elmacanon1324
    @elmacanon1324 5 месяцев назад +1

    All I can say is, OUTSTANDING video brother!
    Very detailed and every step is illustrated, no skipping or sidestepping. Just, wow!
    Thank you!
    Now to order all the parts needed and then, get busy.

  • @TeamBlimp7
    @TeamBlimp7 7 месяцев назад +11

    That moment of silence @ 9:37 when the connecter for the coil falls into the abyss of the backside of the engine bay 😂

  • @rileyspence1403
    @rileyspence1403 5 месяцев назад +5

    Fyi: the 2 wheel drive valve cover gaskets are cheaper as 1 of them is smaller then the other. 4 wheel drive both gaskets are the same size!

  • @ismae55
    @ismae55 3 месяца назад +1

    Is rtv or some form of sealant not needed?

  • @vicburt6001
    @vicburt6001 6 месяцев назад +2

    The rear isn't as bad as expected just took a little extra work to maneuver it under the wiring harness and over the spark plug tubes.

  • @mikeryan3948
    @mikeryan3948 6 месяцев назад

    Why when I look up the intake gasket for this engine. The replacement part for it has square openings on it and they show round gaskets with it also. When you take this off you show a upper and lower gasket on the intake. Am I looking up the wrong thing.

  • @kbowlden94
    @kbowlden94 2 месяца назад

    The part kit you link in the description says it doesnt fit 2003 Honda Pilot. Seems risky to reuse those plenum gaskets.

  • @timmybob2028
    @timmybob2028 5 месяцев назад +1

    Is sealant not needed when installing the new gasket?

  • @duanebartlett4885
    @duanebartlett4885 4 месяца назад

    Dang my 2006 3.5L doesn't have any rusted parts like that one. That car must have lived near the ocean with all those rusted parts. Jus sayin!

  • @blitzcrusher299
    @blitzcrusher299 8 месяцев назад +1

    Great video. Thank you.

  • @kentsang6330
    @kentsang6330 5 месяцев назад

    Isn’t the torque is 8.7 ft pd. Seems like your torquing more then that 😅just wanna make sure , but good video

  • @carlosestrada6348
    @carlosestrada6348 3 месяца назад

    15:10 when he’s putting in the new gasket there is clearly an indexing point where the tab should be on the other side of the valve cover.

  • @ChargerusPrime
    @ChargerusPrime 3 месяца назад

    Im watchin this because i have to replace them on my moms pilot. Then i have to recharge the AC.

  • @onlyboutthabizness
    @onlyboutthabizness 6 месяцев назад

    Is it just me and this 300k motor but there are many more hoses that seem to be glued on so I don't want to damage them and the maf and others are not the same ...is this a 3.5 04 pilot?

  • @markchambers8641
    @markchambers8641 4 месяца назад

    You just hopefully saved me an engine replacement. ❤❤

  • @littlepepper4370
    @littlepepper4370 6 месяцев назад

    That rear valve cover is going to be a challenge, there’s tiny seepage of oil around the coil pack on one of the rear spark plugs and the connector was so crusted it snapped lol

  • @slowgoat6089
    @slowgoat6089 7 месяцев назад +2

    Worst design ever 😡

  • @DaddyWorks
    @DaddyWorks 7 месяцев назад +1

    Great video. Am about to start the day.