@@admintuning when will you be in NJ/NY area? I got a tune and the throttle is acting up on UPREV. Made 342/275 STD and feel like they left a lot on the table.
I owned a 370Z and fell I love with the VQ then kids came and I got ahold of a 2014 Q50. Wanted to keep that wonderful engine now just need to get these Bolt ons to open her up.
I’m sure this would be the std spec moncef was talking about chasing numbers. When I got my 3.7 back in 16 I saw people with higher numbers than me and I had more mods. I pushed 289whp and 250trq. Ark cbe Fast intention test pipe Stillen crank pulley Afe short ram intake I didn’t know isr long tube g37 fit the Q or it would’ve been installed too, but I’m sure my local tuner was trash or stuck at tuning this seem to be super low number also sae dyno!
I can just sense the excitement in her but she trying so hard not to get over excited. This itself makes me so happy lmao! can't wait to get my car tuned
What were the STOCK Dyno numbers? It’s the increase percentage of stock -> tuned that makes most sense since the diversity of dynos show a variety of hp/torque figures.
I recently bought one of these and it's fun to drive!! My first car above 300hp, a noobie you could say. How much for a setup like that and what's the maintenance on these features? Will it shorten the lifespan of any of the components?
Since no one else answered you i will. I own a g37x and have look into mods very heavily. Fuck the injectors unless you’re gonna fuel swap to e85. I would do test pipes, cat back(with a nice y pipe), full 3 inch intake, sway bars, and some nice lowering springs or shocks and youll have 360 whp one something that handles as good as a GTR. Oh and make sure your on some extreme contact Yokohama’s or a nice tire like them.
@@nismo.350z2 bro you gotta quit telling people that. 1. You obviously have never driven a GTR cuz if you did you would 2. Know These cars do not handle anywhere close to GTR.
@Mind Bender - bro not everything the other guy said was wrong, but take it from someone who does not let his opinion get in the way. E30/E85 is the easiest way to reach 350 rwhp.
@Mind Bender - I will tell you maintenance there is not going to be a noticeable difference. As far as life span, one thing I learned a long time ago is if you have a performance oriented set up but drive it like it’s a normal car, they tend to last longer. If you drive it like a GTR, then it will shorten them for sure.
Damn those long tube headers really give those gains but I just refuse to spend that installation fee and I also love my artpipes but congrats to her car 🙌🏽
There’s no footage of anyone installing longtube headers on an AWD. He says the dyno is AWD. BOTH rollers are spinning but ONLY the REAR wheels are on the rollers. The fact the both rollers are spinning on a rwd q50 makes me think that these numbers are not correct
Could you say ur tunes are better now than before? Could u pull more power from the same parts if we've been tuned by u a year ago? Been wondering this since last week. Thank you sir
I have implemented new strategies on old tunes I’ve done for customers, peak power stays about the same but the midrange is nicer and power comes on quicker than it was a couple of years ago.
Question.. With e85 can u use other gas if u not in range of a e85 gas station. Secondly, can be more in depth with before tuning the necessary step need before tuning... some tuner need the ecu .. some need u to go change oil and spark plugs before they tune it... g37s 2009 do u need to upgrade the ecu before tuning it
Ive looked up long tube headers from ISR for a few weeks now online to buy, but all the places say its for 09+ g37's. I have 08 g37s sport coupe 6mt 57k miles. Will those long tube headers by ISR fit my year or will i have to settle for something else?
Perry Baxter look up “g37 isr long tube headers” click on the enjuku racing ones then you have to extend the extension harness because they are made for the g35’s 350z but they will fit if you add the harness
Hello. Quick question. I just seen your video on RUclips. Everywhere I look on the internet, I only see the isr headers for the g37 vqvhr. Are they one in the same? And do you have the product #?
KeTO BeasT84 hey man, Just be patient he is really busy with traveling to different spots with full schedules completely booked. He will get to you trust me lol I’m getting retune rn also so I’m waiting around for revised maps here and there.
I wanna come get a tune by you what’s your location and shop name in Iowa already got uprev tunes but seems like my number is low. I have an AWD so maybe can’t get headers but maybe injectors and fuel pump would get close to that number?
Did I hear that right? He said that it was Awd and I see it being rwd in the video. Not knocking the numbers but that's a strange mistake to make when going that in depth.. someone correct me
The car is RWD. The Dyno is an AWD Dyno with linked rollers which means the back wheels are spinning both the front and rear rollers on the dyno. I made this very clear in the video.
No he says it that both rollers are spinning but ONLY the REAR wheels are on the rollers. The fact the both rollers are spinning on a rwd q50 makes me think that these numbers are not correct
PPE by far but ISR if your on an extreme budget, ppe paired with the right mods and intake manifold porting on the HR/ VHR will give you an insane mid range to top end power gain. You’ll pull on most cars in ur power range with the PPE
@@vq35hr3 hi there, I just bought Q50S 3.7 and thinking about getting the PPEs header. I google and there a lots of information. Do you know place where I can buy it? For a 2015 Q50S. Thanks
I have z1 test pipes, z1 cold air intakes, and an invidia catback exhaust. Im only at 60k miles on my 2008 g37 coupe and just did the spark plugs so i can get tuned. Is this a good setup im looking to make 335-350whp once tuned by you and where can i contact you.
Idk why people are hating saying it's fake. Some people can't help it, being a hater is apart of their daily lives.
People that say this is fake, smoke mids, and if y’all can’t tune like admin, your smoking mids
We had some people say I can just type whatever HP number I want on the dyno sheet or I can heat up the weatherstation to throw the corrections off :)
@@admintuning when will you be in NJ/NY area? I got a tune and the throttle is acting up on UPREV. Made 342/275 STD and feel like they left a lot on the table.
They say it’s fake cause they never seen us 😂😂😂😂😂
Infiniti Life 👌
The fuel injectors and flex fuel kit really helped and with that free up exhaust.. great combo
I owned a 370Z and fell I love with the VQ then kids came and I got ahold of a 2014 Q50. Wanted to keep that wonderful engine now just need to get these Bolt ons to open her up.
Did you did it?
How did it went?
I made 350whp , 305torque on my 3.7 Q50 . Still on stock headers 👏🏽
how
list of mods ? and rwd or awd ?
I’m sure this would be the std spec moncef was talking about chasing numbers. When I got my 3.7 back in 16 I saw people with higher numbers than me and I had more mods. I pushed 289whp and 250trq.
Ark cbe
Fast intention test pipe
Stillen crank pulley
Afe short ram intake
I didn’t know isr long tube g37 fit the Q or it would’ve been installed too, but I’m sure my local tuner was trash or stuck at tuning this seem to be super low number also sae dyno!
@@littlej3777 289 whp or crank ?
Thank you making real world videos with no fluff.
Solid info
You the man, don’t let the Trolls get to you !! Keep putting up Numbers!!
🔥🔥Ur the man! Screw what everyone else is saying, admin is the Z G 🐐 of tunning. Still looking to have u tune my G37 IPL in the future🦾🦾
I can just sense the excitement in her but she trying so hard not to get over excited. This itself makes me so happy lmao! can't wait to get my car tuned
4:07 happy customer 🤣
Sheeeeesh that dual flame
I love seeing the behind the scenes on your ig this like a mini series you should do one like this for the DE REV UP G35/ 350z
So everyone is right, stock air boxes really are the best lol
Yep idk why people are buying cold air for the 3.7 q50
@@alphav1537...some people love the heat
@@alphav1537 Some of us learned after 🤦♂️. Could saved $400 dollars, lol
You’re dumb if she had performance CAI she probably would’ve clocked in 370-380 whp
@@ushyamamoto7098 highly doubt it unless its 3 inch intakes which barely anyone uses
Nothing sounds better than VQs !
getting a 2014 today , payed a arm and a leg for it but it’s worth it
Legit, I appreciate the explanation. 👍
Subscribed.
Moncef any chance you will ever come out to Chicago? I would love for you to tune my G. I would drive to Iowa as well!!
What were the STOCK Dyno numbers? It’s the increase percentage of stock -> tuned that makes most sense since the diversity of dynos show a variety of hp/torque figures.
Just picked up a Q70 L and looking into tuning. I miss my V8 growl but I'm having fun with this car already
Same let me know when you tune it because I was driving a kia stinger and I need a lil more kick out my q70
@@kyoakland Sport mode when I want to play with it. Oh and get a set of cold air intakes. My tune is coming soon
That vk56 is such a beautiful and unique sounding v8. Some bolt ons, maybe a cam and a tune and that thing will MOVE.
@@Yohasbing Mine is a 6 with the sport package. But the muffler delete was perfect
@@teaminfiniti4105 what you got in your
honestly great tuner but all cars come with different power from factory but he did do his work so results show
VHR is the average man (or woman's) Porsche. Solid numbers.
What should one expect on 93 instead of E85?
Amazing man! makes me want to start saving!
So fuel pump was changed to 340lp to run e85?
Yes.
I recently bought one of these and it's fun to drive!! My first car above 300hp, a noobie you could say. How much for a setup like that and what's the maintenance on these features? Will it shorten the lifespan of any of the components?
Great question 🙋♂️
Since no one else answered you i will. I own a g37x and have look into mods very heavily. Fuck the injectors unless you’re gonna fuel swap to e85. I would do test pipes, cat back(with a nice y pipe), full 3 inch intake, sway bars, and some nice lowering springs or shocks and youll have 360 whp one something that handles as good as a GTR. Oh and make sure your on some extreme contact Yokohama’s or a nice tire like them.
@@nismo.350z2 bro you gotta quit telling people that.
1. You obviously have never driven a GTR cuz if you did you would
2. Know These cars do not handle anywhere close to GTR.
@Mind Bender - bro not everything the other guy said was wrong, but take it from someone who does not let his opinion get in the way.
E30/E85 is the easiest way to reach 350 rwhp.
@Mind Bender - I will tell you maintenance there is not going to be a noticeable difference. As far as life span, one thing I learned a long time ago is if you have a performance oriented set up but drive it like it’s a normal car, they tend to last longer.
If you drive it like a GTR, then it will shorten them for sure.
Man come to Florida... Orlando..,
We’re coming to Miami area April 2 & 3.
Damn those long tube headers really give those gains but I just refuse to spend that installation fee and I also love my artpipes but congrats to her car 🙌🏽
How much they cost to install ?
@@Wavy_be_mxbbin 5 hours
Brenz _ it’s almost a 4-6 hour job so really depends on shop but expect to spend more than $400 for sure
my mechanic installed my z1 headers in like 45 mins..
Enkeis most mechanics usually charge you by the book hours even if they finish quicker
That’s one of the best sounding vq’s I’ve heard omg. That note on light throttle is the tits.
That's so sick. Was the fuel pump maxed out with those injectors?
Nope!
I like this q50.. and this is coming from a 2015 AUDI S4 OWNER
Thank you!
Beast mode
👌 BAY AREA FAWKS WIT _ ADMIN TUNING
KILLING THE INFINDOE GAME!
5:58 and see he fawks with the bay 🤟
Absolutely nuts
If we install such big injectors can we drive the car to the dyno?
No, you cannot.
I love those pops and bangs, there not popcorn it’s just bangs
Where do people get the e85 kit for the 3.7?? I can’t find any just for vr30’s
I see this is rwd. Can the same numbers be achieved with the AWD Q?
Yes
Would you fly out to Phoenix Arizona to tune a couple cars?
Add me to list lol
Ayeeee phoenix gang, add me to the list too!
Go get tuned by Gabe at Infiniti Motorsports. Big gains
Damn thats impressive!
That humidity is amazing compared to Houston. Is she taking it to the strip in Eddyville?
No actually, this car has never been tracked.
Any way to hit 300 pound feet of torque with just bolt ons and tune?
I was hoping for 93 tune just to see what pump gas would do as well was guessing low 320s on pump but who knows.
On 93 at sea level this car would do around 335-340whp.
@@admintuning would you still need the injector upgrade to accomplish this range with 93?
Moncef, my 01 Maxima needs some Love in H-town; need to link up with you.
I want to see what can be done with the VR30s
What do you think she would be making if she did upper and lower manifold and cams?
How much was for the parts? Cause you said it wasn’t that expensive. I wanna know for my 3.7. Thanks
How did you get the longtube headers to fit within the AWD? Everywhere I look companies say their products wont git awd systems
There’s no footage of anyone installing longtube headers on an AWD. He says the dyno is AWD. BOTH rollers are spinning but ONLY the REAR wheels are on the rollers. The fact the both rollers are spinning on a rwd q50 makes me think that these numbers are not correct
Could you say ur tunes are better now than before?
Could u pull more power from the same parts if we've been tuned by u a year ago? Been wondering this since last week. Thank you sir
I have implemented new strategies on old tunes I’ve done for customers, peak power stays about the same but the midrange is nicer and power comes on quicker than it was a couple of years ago.
@@admintuning Master tuner!
Great info. Any real power limitations of the Stillen exhaust on a g37 sedan? Not a fan of many of the other exhausts available.
Question..
With e85 can u use other gas if u not in range of a e85 gas station.
Secondly, can be more in depth with before tuning the necessary step need before tuning... some tuner need the ecu .. some need u to go change oil and spark plugs before they tune it... g37s 2009 do u need to upgrade the ecu before tuning it
So in other words I’m just gonna run the factory air boxes
So what kit was used for the e85 upgrade? new pump? lines?
Aem 340 pump, id1050x injectors, flex fuel kit from specialty z.
Would you recommend E85 for a drift build, for low to Mid torque etc?
How much power do you think I would get with drop in filters and a tune on my q70
Was she running e85 on those pull or 93?
When you get it on flex fuel can you put reg gas in? This premium gas is extra
Bro but whayyy... it would be worse than just running premium with no tune. Save the money on the tune and run your car the way it's intended.
Ive looked up long tube headers from ISR for a few weeks now online to buy, but all the places say its for 09+ g37's. I have 08 g37s sport coupe 6mt 57k miles.
Will those long tube headers by ISR fit my year or will i have to settle for something else?
They are all the same ISR 350Z/G35 header that fit the 370Z/G37/Q50 coupes/sedans etc.
When you buy it if you do make sure to add the extension harness
@@Wavy_be_mxbbin and what is that for?
Perry Baxter look up “g37 isr long tube headers” click on the enjuku racing ones then you have to extend the extension harness because they are made for the g35’s 350z but they will fit if you add the harness
@@thelostboy8130 02 sensor
Where can I find this setup I have a awd 3.7
So what do I need to make that on a 2015 Q50S AWD
I live a few hours from here, can I schedule an appointment to get my car tuned here?
Still running stock cats?
Hello. Quick question. I just seen your video on RUclips. Everywhere I look on the internet, I only see the isr headers for the g37 vqvhr. Are they one in the same? And do you have the product #?
They are the same.
What’s the best way to get an etune from you on my N/A DE G35?? I’ve been trying for awhile no response.. Is there long wait time for etunes??
KeTO BeasT84 hey man, Just be patient he is really busy with traveling to different spots with full schedules completely booked. He will get to you trust me lol I’m getting retune rn also so I’m waiting around for revised maps here and there.
And where to get your tune I want the same tune, but mines AWD would that make the same numbers?
So this car is pushing 400 hp with all that tune and no turbo or supercharger? 😳😳🙂 AMAZING
So is ithe Q50 bone stock ?
Are these the 34mm injectors?
Do you guys ship out a flash tune for this setup?
We remote tune setups like these all the time. Check out www.admintuning.com.
Should I twin turbo my long tube headers??
What are the stock WHP numbers on this motor? Also what’s the difference with the S and non S models?
Brakes, wheels, seats, & paddle shifters
I have a 2015 Q50 AWD What would it cost to do the mods other than intake and exhaust?
I’ve seen several vids touting the 30+ bump from their cold-air intake. Why wouldn’t that be one of the first mods?
jason starek on a 370z/g37 sure, Q50 not so much.
If you get these long tube headers do you need to buy the Extension ? It is for the Q50 2014? HELP PLEASE !!!
Are you guys still in DTX??
Now we can have our ladies race. Because there is no way my car beating yours gotta take the wins where I can get them hahaha.
We want all the smoke.
did you guys have any issues installing isr longtubes in the q50?
Just extend o2 sensors from engine harness.
Was there fuel pump added?
What were the baseline numbers before the tune?
We did not dyno this specific one , but a bone stock 3.7 Q50 will make around 280whp.
@@admintuning since the AWD isn’t on all the time does the baseline stay around the same for the AWD models or is it around the 260 mark for AWD?
Stock airboxes for q50 but intakes do help and show more power gains for g37s and 350/70s right?
Yes.
the 3.7 airboxes are the VERY last thing you.d want to spend money on as the stock ones are great.
Good stuff
Hey i was wondering can you tune an awd q50 base?
Yes -
I wanna come get a tune by you what’s your location and shop name in Iowa already got uprev tunes but seems like my number is low. I have an AWD so maybe can’t get headers but maybe injectors and fuel pump would get close to that number?
Also how much does that cost to get tunned
1k roughly
How much does a tune cost you?
admin💯
@breeann6164 does ur setup have drone ?
How much would getting a tune admin intakes new pump and injectors cost
Send me an email. moncef.faik@gmail.com.
Might be interested in purchasing
Good shit bro
Did I hear that right? He said that it was Awd and I see it being rwd in the video. Not knocking the numbers but that's a strange mistake to make when going that in depth.. someone correct me
The car is RWD. The Dyno is an AWD Dyno with linked rollers which means the back wheels are spinning both the front and rear rollers on the dyno. I made this very clear in the video.
Can I do a full bolt on wit no exhaust
Where can I get isr long tube headers for my q50 3.7
So the Idr long tube headers would fit on a 2014 q50s awd?
No he says it that both rollers are spinning but ONLY the REAR wheels are on the rollers. The fact the both rollers are spinning on a rwd q50 makes me think that these numbers are not correct
What tune is this? Please help I’m highly considering this for mine
www.admintuning.com
What do I need on my 2014 q50 premium to get some flame map tune and some bangs ?
Decat and a tune
I have a custome exhaust. Isr test pipes. Moterdyne intake manifolds injen intakes 600cc injectors on e85 making 300 whp😐
Why is the car burning oil ? Can someone please explain? I’m a newbie lol
It does not burn any.
That's unburnt gases I'm pretty sure. If you had a cat you wouldn't see them or the flames lol
Why the torque so low 291 with 350 hp that's crazy
ISR or PPE? I’m in the midst of buying headers and would really like your input Monsef.
Read description it says isr. All of his videos he says isr
Get PPEs!
PPE by far but ISR if your on an extreme budget, ppe paired with the right mods and intake manifold porting on the HR/ VHR will give you an insane mid range to top end power gain. You’ll pull on most cars in ur power range with the PPE
@@vq35hr3 hi there, I just bought Q50S 3.7 and thinking about getting the PPEs header.
I google and there a lots of information. Do you know place where I can buy it? For a 2015 Q50S.
Thanks
I need that. Backfire after a downshift
I have z1 test pipes, z1 cold air intakes, and an invidia catback exhaust. Im only at 60k miles on my 2008 g37 coupe and just did the spark plugs so i can get tuned. Is this a good setup im looking to make 335-350whp once tuned by you and where can i contact you.
Moncef drop all the link mods for this build so I can purchase and you can remotely tune it!
ISR headers - Nisformance
ARK catback - ConceptZPerformance
FlexFuel Kit - AdminTuning
K&N DropIn Filters - Amazon
ID1050X injectors & 340LPH pump - AdminTuning
ECUTEK tune - AdminTuning