Awesome! Just a tip for beginners... It's always a good idea to test fit with the buckle you are going to use and with the watch you want to put it on before you finish your edges. If you need to sand more for it to fit, you will have to start your edges over again.
Excellent stuff. As you say, it’s simple to make but I think that simplicity along with the choice of leather and, most importantly, accuracy in the work, makes the end product very appealing. It’s simplicity in aesthetic has charm that other more complex straps lack. Another success
Love your ideas and creative work. This may look simple but it is probably still hard for us with little or no experience but your videos always motivates me to try. Keep up the good work!
thank you! easy to make as a beginner, however for the life of me I can't seem to keep the edge straight :( the buckle and spring bar ends were too large by about 1mm after I cut, tried sanding it down but it was not making much progress, so then I try to correct it by cutting a little bit with x-secto knife and got the spring bars and buckle fit but while getting everything fit I got the outline all crooked, and the more I tried to correct it but cutting the edge the more crooked it becomes. Any tip on how to make minor adjustment without ruining the outline of the strap?
Do you have to dye, burnish, and use tokonole on the sides? Is that purely an aesthetic choice or is there a functional reason for doing that? I'm curious about making my own watch strap, but have never worked with leather before. If you need to stain and burnish the sides to prevent fraying or other damage, I understand. But if it's just to make it look attractive, then I might skip that step!
Umm. Glued up ends before you put the buckle in? Does that buckle have a removable pin? How did you do that? Also with no knot do your stitches stay put or do you find they pull through after a bit if wear?
It depends on the glue, but most leather adhesives on the market are very strong so it’s strong enough. Also he uses strong nylon thread so that will make it last longer.
I like your video very much and have been following it. Recently, I also started to make model war videos. I really hope to get the guidance and help of the master, thank you very much! ! !
![Lets make Leather Apple Watch strap by hand⌚️ [PDF Pattern]](http://i.ytimg.com/vi/jBa77sgboc8/mqdefault.jpg)
![Lets make Leather Apple Watch strap by hand⌚️ [PDF Pattern]](/img/tr.png)
Супер, без всяких выкрутасов. Просто и со вкусом. Повторить может каждый. Спасибо!!!!!!!!!!!
Awesome! Just a tip for beginners... It's always a good idea to test fit with the buckle you are going to use and with the watch you want to put it on before you finish your edges. If you need to sand more for it to fit, you will have to start your edges over again.
Excellent stuff. As you say, it’s simple to make but I think that simplicity along with the choice of leather and, most importantly, accuracy in the work, makes the end product very appealing. It’s simplicity in aesthetic has charm that other more complex straps lack. Another success
Simple yet gorgeous-like everything you make!
I LOVE the Braun AW60, And the custom strap makes it even better. 👍👍👍👍👍
Beautiful !!!! Thanks for the tutorial….👍🏼👍🏼👍🏼👍🏼
Дякую за урок та за викрійку, бажаю вам мільйон підписчиків
Как же это красиво !!! Благодарю Вас!!!
Love your ideas and creative work. This may look simple but it is probably still hard for us with little or no experience but your videos always motivates me to try. Keep up the good work!
Right! I always want to make difficult things easy. Thanks for your saying!
I'm in the 0:06 of the video and I already have something to say; Fam, that's one nice looking timepiece you've got there!
Many thanks and glad to see you back.
Im so glad to hear that ☺
Best strap I've ever seen!!!
Thanks for your compliments!
Amazing watchstrap and wonderful watch!! 👍👍👍
Love it! I’m planning to replace my watch strap. Simple and great design!
Loving these simple projects Hahns 😀. Glad you're back, you've been missed.💓💓
I missed so much!!
@@HahnsAteliertell me the watch name????? 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Se ve que es fácil de hacer, fácil para un experto en ese oficio; ya en la práctica echando a perder se aprende 😅
Bht Beautiful Very Very Beautiful Work 💕
Hypnotic and relaxing like a mandala
Good work and good video friend 👍🏻
Thank you 🌹🌹🌹🌹🌹
Merci pour ce partage, travail magnifique... Bravo !!! Que du plaisir
And I hope that in the future more people will be interested in such good videos. 😉
Beautiful 😍 !!!
Toller Jop und tolle Insperation
you are amazing bro i learn alot from you. thank you
love the video, could you tell me about of this watch name?
thank you! easy to make as a beginner, however for the life of me I can't seem to keep the edge straight :( the buckle and spring bar ends were too large by about 1mm after I cut, tried sanding it down but it was not making much progress, so then I try to correct it by cutting a little bit with x-secto knife and got the spring bars and buckle fit but while getting everything fit I got the outline all crooked, and the more I tried to correct it but cutting the edge the more crooked it becomes. Any tip on how to make minor adjustment without ruining the outline of the strap?
A cada postagem sua eu me encanto mais. Obrigada
Thanks a lot it helped me make one
what glue are you.use
Muy buen trabajo,eres un gran artesano, felicitaciones!!!
Спасибо за твое творчество!!!
thanks for sharing .. awesome little project but still requiring patience and developing skills
Hi my friend. I tried to make simple process as possible as I can. But needs to practice right :)
Hermoso, gracias por los subtítulos.
good job. thank you 👍👍
Do you have to dye, burnish, and use tokonole on the sides? Is that purely an aesthetic choice or is there a functional reason for doing that? I'm curious about making my own watch strap, but have never worked with leather before. If you need to stain and burnish the sides to prevent fraying or other damage, I understand. But if it's just to make it look attractive, then I might skip that step!
Wow 👌 👏 😍
Gracias
간단하지만 하안님이 만들면 명품같은 느낌이!!
명품이라니.. 넘넘 과찬이십니다-!! 🙏 감사합니다!
What watch is that, please? Looks very nice..
Really nice work man!
Simple and elegant
Muy bueno y facil gra ias
I liked the concept, overall great video
브라이들 가죽에는 따로 보강재를 사용하지 않아도 괜찮은건가요?
I will try this.
can you tell me what glue you used to cover trap's side
This work is so beautiful and the watch is so nice
Thanks a lot-!
If you teach this method
Sir your watch company name
Your country
great job but i loved the ring which hold the logo
Отлично! Спасибо Вам! 🤝 Очень красиво! 🔥
Nice job ! But I came also because of the watch. Witch one is it ?
Umm. Glued up ends before you put the buckle in? Does that buckle have a removable pin? How did you do that? Also with no knot do your stitches stay put or do you find they pull through after a bit if wear?
Great. Good job.
Thank you for sharing the templates))
Una pregunta el cuero es curtido al vegetal? se puede hacer también con cuero curtido al cromo?
thank a lot
Magnifique 🙂👏
튼튼해보이고 좋네요
항상 응원해주셔서 감사합니다-! ^^
GUAUUU QUE GRAN ESTILO..
こちらの型紙はラグ幅何mmなのでしょうか？
I WISH TO SEE YOUR WORK DAILY IT'S REALLY INSPIRING ME,
COULD YOU PLEASE INFORM ME WHERE I CAN TO PURCHASE CRAFT TOOLS FULL
Nice i like it
Saludos, qué tipo de hilo utiliza para esta correa? Gracias! 👍🏻
Good job
When you glue the leather pieces together without stitching the whole way is it strong enough? I'm learning to make watch straps now :)
It depends on the glue, but most leather adhesives on the market are very strong so it’s strong enough. Also he uses strong nylon thread so that will make it last longer.
Parabéns!!!
Vídeos maravilhosos 🖖👏
from the pattern you provided, for what size lug is it?
Watch looks good too, what is the model?
Excelente trabajo!
Спасибо, за очередной урок!!!
Can anyone tell me the name of the watch 🙏🙏🙏🙏🙏🙏🙏🙏🙏. I want to buy it really
Nice! Thanks
Voy a intentar.
아주 깔끔한 시계줄 이네요.. ^^
영상 감사합니다.~
심플하죠~ 항상 감사합니다 ^^
Really cool
Welcome back!!!!
Thanks Moor, Im so glad!!! :)
Привет,как всегда 👍 классный видео урок.
Классно! Давно хотел начать работать с кожей! А что за модель часов использовалась на съемках?)
ЛАЙК с меня. Спасибо за шаблон.
superb! well done
Thanks!
I like your video very much and have been following it. Recently, I also started to make model war videos. I really hope to get the guidance and help of the master, thank you very much! ! !
Gostei do relógio onde eu compro um desse
What size oval punch do you use please?
Beautiful
Мне понравилось, лайк поставил✌️👍
Я так рад!
Like. Again and again.
Cool video, hello from Russia
Thanks and welcome!!
I love it!
Hermosa..paso a paso.... gracias
what is the name of the watch type?
TEBRİKLER
Genial! Excelente trabajo
How did l buy it for my seiko watch ,Thank You ..
I don't sell actual product. Sorry not that helped!
can I know what the watch brand is in this video?
wow so clean！
what brand of watch is this
Braun
What watch is bro? Please
I wish i could have a leather belt madey by u for huawei band a2 fit band 🤭🤭
Thank you so much...
Okay U got a new subscriber here 😁 i love this video so much it's so relaxing and interesting at the same time 😊 CONGRATS ON YOUR JOB!
Hi! Thanks for join leather crafting!
Кстати, что за часы? Очень понравились