Safely Jacking Up and Supporting your Porsche Macan (P95B 2015 - 2023)
HTML-код
- Опубликовано: 17 сен 2024
- Like most modern vehicles the Porsche Macan is not really set up for the DIY'er to easily lift and support. It is not really difficult but you need to take your time and make sure you are doing everything correctly to avoid damaging yourself or the vehicle.
Read the Full Article: www.pelicanpar...
Time: 30 minutes
Tab: $0
Tools: Quick Jack:www.pelicanpar... or Jack:www.pelicanpar... and stands, wheel chocks: www.pelicanpar...
Applicable Models: Porsche Macan (2014-21)
Hot Tip: Work on flat, hard, level ground
Performance Gain: Servicing your vehicle
Complementary Modification: Change Your Air filters
Shop Porsche Macan Parts & Accessories: www.pelicanpar...
More Macan DIY Articles: www.pelicanpar...
Applicable Models:
Porsche Macan (2015 - 2023)
Porsche Macan GTS Sport Utility (2017-18)
Porsche Macan Turbo Sport Utility (2015-18)
Thanks for the video.
You bet
Thank you for the video, glad to see it's not as complicated as I'd feared. Does the auto level need to be turned back on once the vehicle is safely back on the ground or does it auto activate once the ignition is turned on?
What is the year and model of vehicle?
Its not clear on this video where the Jack stand points are for the rear. The lift points are easily identifiable (2:49) but for the rear I saw a panel on the left rear but was not clear about the right rear.
What is the year and model of vehicle are you working on?
@@pelicanparts 2018 macan base model
This video doesn’t tell you to lean the Jack back to 45 degrees with respect to the base plate BEFORE engaging it. If you don’t the car will shift laterally, like it did on me! Major outpoint with these instructions!
Thanks for the additional info and feedback. We appreciate it.
Do you think it would be possible to jack up the car from the factory lift points that it travels on while being built?
I have not tried this, so can't be sure.
I"m trying to order the quick jacks. what is the make and model? Also do I need to order the kit with the round rubber plates separately form you?
With your vehicle info handy, give The Pelican Parts parts specialists a call at 1-888-280-7799. They can figure out what jack kit you need.
good video thanks 🤠
Thank you!
Im too poor for quick jacks where can i get a reliable jack that is NOT 1500
Check out floor jacks and jack stands. www.pelicanparts.com/More_Info/PEL011362SCH01AKT.htm?pn=PEL-011362SCH01AKT&bc=c&SVSVSI=
Jack points allow up to 2.5" diameter pads to fit over them without pinching cabling. Esco stands are 4.5" in diameter. They don't fit in the opening. Disappointing instructions.
What year vehicle are you working on?
Apparently Porsche didn't decide to put the key to remove the freaking locking lug nut
A mechanic may have mistakenly left it out.