Hey Binh, I wanted to thank you for your time and dedication on doing this conversion and doing a write up on it. I was reading through the thread and looking at your comments but I couldn't find where you purchased the aftermarket grill. Do you still have the link to it? Please anything helps :(
another guy here to say thank you for all the information you've provided on here & the forums that has assisted many owners like me to do these mods at home.
something about that facelift look so amazing, I'm thinking about buying a 2015IS but now this got me wondering what If i just buy the older gen and do this? it'd be a lot cheaper too
Hello I just bought this front bumper and it does not fit my car I brought it to the shop and they said that it does not fit around the headlamp it is elongated
@@TunerwithKids we trimmed it down a bit and it fits perfectly now, thank you Tuner with Kids, I just bought the emblem logo in your bio, will it fit the grill? it looks really big in person
Hey Binh, thanks for making this video! I got the same bumper ready to be installed but I got a question; the 2IS has only two parking sensors in the front bumper and the 3IS bumper has 4 holes. I was thinking of reusing my existing sensors in the holes on the side because they are also the same body color but on the 3IS bumper the sensors are more angled to the side and I’m worried it will not register any objects at the front anymore. I’m now thinking of putting the two sensors in the grill so I have more “sensoring” at the front if you know what I mean… what’s your take on this?
Most that have sensors use the grill holes since those were for the 3IS parking sensors. Need the OEM brackets for sensor and custom fit yours into them.
@@TunerwithKids i have hids projectors in the fog lights. Can you recommend something to replace it with that's good quality? Something that works with the hids preferably.
I have an OE aftermarket grill that has a slot for the bottom tab. The black one that come with the bumper doesn’t have the hole. You need to cut a hole or trim the tab on the emblem. I added some 3M tape and used the ring clips I bought at Ace hardware.
It comes with OE style LED Fog lights used on newer Lexus. I ended up swapping in some Toyota/Lexus Morimoto LED black housing fog. They weren’t bolt on though, I had to make a small bracket to offset one of the holes and clock it to be even.
This exact lip would be part of the bumper but you can try emailing the seller on Ebay if they have it separate for sale. I previously bought from ikon motorsports and they sold me lip after the initial order. They are out of stock right now. Check the other sellers in my links.
Everything you need to know is on this clublexus thread. This is where all my content on this bumper started. www.clublexus.com/forums/is-2nd-gen-2006-2013/872488-ebay-bumper-2is-to-3is-conversion-7.html
For 2012, it should work with the brackets. You will need to trim the edge of the crash bar. If you look at the links in the video description, there is a ClubLexus forum thread with all the photos.
Hi Binh are you able to share the model number or link to the bumper foam protector you’ve fitted? I don’t think it’s a standard part for UK spec vehicles so unable to locate it on my OEM bumper
Hunter Fowler good choice, not sure if you are a DIYer, but recommend fitting it and make any adjustments and trimming before the shop. I never trust shops to do it right. I just dropped my Sienna for warranty repaint. They half assed it and fixed the spot, they recleared the whole bumper without any prep or fixing chips. Now I have clear coated chips, dirt, and bugs. I’m making them redo it.
Just wondering if you will be willing to work on my vehicle just like that on my 2012 Lexus is300 and how much will you charge going to do something as soon as possible thanks let me know Franco
I got this bumper for my ‘08 Lexus IS 350 but there is a bit gap between the vendor and bumper so should I change the bracket? Or how can I fix the gap? Mines literally looks like yours
@@Ajnabizada nope. Before I started documenting everything. The photos give you the details on everything that needs to be trimmed. My post have all the detailed photos and write up.
Franklin Vargas you gotta trim the bracket on the grill at the top to clear the engine cover. I made that custom bracket. You gotta cut the bottom ram air duct for the brakes too. Not 100% bolt on.
Also check the thread on ClubLexus for detailed pictures of the stuff I ended up trimming. www.clublexus.com/forums/is-2nd-gen-2006-2013/872488-ebay-bumper-2is-to-3is-conversion.html
That might be hard to source now. They don’t sell separately and they used to split them when iKon Motorsport sold them but probably don’t anymore due to limited supply.
Also, I’m very OCD and perfectionist, some people wouldn’t go to the extents I do when I DIY stuff for my cars. You can pretty much slap this on out of the box with a trim of the reinforcement and air ducts.
Hey Binh I'm trying to replace my headlights but my car has factory HIDs and all I could find are replacements that only fits "2006-2009 Lexus IS250/IS350 with Factory Halogen Headlights Models Only" Did you have to do a conversion?
Hey not sure if you still follow this thread. I've been trying for the life of me to figure out what rims you have on this car. If you see this would you mind sharing. Thanks...Great content
They are Avus forged. It was one of the many 3-piece forged wheel companies in Miami in the 2000s. Most are defunct now and the companies have been sold and the intellectual property passed around last few years.
You’re have to go thru Ali Express or some other site like that. I think there’s a guy, Scott, on the IS FB groups that got it for $1,500 USD shipped to NZ.
Yes the bumper and kit comes with the OE style Lexus Fog lights. The bumpers in the description box link below should have them. They sell two versions, with and without lip.
It’s a kit I ordered from eBay. Had to run my own wires back to signal relay. The parking light wire is already at the window switches so I just tapped them.
Animal Lover a body shop would probably charge $400-$500 for paint and probably another $200 for install but since it’s aftermarket and they need to modify the car and trim stuff, it might be more.
Tuner with Kids but I can buy only the lower and attach with the upper that comes with the kit or I need to buy all upper lower and trim to fit well? I write you in Instagram and email 😄
I paid about $425 (list price for bumper on Toyota/Lexus) plus I got lip and trunk panel holes filled/painted for another $250 or so plus tax. The quote is too much. List is $425 and includes removal and installation.
The license plate holes or the sensor holes? For the plate holes, watch the whole video, I explained what I did. For the sensor holes, I have another video.
@@TunerwithKids Oh no doubt. I think that the real issue is the poor quality of products that come from China. Don't get me wrong it does look good. I am into high end car Audio so I understand that if you want to be "wowed" it will take some time and care......and probably some money lol.
Yea I usually don't have high expectations for aftermarket products. I always have to make it better or use as a starting point. Lots of car guys these days want perfect stuff for cheap prices and that's not how it works. If you have the passion, you make it better.
awesome i want it but i know how aftermarket kits are bro your really good at customizing....i seen the bumper on ebay but no 1 will no will exactly know what to do to nake it fix not even body shops they will need my car also to do work smh ....looks beast bro 😎
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F263201459185 part 2 top. These aren’t the exact ones but I don’t know where the original listing is for mine. I found the cheapest Aftermarket grills, ended up less than $100 combined.
Hey, I was thinking of installing this bumper on my lexus but I have no experience whatsoever on these type of things. Are you willing to install this for me? Just name the price, im willing to pay.
@@TunerwithKids did the same as you and another grill that looks close to the OEM, I thought about selling the Ikon one but at this point I might just break the grill to save the trim
I broke the taps on the chrome, not the center grill. The center is pretty flexible and forgiving. I just didn’t like the black and holes for JDM plate.
Part number is 52541-53010 and retails for around $4 each. Most likely a special order as I doubt many body shops notice it during front bumper repairs.
Looks so good! Awesome job! Too bad you had to work on it so much. Wish it would just fit and have all the right holes and everything when you buy it. I want to buy the same bumper to look like yours but don’t want to work on it as much as you did.
Hey man, awesome review! I saw the thread in Clublexus and noticed you had the TRD Style Canards. Do you still have those? Do you mind if I just buy them from you? Let me know. Thanks!
Hey Binh, I wanted to thank you for your time and dedication on doing this conversion and doing a write up on it. I was reading through the thread and looking at your comments but I couldn't find where you purchased the aftermarket grill. Do you still have the link to it? Please anything helps :(
Never have to buy a new lexus again! Just replace the body parts every 5 years.
No matter what Scotty Kilmer says about the large looking grille, I will always like how it looks over the old one.
Yo for real
another guy here to say thank you for all the information you've provided on here & the forums that has assisted many owners like me to do these mods at home.
something about that facelift look so amazing, I'm thinking about buying a 2015IS but now this got me wondering what If i just buy the older gen and do this? it'd be a lot cheaper too
Very impressive mate. Great job
Hello I just bought this front bumper and it does not fit my car I brought it to the shop and they said that it does not fit around the headlamp it is elongated
It should be close but may require minor trim and sanding. Unless you bought an OEM 2014 bumper, then that won’t fit.
@@TunerwithKids we trimmed it down a bit and it fits perfectly now, thank you Tuner with Kids, I just bought the emblem logo in your bio, will it fit the grill? it looks really big in person
Yes it’s a big emblem but it used on most of the newer Lexus’
@@TunerwithKids Perfect thanks for the feedback! Love your car btw its very clean!
VERY CLEAN LOOKING! Great job!
Can you post links to the grill and emblem lights pigtail ect, that you used?
Looks really good! Great job
Hey Binh, thanks for making this video! I got the same bumper ready to be installed but I got a question; the 2IS has only two parking sensors in the front bumper and the 3IS bumper has 4 holes. I was thinking of reusing my existing sensors in the holes on the side because they are also the same body color but on the 3IS bumper the sensors are more angled to the side and I’m worried it will not register any objects at the front anymore. I’m now thinking of putting the two sensors in the grill so I have more “sensoring” at the front if you know what I mean… what’s your take on this?
Most that have sensors use the grill holes since those were for the 3IS parking sensors. Need the OEM brackets for sensor and custom fit yours into them.
What did you decide to do? Let us know
So I have a 2006 Lexus is250, so your telling me this would work??
Yes 2006-2013 fits. Check out the links to the eBay listing in the description box.
Can I use the factory fog lights on a 2006 Lexus IS 350 and it would fit this new IS gen 3 bumper conversion?
No
@@TunerwithKids i have hids projectors in the fog lights. Can you recommend something to replace it with that's good quality? Something that works with the hids preferably.
If you have the JDM Fog HID projectors with DRL. Those are worth like $1k.
@@TunerwithKids they are jdm fog lights with after market hids
@@TunerwithKids they used to have halogen but i put after market hids in it
For conversions I have to get different headlights?
No.
Never seen that before...pretty cool.
all over the internet now...very common and affordable upgrade.
how did you get the emblem to fit i bought the same one and it has a tab on the bottom
I have an OE aftermarket grill that has a slot for the bottom tab. The black one that come with the bumper doesn’t have the hole. You need to cut a hole or trim the tab on the emblem. I added some 3M tape and used the ring clips I bought at Ace hardware.
@@TunerwithKids Ohhh okay thanks, I just broke off the tab and added hella 3m tape around everything it looks amazing
How to do I change the fog lights what do I swap out?
It comes with OE style LED Fog lights used on newer Lexus. I ended up swapping in some Toyota/Lexus Morimoto LED black housing fog. They weren’t bolt on though, I had to make a small bracket to offset one of the holes and clock it to be even.
Where can i get the front splitter?
I purchased this exact bumper, but the seller told me they ran out of the front lip.
It’s only available from the seller of these bumpers. It’s specifically sized for this. The regular 3IS lips are wider and need to be heated to fit.
I love your cross-dresser ISx man... this is inspiring.
After the changes, it looks like the 2020 IS Lexus model
Hi just wanted to know if there is a way where i can just get the lip for it i have the bumper??
This exact lip would be part of the bumper but you can try emailing the seller on Ebay if they have it separate for sale. I previously bought from ikon motorsports and they sold me lip after the initial order. They are out of stock right now. Check the other sellers in my links.
I have to cut the bash bar
Yea the like 2” on each side to clear the fog light mold. Ive seen some do an angle cut to clear but still keep the full width.
Do you have a picture I could see to do mine
Everything you need to know is on this clublexus thread. This is where all my content on this bumper started. www.clublexus.com/forums/is-2nd-gen-2006-2013/872488-ebay-bumper-2is-to-3is-conversion-7.html
Love it man what are the clips you used to hold in the grill called and where can I find the splitter or lip ?
I think I just used Toyota bumper bushings. amzn.to/3Y6Kllu
Hi I have a 2012 is 250 and wanna do this conversion. Did you have to change the oem bumper brackets
For 2012, it should work with the brackets. You will need to trim the edge of the crash bar. If you look at the links in the video description, there is a ClubLexus forum thread with all the photos.
I currently have a 2006 Lexus IS 350 if you would do it again which conversion kit would you go with now
Personally I like the 2014 bumper on my car, it was much better flowing and looked like it belonged to that body.
Hi Binh are you able to share the model number or link to the bumper foam protector you’ve fitted? I don’t think it’s a standard part for UK spec vehicles so unable to locate it on my OEM bumper
Check the description box for parts and numbers.
@@TunerwithKids Just double checked mate doesnt look like its listed
Foam Bumper Side Protector - ebay.to/378I6HR (P/N 52541-53010)
@@TunerwithKids cheers for that Binh 👍🏼
Looks like a newer model LS now lol
I am really trying to get the 3is bumper and i cant find from what year and make this is from. Please help if you don’t mind
this is the ebay 3IS bumper for 06-13 IS250/350. ebay.to/3sgDtFU
That looks amazing on your car, maybe I could swap mine in a couple years. Headlights are really nice too.
Nice, but I prefer the simplicity and clean lines of the 2is. Much more sleek.
Amazing work! I wonder if you have to do the same amount of trimming/cutting for the Esprit style bumper.
Nice look. This ride looks sick bro!
Hi, nice one! Just got the bumper. Can you please give me a link where to buy the fog light chrome rings? Regards
Very nice brother
Where can i find this bumper?
ebay or amazon ..
Could you send the link for the pig tails you used for the fog lights.
This should work...Amazon Prime too. amzn.to/2LNZtiQ
Tuner with Kids awesome thanks for the help. I just purchased the bumper and been considering this project for a while.
Hunter Fowler good choice, not sure if you are a DIYer, but recommend fitting it and make any adjustments and trimming before the shop. I never trust shops to do it right. I just dropped my Sienna for warranty repaint. They half assed it and fixed the spot, they recleared the whole bumper without any prep or fixing chips. Now I have clear coated chips, dirt, and bugs. I’m making them redo it.
Just wondering if you will be willing to work on my vehicle just like that on my 2012 Lexus is300 and how much will you charge going to do something as soon as possible thanks let me know Franco
Does this work on a 2010 lexus is 350c the convertible?
Yes. The convertible is same bumper fitment.
Thank you so much
How long are the 6 screws you used on the grill?
IDK. They are maybe 1/2 inch. They are OEM screws for it so you can look up the diagram for 2014-2016 Fsport.
Holy crap what effort did they put in that?
Overall the bumper is pretty solid and fitment is decent for the cost. Much better than other options out there and fiberglass ones.
I got this bumper for my ‘08 Lexus IS 350 but there is a bit gap between the vendor and bumper so should I change the bracket? Or how can I fix the gap? Mines literally looks like yours
You need to trim the tab. Look at the link in description to clublexus thread. Photos of my work on like page 3.
@@TunerwithKids is there any video? The pic aren’t that helpful
@@Ajnabizada nope. Before I started documenting everything. The photos give you the details on everything that needs to be trimmed. My post have all the detailed photos and write up.
What’s the name of the adapters and where can I get them ?
amzn.to/3ZbrncX
I need a emblem for this bumper anyone got the link?
Does the link in description work?
Yes thank you
I bought my conversion bumper on carid and the grille did not fit
Franklin Vargas you gotta trim the bracket on the grill at the top to clear the engine cover. I made that custom bracket. You gotta cut the bottom ram air duct for the brakes too. Not 100% bolt on.
Also check the thread on ClubLexus for detailed pictures of the stuff I ended up trimming. www.clublexus.com/forums/is-2nd-gen-2006-2013/872488-ebay-bumper-2is-to-3is-conversion.html
Really want to buy one but they’re out of stock rn 😢
I looked for the Toyota crv and hrv fog light ring but nothing came up. Can you give me more details. Thank you
What’s think link to the lip?
The one that comes with the eBay conversion bumper.
@@TunerwithKids I already have the bumper I just need the lip
That might be hard to source now. They don’t sell separately and they used to split them when iKon Motorsport sold them but probably don’t anymore due to limited supply.
Can you ship on bénin ?
What’s the naw of the lip .
I came with bumper. No name.
Do you know if this will fit my 2006 is220d?
Yes it’s all the same bumper.
With all these fitting complications, would it be better to buy from NIA or Car Act?
Nope, those fiberglass. Unless you like chips and cracks all over the front end, avoid fiberglass bumpers.
Also, I’m very OCD and perfectionist, some people wouldn’t go to the extents I do when I DIY stuff for my cars. You can pretty much slap this on out of the box with a trim of the reinforcement and air ducts.
Good point
Hey Binh I'm trying to replace my headlights but my car has factory HIDs and all I could find are replacements that only fits "2006-2009 Lexus IS250/IS350 with Factory Halogen Headlights Models Only" Did you have to do a conversion?
What's the grill screw part number?
Assembly Screw - Lexus (93567-A5014)
@@TunerwithKids Thanks again
Hey not sure if you still follow this thread. I've been trying for the life of me to figure out what rims you have on this car. If you see this would you mind sharing. Thanks...Great content
They are Avus forged. It was one of the many 3-piece forged wheel companies in Miami in the 2000s. Most are defunct now and the companies have been sold and the intellectual property passed around last few years.
@@TunerwithKids thanks for the reply. Absolutely love your build and am going to start work on my Is 350
Nice looking car..
Hey, would you know anywhere cheap to source a conversion kit for the 250? I am based in New Zealand
You’re have to go thru Ali Express or some other site like that. I think there’s a guy, Scott, on the IS FB groups that got it for $1,500 USD shipped to NZ.
It has the hybrid Lexus logo
Turbo Ls4 yes look alike and style emblem. Still holding up well after 18 months. But I’m garages except at work and a few days a week at airport.
Did those fog lights come with bumper or you put some on?
Yes the bumper and kit comes with the OE style Lexus Fog lights. The bumpers in the description box link below should have them. They sell two versions, with and without lip.
@@TunerwithKids you know we’re i could buy a lip?
@@guerratiburon lip only comes with the bumper. It’s fitted for it and normal 3IS lips don’t fit without mods.
Where did u get this specific bumper from?
Car act
Im in the market for one of these set ups. What bumper+grill would you recommend? Im looking for one that dosnt need the work you mentioned here
Same here. It seems like a lot of work
This doesn't look like slot of work at all
Can a 2013 rx350 be upgraded to a 2019 bumper ?
They make one but looks sold out. ebay.to/3cZahY1
0
Tuner with Kids thanks thanks thanks can I get same for an rx?
Hey Binh - I’ve been trying to find a seller of the lip but haven’t had any luck. Any suggestions?
The lip came with the bumper. They don’t sell separately.
If I have the 3is conversion kit front bumper what year model front splitter should I get 2014-2016?
Eric Ahumada it probably won’t fit. Word is that 14-16 front lip is a bit wider. Nothing a little custom work won’t fix.
How did you do the mirror lights
It’s a kit I ordered from eBay. Had to run my own wires back to signal relay. The parking light wire is already at the window switches so I just tapped them.
Here’s the link. ebay.us/m5ZZKG
How much would this cost for someone to install it?
Animal Lover a body shop would probably charge $400-$500 for paint and probably another $200 for install but since it’s aftermarket and they need to modify the car and trim stuff, it might be more.
Where you buy the grill? Is that the oem 2014 grill?
OE style aftermarket replacement. Check the links in description for them. They are like $60 each (top and bottom).
Tuner with Kids but I can buy only the lower and attach with the upper that comes with the kit or I need to buy all upper lower and trim to fit well? I write you in Instagram and email 😄
If your top is already grey then you can just buy the bottom.
Tuner with Kids ok I can buy only the lower and attach well with my upper
Yes they separate when you take bumper off.
What’s kind/name of lip you added?
No name. It was the one that came with bumper
How much you pay to paint? I’m getting quoted 530 -600 to paint and install
I paid about $425 (list price for bumper on Toyota/Lexus) plus I got lip and trunk panel holes filled/painted for another $250 or so plus tax. The quote is too much. List is $425 and includes removal and installation.
What emblem did you got? 20-4 17?
I used an aftermarket hybrid emblem
Hey buddy do you have any links r part numbers to do this conversion any info helps thanks.love how ur car looks 💯💯
Hello binh, did you transfer your stock foglight bulbs into the new bumper?
They were LED housings
Hey, could you post the link to your clublexus post on how you had to modify the bumper to fit?
Thanks!
Will this bumper fit the Lexus isf?
No
Good info ty
What did you use to cover up the holes on front grill?
The license plate holes or the sensor holes? For the plate holes, watch the whole video, I explained what I did. For the sensor holes, I have another video.
@@TunerwithKids I saw for sensors holes you ordered correct? And for the license plate holes I missed it .
License plate, I ordered a new USDM gril without it.
@@TunerwithKids would you happen to have a link?
@@guerratiburon check the description box. I have all the links and info to the parts there. I try to keep them updated every few months.
I ordered the same bumper from Ikon. How did you wire up your fog lights? My OEM harness doesn't directly clip into the harness it comes with.
@@TunerwithKids thank you
How much did it cost to paint it?
Wheel and tire specs?
Holy shit! the car looks fuckin mean.
What year is your Lexus? I’m trying to find led strip headlights for my 2010
No doubt that this looks good but wow that is a lot of work to get to that point.
No said car modding was easy or cheap.
@@TunerwithKids
Oh no doubt. I think that the real issue is the poor quality of products that come from China. Don't get me wrong it does look good. I am into high end car Audio so I understand that if you want to be "wowed" it will take some time and care......and probably some money lol.
@@TunerwithKids
Another good thing is that these cars seem to last a long long time
Yea I usually don't have high expectations for aftermarket products. I always have to make it better or use as a starting point. Lots of car guys these days want perfect stuff for cheap prices and that's not how it works. If you have the passion, you make it better.
no b4 and after pics?
anything?
Can’t post pictures on here. I have lots of club Lexus post over last 12 years
What side mirrors are those?
Damn this looks sick
But the price point for me is a pain in the ass
gotta pay to play!!!
awesome i want it but i know how aftermarket kits are bro your really good at customizing....i seen the bumper on ebay but no 1 will no will exactly know what to do to nake it fix not even body shops they will need my car also to do work smh ....looks beast bro 😎
felix morales tf did u even say bro😭
I know bro it looks like a lot of work, loads of little fiddly bits. It won't be cheap to take it to a shop to get it fitted
Reading this gave me autism
Hey how did you make those brackets that you use for the top and bottom ? They look really good
Binh Nguyen is that why you used to make the bottom one as well ?
Do you have a part number for the grill used?
Lambr00 rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F263201437690 part 1 lower portion
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F263201459185 part 2 top. These aren’t the exact ones but I don’t know where the original listing is for mine. I found the cheapest Aftermarket grills, ended up less than $100 combined.
so i can put this on my 09 is250?
???
Yeah you can
Where did you get the lip?
Emman Ramos it was part of the ikon Motorsport bumper. I ordered from them after the bumper when they restocked it.
Hey, I was thinking of installing this bumper on my lexus but I have no experience whatsoever on these type of things. Are you willing to install this for me? Just name the price, im willing to pay.
🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝🗝
So having a hard time with the grill, did your grill chrome trim break the tabs when you took the grill off that came from Ikon?
CiscoV gotta be careful, I think I broke a small tab that wasn’t important but it’s not easy to separate.
@@TunerwithKids did the same as you and another grill that looks close to the OEM, I thought about selling the Ikon one but at this point I might just break the grill to save the trim
I broke the taps on the chrome, not the center grill. The center is pretty flexible and forgiving. I just didn’t like the black and holes for JDM plate.
@@TunerwithKids Thank you very much for doing the write up in CL and making the video, extremely helpful.
What i can do if my led lights projector was broken down ?Can i repair it?
Amazing
Thanks for the video! I have searched and I can't seem to find the foam from the trim of the bumper.. can you hook me up with a link, please.....
Part number is 52541-53010 and retails for around $4 each. Most likely a special order as I doubt many body shops notice it during front bumper repairs.
@@TunerwithKids Thank you very much!!! I really searched and would have never crossed my mind that is called protector.
Looks so good! Awesome job! Too bad you had to work on it so much. Wish it would just fit and have all the right holes and everything when you buy it. I want to buy the same bumper to look like yours but don’t want to work on it as much as you did.
Anytime you want to have some more “fun” and build a bumper for me to buy from you, just let me know! 😂
Did this. Come with the grill???
Yes. A black one.
Hey man, awesome review!
I saw the thread in Clublexus and noticed you had the TRD Style Canards. Do you still have those? Do you mind if I just buy them from you? Let me know. Thanks!
Ross Santiago I have them but not using. They were only like $50 on eBay but had to mod them fit.
Tuner with Kids-Binh Nguyen did you have to mod a lot? I could buy yours if you’re not using them
Does it fit for a es350 2013
Sell me your complete front bumper plz and thank you
aleks3v3 you can buy one on eBay. ebay.to/2SU6DWh
@@TunerwithKids that link does not work. Could you re upload for the front bumper plz
ebay.to/2EvQ3c3
@@TunerwithKids thanks for the response. This means a lot
Hey I had a question
What's up?