Amazing NEW Resiners Smart Curing Machine Review So Much BETTER!!!
HTML-код
- Опубликовано: 29 сен 2024
- Trying out the newly redesigned Resiners Smart Curing Machine.
This design is absolutely spot on in every way. They really took the feedback of their customers and hit this one out of the park. Well done! Check it out!
To get your own Smart Curing Machine click the Amazon link below...
amzn.to/3N5oFTc
I love this frog. Can’t get this machine in the uk but thanks for testing it for us 😊
Hi, just found your channel. I'm a beginner as far as vlogging goes but loving it. At the moment most of my vlogs are temu hauls but once my craft room is sorted with storage I will be doing more. Loved your frog the mould is one of my favourites to use next to the large snail. The machine looks good quality.
I hope it goes good for you. Have fun with it!
I just recently found your channel and I loved this review. I heard so many bad things about the original one, but this one I'll get. Plus, I just subscribed to your channel. Thanks again.
Hi Thespoena! Very cool! I love that frog too!
Thank you so much for your kind words and support regarding our product. We are thrilled to hear that you have been enjoying it and we appreciate your positive feedback.🥰
At our company, we are constantly striving to provide our users with the best possible experience. As such, we have been working hard to optimize and upgrade our product to ensure that it meets all users needs and expectations.☺
Your feedback plays a crucial role in helping us to improve our product and we are grateful for the motivation it provides us. We will continue to take all feedback into consideration as we work towards providing our users with the best possible experience.✊
Thank you again for your support and feedback. We look forward to serving you in the future.✨🎉
Because of her review, I'm getting mine today. Thanks Belle :)
I cant see paying $50 when you can just let it sit over night
I can see that. I guess it just depends on your crafting needs. If you have need of being able to create a lot of things quickly it could definitely come in handy.
OMG I LOVE THIS! It really looks awesome, I need one of these for my channel! Thank you for the review!😍
Cranking one out every 2 hours sounds exhausting!
If only they made the lid taller so you could fit taller pieces. At least 6 inches tall
A taller lid is about the only thing I could imagine making this item any better. In all other aspects it's near perfect.
Does it cure UV resin?
No it does not, only UV light can cure UV Resin. This will cure epoxy resins quickly though
Looks like my dehydration machine😊
Very similar but from what I've heard the dehydrators can get too hot and boil your Resin. But of course I've never tried it.
That's exactly what is? It's a selling tactic.
So….I had no idea this even existed! It is so cool. This machine cures the resin by heating it up?
It cures it with constantly moving warmed air. Just the right temp, not too hot, but warm enough to cure quickly.
Ive heard you can use a dehydrator and does the same thing
I already have to many hobbies but you make me want to add resin making!
Same, but what's one more? 😂
A food dehydrator is far less expensive and does the exact same thing just so people don’t waste money.
Hmm, I've also heard that food dehydrators can get hotter and can make Resin bubble and warp. Have you had any problems with that?
Then turn the temperature down. Thr first kne theybr4leasenwas literally a repackaged food hydrator
@@shoey75 I'm just curious if you've ever tried a food dehydrator for curing resin? I have so many questions and only a few mentions that it can cause big problems. Even turning it down? I've never tried a food dehydrator so I don't know for sure.
If you haven't tried than you can't really compare.
@@shoey75 I've seen other videos that tried it and had problems. You seemed to have more knowledge on the subject so I was hoping you would be willing to share. But I guess not.
Have you experienced bubbles forming with pieces as it heats up ?
I have not because it gets just warm enough to cure faster without getting too hot. It can however trap bubbles that are already in your Resin... Because some bubbles may not have a chance to fully escape before curing. In this case you want to let the poured Resin sit for a bit before curing to allow bubbles to escape.
expensive food dehydrator
It is similar to one except from what I understand it doesn't get as hot. The only thing I've been able to find was that when people tried a real food dehydrator it didn't work out so well because it causes their resin to boil. But I'd love to hear otherwise.
Just ordered
thank you for the demo Resin Belle....so you could only put one item at a time?
Unless you were doing lots of smaller molds at once
What brand and type of resin did you use? Thanks so much!
This time it was Hippie Crafter Resin. I'm trying to use up old stock. My favorite Resin is by Counter Culture DIY.
Much better than the original. Was very disappointed with the other one. I used it once and threw it away. This one would be much better for even the thinner molds. Thank you for your improvement.
❤
Can you resin rocks and set them on the tray?
I would set them on a silicone mat cut down to size of rocks, you want the air to still move around them but don't want the resin to drip through the mesh.
And does the outside get warm/hot?
The outside does get warm but not hot. Kind of like a space heater blowing the outside gets warm but you can still touch it no problem.
Does it reduce the resin odor at all? Just curious
It does not reduce the odor of the resin. I always use a low voc Resin. I also leave the room while this is curing.
Can you put multiple molds in there?😊
So why do you need a resin curing station?
They are very handy. I mean the resin will cure on its own but most epoxy resins take 12-24 hours to cure. Putting it in the curing station speeds the curing process and most epoxy resins will cure in 2 hours. Much less time spent waiting for Resin to cure. If you are doing a project with multiple layers it could take your cure time from a week to a day.
@@ResinBelle I see, so you're speeding up drying time! I've seen these out there before and I've always thought "why? My resin cures just fine!....in 8 hours" :D
It's still a food dehydrator
It's similar to one although I don't believe it gets as hot as one so it doesn't boil the resin.
It's a food hydrator. Same technology. Why do you think they updated it. The first one they reelased was literally a repackaged food hydrator.
@@shoey75 it is a similar technology absolutely. They updated because the design wasn't working that well for resin. They listened to their customers and changed the design. A real food dehydrator does get hotter though. I've seen people boil their resin with them and it doesn't turn out well lol. I think it's great they took that technology and refined it for a different purpose. In any case it works great and I love mine
You talk so slow! I went to put the video on 2x speed, only to realize it was already on 2x speed. When you are editing videos you are able to speed things up a little so the videos don’t have such a lull in them.
Rude