Apartment Maintenance Man Training Videos
HTML-код
- Опубликовано: 1 окт 2024
- Apartment maintenance technician training.
Maintenance man marathon videos.
Here are the greatest maintenance technician tools of all time:
www.dirtymaint...
If you'd like to support the channel, you can do so by shopping for tools or whatever you need on AMAZON at no extra cost to you through this link,
amzn.to/3AaqaIU
If I've provided any value for you and you'd like to donate $1.00 or more into my online tip jar, you can do so through this link, (all cards accepted)
squareup.com/s...
This page contains affiliate links, which means that if you click on the link and make a purchase, I’ll receive a small commission at no extra cost to you. Lex Vance is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon .com
#propertymanagement #maintenancetechnician #multifamilyhousing #apartmentmaintenance #handyman #Tallahassee #hvac
Here are the greatest maintenance technician tools of all time:
www.dirtymaintenancenation.com/here-are-the-greatest-apartment-maintenance-tools-of-all-time/
If you'd like to support the channel, you can do so by shopping for tools or whatever you need on AMAZON at no extra cost to you through this link,
amzn.to/3AaqaIU
If I've provided any value for you and you'd like to donate $1.00 or more into my online tip jar, you can do so through this link, (all cards accepted)
squareup.com/store/dirty-maintenance-nation
This page contains affiliate links, which means that if you click on the link and make a purchase, I’ll receive a small commission at no extra cost to you. Lex Vance is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon .com
Love the videos skid. I'm coming up on my 3rd year of apartment maintenance work with no previous experience. Started as a porter now I'm assistant. I owe my competence to peer teaching and videos like these. Thanks for the content bud.
Thank you so much for watching!
Come on man leave the on call guy along is not easy been on call and this f company’s do not pay you good, you know it
Thank you so much for watching!
That level of AC troubleshooting and compressor replacement you should be making $100hr
Thanks for all this valuable content.
Thank you so much for watching!
The old saying from my bus stop conversations as a middle school student in the 1970's was, "It's colder than a witch's titty in a brass bra."
👍😆👍 Thank you so much for watching!
Thank you for the video. We have a basic Frigidaire refrigerator. The basement flooded. The compressor won’t come on. The relay and capacitor are good. The fans run. Is there a reset button? Do you think the compressor is bad? Thank you for your time
Compressor is bad. You can try unplugging it to see if can cool and start back up. If it doesn't, it's bad.
The compressor is a capacitor start induction run motor. This means it is using the capacitor at the start. There is an internal centrifugal switch that shuts off the start capacitor after it is at least 75% speed. If the voltage and the current are at the same phase angle the motor will not turn. The capacitor shifts the phase angle so the current and voltage are 90 degrees out of phase on the start winding and the rotor will rotate and lock on to the frequency of the Armature. Great job on the brazing and repair. ELI the ICE man. ICE I means current C means capacitance E means voltage I comes before E so Current leads voltage in a capacitive circuit. Good Day.
Thank you so much for watching!
Can you make a video for being a first time supervisor ? Or any tips been doing it for 13 years finally gonna be a supervisor. I would appreciate any feed back
Right on! Way to go, Juan! Thank you so much for watching!
Just started working for the housing authority here in sc and your channel has helped me replace my ac motor today . Thanx for the content 🧰 🇺🇸🇺🇸
Awesome! Thank you so much for watching, Keith!
I've actually had a capacitor that was tripping the breaker because it was bad. I've never seen that before.
Thank you so much for watching!
Omg it’s a Ryobi.. I thought he was a professional
👍😆👍 Thank you so much for watching!
Hi lex quick question,how many psi the nitrogen has to be to start welding? Thanks
Very little. It shows on my gauge where it has to be with orange ball. Barely feel it coming out on your hand. Thank you so much for watching!
Lex wanted to stop by and say thanks for the vids that helped me over the years. Although I'm not doing Apartment maintenance anymore, the skills elevated me to become a maintenance director at a healthcare facility. I still go back and reference videos when something major goes down. And it's good to see you still helping the up and coming Tech's. Keep doing your thing man.
Good to hear from you DC!
So your Craftsman clamp meter died Lex?
I got it as a backup. It's still kicking. Thank you so much for watching!
Do the new compressors come with oil in the compressor already. I did not see you add any oil. I assume there is oil in the compressor already.
Yes.
Great videos! Quick question, on the supply air temp - does that change based return air or outside temp? I saw it was really cold coming out in the low 30’s.
Return air would affect it. Not sure about outside air. If it was 90 degrees in the apartment, the air coming out of vents would be warmer. And the temp gun is just better than my hand. I don't use it for serious measurements.Thank you so much for watching!
How to get this kind of job ? I am interested i love the work u doing
Go to a apartment complex and fill out an application. Thank you so much for watching!
Yooo! What brand is your heat glove? Where did you get it @LexVance
It's just a regular oven mit my wife used to take hot pans out of the oven. You can get them at Walmart or any grocery store.
@@LexVance lol word thanks bud!
You should do the whole thing
Thank you so much for watching!
Thanks that was great.
Thank you so much for watching!
THESE VIDEOS ROCK
Thank you!
Great video man.
QUICK TIP-
Next time use the used nitro to blow out condenser coil so when you add charge pressures are more accurate.( instead of waiting for coil to dry after washing it to get accurate readings)
Thank you so much for watching!
Dayuuuumm 😂
look at the tag on the condenser and see how many pound of refrigerant it takes
Watching from Jacksonville Florida..I learned so much of your videos, very detailed and funny when you say something about the Infrared Gun 😅 thanks brother!
Right on! Tallahassee here. Thank you so much for watching!
I like that jst dive in and I did now I get install pretty much everything repair stoves refrigerators toilets sinks it's going on my 4th week I'm loving the journey good luck to everyone who taking that swim 🙏🏾💨💪🏾💯
Thank you so much for watching!
Great skills brother!
Thank you so much for watching!
I can’t believe you watch Lex! Rus!!! This is crazy!! I’m in the same field!!
@@jaysonescoe5799 Yeah I love his videos. I'm an old apartment maintenance guy myself. Also use to do plenty of hotel maintenance.
@@SmokyRibsBBQ wow that’s so cool!! I appreciate what you do as well!!
Awesome videos bro. When you did the continuity test on the compressor is that the same as if you did an ohm reading bw C-S-R?
Also if you're txv is bad so you ever have 0 superheat or is it just extremely high number?
No, ohm is a separate setting. My meter was set to continuity. With a bad txv you'll usually see high super and high subcool numbers. Thank you so much for watching!
I've found with these it's almost always the large burner that goes out because it the most common burner used and if your not sure what burner switch use if you got a bunch in a box in the shop you can look at the wattage on the switch. Keep up the awesome work Lex 👍🏽😎💪🏽💯💯💯💯
Thank you so much for watching!
Is that silver solder? Do you use flux? What about staybright 8? Ever use it? I like your bracelets too!
Yep silfos solder. I only use flux for plumbing soldering on copper. I don't want flux getting into the HVAC system and mixing with refrigerant. My friendship bracelets are lucky. 😆 Thank you so much for watching!
For the stove switch when the contact points on those switches or any contact surface gets greater than 50% pitted the resistance will go up across the contact and cause the current flow to go up. Then the arc causes more pitting and it is done. On old contactors for 3 phase motors they used to sell the contacts as they were a servicable item. Great work.
Thank you so much for watching!
Nice ride along ... I have that same Fieldpiece and thx for my Ryobi fix Thx
Thank you so much for watching!
didnt replace dryer, i always did
Yep. Thank you so much for watching!
supposed to every time the system is opened up but these coil units only last 3 years so a waist of time
Lex on call guy needs to watch your videos how to maybe he can learn thing or two
👍😆👍 Thank you so much for watching!
Hahaha come on man I saw you build the place you did it,,
👍😆👍 Thank you so much for watching!
What happened to the craftsman meter? That thing was a workhorse.
I got it as a backup. Thank you so much for watching!
Interesting bracelet I saw you wearing at 13:19 & 24:25 in the video
Friendship bracelet 😆. Thank you so much for watching!
Love the vids big dog love your bracelets 😊
Thank you so much for watching!
We have glass cooktops on our ranges so typically the entire thing goes out as opposed to a single element. but the switches are nearly the same. Did you test the ohms before you replaced the switch ?
No, the black marks give it away that it's fried. Thank you so much for watching!
Good deal! Loved the video ! I'll be subscribing !
How many super techs give their advice? Nice job!
On the Internet, there's a lot. 😆 Thank you so much for watching!
A lot. Too many to count. 😆
@7:24: As usual, no one turns off the laser.
Thank you so much for watching!
Oh my god Royobi oh my god ,,
👍😆👍