Ok, for you guys in a 2022 International LT625, Cummins X15, Automatic, this is the procedure. Step 1: Press the break pedal, Push in Tractor Parking Break. Step 2: Place Automatic Transmission in Drive Step 3: Place Automatic Transmission in Neutral, Pull Tractor Parking Break Step 4: Release Break Pedal, Press “Parked Regen” Momentary Switch, if done correctly Green LED Will be On and truck will Immediately idle up. During the Process, you will see the “High Exhaust Temperature” Light come on on the instrument cluster. Yes, it is finally working! After 1hr 24minutes process complete on this truck! Sometimes if you want it done right you gotta do it yourself, so I did!
This in not correct information for 2022 International LT 625 Cummins Automatic. The Parked Regen button is momentary switch and not click, and it does nothing but allow the green light to blink. It just sits there giving me the middle finger mate. For the love of God, update this please!!! Ok, for you guys in a 2022 International LT625, Cummins X15, Automatic, this is the procedure. Step 1: Press the break pedal, Push in Tractor Parking Break. Step 2: Place Automatic Transmission in Drive Step 3: Place Automatic Transmission in Neutral, Pull Tractor Parking Break Step 4: Release Break Pedal, Press “Parked Regen” Momentary Switch, if done correctly Green LED Will be On and truck will Immediately idle up. During the Process, you will see the “High Exhaust Temperature” Light come on on the instrument cluster. Yes, it is finally working! After 1hr 24minutes process complete on this truck! Sometimes if you want it done right you gotta do it yourself, so I did!
I press the regen and it just blinks three times and nothing happens on 2022 international lt. I made sure cruise was off, jake breaks are off, park and trl break are set
If you truck is asking for parked regeneration (DPF light solid or blinking) and you tried to perform the regeneration with the switch with no success, it means there is something wrong with the Aftertreatment device, so if that is the case try to take your truck to the nearest dealership so they can take a look, if still under warranty they might compensate for the time down. Please consult your dealer for more details. Thanks for watching.
I got mine to work on my 2021. I turned on the auto start/stop and climate control. When the engine cranked I pushed the parked regen button and it stayed on
I have seen some of your videos; good job pal! Yet, i have a question for 2019 International with A26 engine when DEF fluid has been standing for a while it prompted a low fuel while the gauge was above half and trigerred error SPN:5246 SCR ERROR SEVERE DERATE STOP ENGINE and derated me to 5mph; what is the solution to get out of it?
This is a good question, if your DEF level shows the right level and the SCR code is relate it to DEF refill needed. Your problem might be the DEF sending unit or also know as QLS (Quality Level Sensor). My suggestion is take to your nearest international dealership, I think, that might be able to replace it (1st time only, I believe) free of charge, that has been a regular issue in those international A26 engines. I hope this help you. Thanks for the awesome support to the channel.
I have a 2018 international LT and in order for the Regen to kick in, I need to run the truck until like 3 gear then stop, then regen will start automatically. And go on for about 5 min then stop. After it stop, I need to repeat again run the truck until like 3 gear for the regen to kick in again and so on so for… it takes like an hour repeating this process, can someone please helpme.
If the regeneration light is not ON or blinking. It might not need parked regeneration yet, parked regeneration only takes place if those lights switch ON. Perhaps, passive regeneration is taking place while you are driving. Thanks for watching.
Yeah, it takes around an hour (or even more in some cases), we have couple international trucks in our fleet and few drivers complains about the waiting time for the regeneration process (engine A26). Perhaps with a software update Navistar can solve this issue.
If you do not have a manual switch, perhaps needs a software update for the instrument cluster. Usually only the dealership can take care of those issues. Thanks for watching.
It's so stupid. They force you to do a parked regen on the big rigs, yet on my 2500 Silverado duramax I have to drive at highway speed for a regen. I don't have the option for a parked regen
In general, parked regeneration takes between 45 minutes to one hour to complete (with International trucks with A26 engine as exception to this because those vehicles takes more than one hour and up to two and half to finish this process) When this time is excessive, for example two hours it might be time to clean your DPF or requires an proper inspection of the aftertreatment system to check the performance of the components. Thanks for watching.
If that happens could be for the following reasons: 1. Engine is not warm enough to start the regeneration process. Warm up the engine above 110 F or 120 F so it will start the process. 2. If engine temperature is okay and still does not start, it might be a problem with the switches (disconnect both switches from the dashboard and reconnect them again). Then try again. 3. If point 1 and 2 are okay then the last thing to check is for problems relate it to the EGR, Turbocharger, engine sensor, etc. NED (Navistar software) tool is required for all these checks. Thanks for watching and I hope this information helps for your issues.
Usually, your truck must come with that features ON from the dealership, but if that is the case, before you turn off the engine it might ask you to turn on the optimized idle or it should be around the setting menu, I hope this help you, also try to contact Navistar for more information about it. Thank you for watching.
Hey, let’s talk about 2022 International LT625 Cummins Automatic Parked Regen. Your video on it is not correct for the truck I’m in. The Parked Regen button is a momentary switch in this one and not like the one in your video. Ok, for you guys in a 2022 International LT625, Cummins X15, Automatic, this is the procedure. Step 1: Press the break pedal, Push in Tractor Parking Break. Step 2: Place Automatic Transmission in Drive Step 3: Place Automatic Transmission in Neutral, Pull Tractor Parking Break Step 4: Release Break Pedal, Press “Parked Regen” Momentary Switch, if done correctly Green LED Will be On and truck will Immediately idle up. During the Process, you will see the “High Exhaust Temperature” Light come on on the instrument cluster. Yes, it is finally working! After 1hr 24minutes process complete on this truck! Sometimes if you want it done right you gotta do it yourself, so I did!
I do not work on pickup trucks but I suppose there is a switch under the dashboard or steering wheel area, just hold it for around 5 seconds and parked regeneration should take place. As long the required regeneration light is ON the instrument cluster, you should be able perform the manual parked regeneration.
Grüß dich... interessantes Video! Sehr gut!! 👍🏻 Hast du schon mal zufällig dieses Aktivwasser von einem solchen Wasserstoff Generator jemals ausprobiert? Dieses Wasser ist wirklich phänomenal! ☘ Es hilft einem echt aktiv zu bleiben . ;)
Usually parked regeneration takes between 45 minutes to one hour, the only exception I would say is the engine A26 from international that it could take up three hours.
This video save me today, thank you brother
My men get straight to the regen
Ok, for you guys in a 2022 International LT625, Cummins X15, Automatic, this is the procedure.
Step 1: Press the break pedal, Push in Tractor Parking Break.
Step 2: Place Automatic Transmission in Drive
Step 3: Place Automatic Transmission in Neutral, Pull Tractor Parking Break
Step 4: Release Break Pedal, Press “Parked Regen” Momentary Switch, if done correctly Green LED Will be On and truck will Immediately idle up. During the Process, you will see the “High Exhaust Temperature” Light come on on the instrument cluster. Yes, it is finally working!
After 1hr 24minutes process complete on this truck!
Sometimes if you want it done right you gotta do it yourself, so I did!
Mine just blinks
Edit: nm the 2nd time it worked. Thx!
This in not correct information for 2022 International LT 625 Cummins Automatic. The Parked Regen button is momentary switch and not click, and it does nothing but allow the green light to blink. It just sits there giving me the middle finger mate. For the love of God, update this please!!!
Ok, for you guys in a 2022 International LT625, Cummins X15, Automatic, this is the procedure.
Step 1: Press the break pedal, Push in Tractor Parking Break.
Step 2: Place Automatic Transmission in Drive
Step 3: Place Automatic Transmission in Neutral, Pull Tractor Parking Break
Step 4: Release Break Pedal, Press “Parked Regen” Momentary Switch, if done correctly Green LED Will be On and truck will Immediately idle up. During the Process, you will see the “High Exhaust Temperature” Light come on on the instrument cluster. Yes, it is finally working!
After 1hr 24minutes process complete on this truck!
Sometimes if you want it done right you gotta do it yourself, so I did!
Thanks for making it simple!😅
I press the regen and it just blinks three times and nothing happens on 2022 international lt. I made sure cruise was off, jake breaks are off, park and trl break are set
If you truck is asking for parked regeneration (DPF light solid or blinking) and you tried to perform the regeneration with the switch with no success, it means there is something wrong with the Aftertreatment device, so if that is the case try to take your truck to the nearest dealership so they can take a look, if still under warranty they might compensate for the time down. Please consult your dealer for more details. Thanks for watching.
Same here nothing happens
Yeah mine does the same thing it just blinks and no RPM revs I hope I don’t have to take it in The dealer takes days to get the truck back 😪
I got mine to work on my 2021. I turned on the auto start/stop and climate control. When the engine cranked I pushed the parked regen button and it stayed on
I have seen some of your videos; good job pal! Yet, i have a question for 2019 International with A26 engine when DEF fluid has been standing for a while it prompted a low fuel while the gauge was above half and trigerred error SPN:5246 SCR ERROR SEVERE DERATE STOP ENGINE and derated me to 5mph; what is the solution to get out of it?
This is a good question, if your DEF level shows the right level and the SCR code is relate it to DEF refill needed. Your problem might be the DEF sending unit or also know as QLS (Quality Level Sensor). My suggestion is take to your nearest international dealership, I think, that might be able to replace it (1st time only, I believe) free of charge, that has been a regular issue in those international A26 engines. I hope this help you. Thanks for the awesome support to the channel.
Thank you sir, god bless you
Thank you for watching. I hope you find more videos in my channel for your help.
I have a 2018 international LT and in order for the Regen to kick in, I need to run the truck until like 3 gear then stop, then regen will start automatically. And go on for about 5 min then stop. After it stop, I need to repeat again run the truck until like 3 gear for the regen to kick in again and so on so for… it takes like an hour repeating this process, can someone please helpme.
Happy I found your channel. New sub over here bro. Thank you
We're trying to get ours in the Regen mode and it won't Regen
I have an 2018 International durastar 4400. When I press the regen button the engine does not rev up. Does that mean I have to take it in for service?
If the regeneration light is not ON or blinking. It might not need parked regeneration yet, parked regeneration only takes place if those lights switch ON. Perhaps, passive regeneration is taking place while you are driving. Thanks for watching.
So mines flash then stopped it didn’t stay for more than 8 seconds then went away
Thanks bro
How long does it take while it is in the regen process for the International?? I’ve heard it can take up to an hr. Is this true?
Yeah, it takes around an hour (or even more in some cases), we have couple international trucks in our fleet and few drivers complains about the waiting time for the regeneration process (engine A26). Perhaps with a software update Navistar can solve this issue.
The example you did for the freight liner my screen doesn’t have the okay selection it just shows the soot level
If you do not have a manual switch, perhaps needs a software update for the instrument cluster. Usually only the dealership can take care of those issues. Thanks for watching.
It's so stupid. They force you to do a parked regen on the big rigs, yet on my 2500 Silverado duramax I have to drive at highway speed for a regen. I don't have the option for a parked regen
How often (time frame) does it require to be regenerated?
In general, parked regeneration takes between 45 minutes to one hour to complete (with International trucks with A26 engine as exception to this because those vehicles takes more than one hour and up to two and half to finish this process) When this time is excessive, for example two hours it might be time to clean your DPF or requires an proper inspection of the aftertreatment system to check the performance of the components. Thanks for watching.
I did this on international but after it was done the parked regen light was still on.
If that happens could be for the following reasons:
1. Engine is not warm enough to start the regeneration process. Warm up the engine above 110 F or 120 F so it will start the process.
2. If engine temperature is okay and still does not start, it might be a problem with the switches (disconnect both switches from the dashboard and reconnect them again). Then try again.
3. If point 1 and 2 are okay then the last thing to check is for problems relate it to the EGR, Turbocharger, engine sensor, etc. NED (Navistar software) tool is required for all these checks.
Thanks for watching and I hope this information helps for your issues.
How Do You Perform A Optimized Idle In A 2021 International
Usually, your truck must come with that features ON from the dealership, but if that is the case, before you turn off the engine it might ask you to turn on the optimized idle or it should be around the setting menu, I hope this help you, also try to contact Navistar for more information about it. Thank you for watching.
On the international, what do I do after rpms drop back down? Do I ever press the OK button on Parked Regen Needed Screen
You can press the OK button just to clear messages on your dashboard screen. That action does not perform parked regeneration.
Blue bird buses are based on Volvo?
Not sure, perhaps someone around here, in our RUclips community, that works on buses can reply to your question. Thanks for watching.
Hey, let’s talk about 2022 International LT625 Cummins Automatic Parked Regen. Your video on it is not correct for the truck I’m in. The Parked Regen button is a momentary switch in this one and not like the one in your video.
Ok, for you guys in a 2022 International LT625, Cummins X15, Automatic, this is the procedure.
Step 1: Press the break pedal, Push in Tractor Parking Break.
Step 2: Place Automatic Transmission in Drive
Step 3: Place Automatic Transmission in Neutral, Pull Tractor Parking Break
Step 4: Release Break Pedal, Press “Parked Regen” Momentary Switch, if done correctly Green LED Will be On and truck will Immediately idle up. During the Process, you will see the “High Exhaust Temperature” Light come on on the instrument cluster. Yes, it is finally working!
After 1hr 24minutes process complete on this truck!
Sometimes if you want it done right you gotta do it yourself, so I did!
How do you start regen on a 2013 Ford F750 with a cummins?
I do not work on pickup trucks but I suppose there is a switch under the dashboard or steering wheel area, just hold it for around 5 seconds and parked regeneration should take place. As long the required regeneration light is ON the instrument cluster, you should be able perform the manual parked regeneration.
Just do a def delete
That’s the best! DEF is garbage! Nothing but more money and problems!
😂
That costs?
Grüß dich... interessantes Video! Sehr gut!! 👍🏻
Hast du schon mal zufällig dieses Aktivwasser von einem solchen Wasserstoff Generator jemals ausprobiert?
Dieses Wasser ist wirklich phänomenal! ☘
Es hilft einem echt aktiv zu bleiben . ;)
How long do they last?
Usually parked regeneration takes between 45 minutes to one hour, the only exception I would say is the engine A26 from international that it could take up three hours.
My f#cking international didn't work about this😂😂😂😂😂
Pp
Get to it already. I don’t need a damn history before it. Hard pass. You get a thumbs down for being slower than a damn turtle.
How long will it take?
Usually to perform DPF parked regeneration, this process will take around 45 minutes to one hour. Thanks for watching.