Hi, I am sorry I don’t know, I was supplied the part from singapore from Falcon. Here is their link, they’re very helpful and ship globally. www.falconpev.com.sg I suggest chatting with them and then searching alibaba or AliExpress as you’ll get the same parts cheaper and quicker potentially. Please like and sub
You give the links for EVERYTHING in this video except for the star of the damn show: the brakes caliper mount!!!! PLEASE let me know where you got your caliper mount bracket!!!!
Hahahaha! I picked it up in singapore as there is an amazing shop there. Go to AliExpress or alibaba and look up 11x brake mount and it’s the same part for the 10x. Ride safe!! Please sub and like 👍🏼
Hello there . Nice work. Have you have any issues running the 160mm rotors?I just did that to my varla (same as the zero x10). Lots of people on the forum say that it is not a good idea.
Hi, no issues at all. I’m now on Magura MT5e calipers and 160mm rotors. Just have to be careful on cornering at high speed, watch out for kerbs and not the best on really rough terrain if I hit anything. But, 12 months on and not a single issue. Ride safe and please sub like 👍🏼
Do you know the name or part number of the part that changes the banjo to the outside? Do you simply remove it from the inside and put it on the outside?
I don't actually know as I had it done by a friend. I know magura supplied the part directly. I think you can get this from a bike shop. Worth a try I think.
Nice mate just bought nami viper going tweek it that's a really nice bit of kit got springs on mine what size would recommend front and rear any ideas on the rock shocks
I'm looking to change handlebars and I noticed that the link you provided takes me to a Wake handlebar which is exactly the same as what I already have installed. Do you have a link to the handlebar you have installed? And do you know if it will fit a bar extender to attach accessories to? The Wake bar I've found is too fat at the clamp area to fit the extension I bought.
Oh nice, you swapped out he SRAM discs for those ones. I ordered some of those exact ones as well, great to see them mounted on the 10X. Now I can't wait for my upgrades to arrive! edit: I also ordered a RockShox Monarch RL DebonAir, which I only realised after ordering it that it's bigger (wider) than the solo air version that you appear to have installed. I *hope* it still fits! :|
@@SuperMet it arrived and I installed it, been riding it for about a week. The debonair has a larger air can which requires a lot more air pressure to achieve the correct level of sag. With full ride weight (around 110kg or 240lb) I was bottoming it out just standing still, so I added some bottomless rings to the positive air chamber to reduce the space inside it. My ride weight is still too heavy to achieve the correct sag - even at 300psi - so I'll keep looking for solutions for a while. Otherwise I'll have to sell the shock and look for something more suited to the rigours of heavier riders. It's a shame, because I've felt glimpses of how amazing it can be; someone 20kg+ lighter than me would be floating on a cloud with this shock!
Ok I see that’s an issue. What a shame! Check the RockShox items as I have just incase, maybe speak to a bike shop about the weight and pressures. My shock is at 225psi according to the pump and is fine for my weight but I’m 180lbs. If not a spring unit again! I hope you get it sorted, it’s a pain I know and trail and error.
I think for the price it’s great value. I haven’t filmed one yet as I don’t know anyone with one. But the reports have been good so far, 52v with good range. 25a controllers I think? It’s a lot of scooter for the money for sure! Ride safe and sub/like please 👍🏼
Yes the eyelet needs to be swapped. I can’t remember sizes exactly as I went to a bike shop that sold Magura and they gave me the correct part. But you do need to change it over for the fitment. Ride safe! Sub and like please
Hello, I wanted to ask where you purchased the magura banjo for swapping the side of the hydraulic line ? The set you bought is exactly what I need I have the Mt5E set for my 11x
I found it on alibaba. It is the same unit used for the 11x I believe. Type in the type of mount on alibaba or AliExpress and it will come up. I don’t have the link anymore I’m sorry. Falcon PEV in singapore did used to sell it as well but it’s was big money. It is generic sizing. Sorry I don’t have more info any longer
I can’t find the item. I bought it from Magura to make the side swap. They should be able to help you. I popped into a high-end bike shop to source the part in London. I hope that helps. Please sub and like 👍🏼
@@SuperMet they can't help. I recently contacted them about it and this is what they said. Hello Roberto, your message has been passed to me from Magura Germany and I’m Glad to respond but we do not offer such fittings to switch the mounting/bleed positioning and I’m not aware of any such availability. Glad to help if able…… It's Cool tho, I made my setup work.
The brackets are the standard units used on the 11X to mount the Magura calipers. Front fits without brackets. The rear needs the new unit. Look on Falcon PEV singapore for the 11x / 10x bracket, they’re hard to get though. I went to AliExpress and found a copy item. This link is the same part. ￡11.26 | Macury Bracket For NUTT Rear Hydraulic Brake Caliper of Zero 11X Speedual Plus Electric Scooter Oil Brake Mount Holder Parts a.aliexpress.com/_mOxPEvJ Ride safe! Please sub and like 👍🏼
Hi, if I remember correctly! I think 160 rotors fit on your calipers. But! I used 11X brackets. Can buy from alibaba or a good bike shop. They’re not expensive and space the caliper out slightly for clearance.
Hello, I congratulate you, your videos are good, friend, I need your help. I have my magura mt5e brake set but I would like to know how you did to change the banjo that was on the inner side of the brake to the outer side. I understand that you have to buy the banjo kit. With the bolt by chance you will have a link where I can get them to install them to my brake system I would appreciate it very much I hope you help me with that Thank you very much I am already subscribed to your channel
Hi Ronald, yes your are correct. You need a conversion kit for the opposite side. I went to a bike shop locally and found the parts I required to make the swap. The best way is to go into a Magura seller and show them some pictures directly as I did. They will be able to help you then as I found it very hard to source the parts I needed. Without them the line is too close to the wheel and could connect. I’m sorry I don’t have a link as I never found the item online! Where are you based? London PET may have the part of your in the UK www.personalelectrictransport.co.uk Ride safe! Please sub/like 👍🏼
@@SuperMet Well, if it is really difficult to get the kit, I will do what you tell me, taking the brake system with me to the store so that they can help me directly anyway, thank you very much, I will continue to watch your videos, greetings
That’s great news. Apparently Magura only supply 4 items to each dealer a month at the moment. It is due to a massive increase in bike sales and parts! Check eBay as well but local supplier should hopefully be able to help. Ride safe!
On Magura no, you have to get the new opposite side banjo. Magura sell them but they’re very very hard to get. Go to a good bike store and they may have one. You’ll need it in reality for safety. Ride safe! Please sub and 👍🏼
I was just about to send the Magura mt5 back and seen your video, I called my local bike shop and they said that this could not be done.🤦🏼♂️ so I’m looking for the banjo to swap over also did you change the olive and connector on the break lever or use the original nutt one..
@@charlie147111 All I did was replace the banjo bolt to the other side, replaced BH90(banjo nut+olive+banjo adapter and the o rings) fitted into the magura hydraulic line and I did have to install a new olive for the brake lever since I had the OEM cable operated brakes and had to shorten the hydraulic cable. I bought the zero 10x brake adapter to make this fit all nicely, but did not need spacers at all.
Wow that’s a lot! Too many people are just being foolish on them sadly. If they were more careful and not riding on pavements things would be a bit better but they’re illegal, it’s going to happen. Thanks for the info
@@SuperMet Funny you say that. I was stopped last year by traffic police motorbikes and they warned me and said to stay on the pavement and I said I'd thought that would be unsafe for pedestrians and he said 'theres none here right now'... I was like... Wtf are you on man? Police are weird, but luckily he let me go.
Just got and miss isn’t it. I had a policeman ask the brand of my scooter! I thought he was going to confront me but was really nice and told me to ride carefully.
@@SuperMet Yeah. A very, very small percent of police are you typical geeza type bloke and have common sense and will banter with you, then you have the rest of the force who act like RoboCop and will fine and impound you to show their authority.
Wow that sucks! I can see we're probably going to get some level of regulation here in NZ at some point in the near-ish future (due to the advent of Lime scooters etc proliferating throughout our major cities, with many accidents and a few deaths), but at the moment we've got a pretty long leash as far as riding e-scooters goes. Govt tends to leave most decisions to the local govt bodies and just use outdated laws for everything else.
Are you talking brakes calipers haha so confused. The Audi had six piston calipers and the 991 turbo had 8. Are we speaking about the same things? Stay safe buddy
Do u know what banjo size screw to swap the line?
Hi, I am sorry I don’t know, I was supplied the part from singapore from Falcon. Here is their link, they’re very helpful and ship globally.
www.falconpev.com.sg
I suggest chatting with them and then searching alibaba or AliExpress as you’ll get the same parts cheaper and quicker potentially. Please like and sub
You give the links for EVERYTHING in this video except for the star of the damn show: the brakes caliper mount!!!! PLEASE let me know where you got your caliper mount bracket!!!!
Hahahaha! I picked it up in singapore as there is an amazing shop there. Go to AliExpress or alibaba and look up 11x brake mount and it’s the same part for the 10x. Ride safe!! Please sub and like 👍🏼
Hello there . Nice work. Have you have any issues running the 160mm rotors?I just did that to my varla (same as the zero x10). Lots of people on the forum say that it is not a good idea.
Hi, no issues at all. I’m now on Magura MT5e calipers and 160mm rotors. Just have to be careful on cornering at high speed, watch out for kerbs and not the best on really rough terrain if I hit anything. But, 12 months on and not a single issue. Ride safe and please sub like 👍🏼
Do you know the name or part number of the part that changes the banjo to the outside? Do you simply remove it from the inside and put it on the outside?
I don't actually know as I had it done by a friend. I know magura supplied the part directly. I think you can get this from a bike shop. Worth a try I think.
Thx
Nice mate just bought nami viper going tweek it that's a really nice bit of kit got springs on mine what size would recommend front and rear any ideas on the rock shocks
Let me check, not sure if my suppliers will know but worth checking! Ride safe, its a great machine. Please sub and like
I'm looking to change handlebars and I noticed that the link you provided takes me to a Wake handlebar which is exactly the same as what I already have installed. Do you have a link to the handlebar you have installed? And do you know if it will fit a bar extender to attach accessories to? The Wake bar I've found is too fat at the clamp area to fit the extension I bought.
Oh nice, you swapped out he SRAM discs for those ones. I ordered some of those exact ones as well, great to see them mounted on the 10X. Now I can't wait for my upgrades to arrive!
edit: I also ordered a RockShox Monarch RL DebonAir, which I only realised after ordering it that it's bigger (wider) than the solo air version that you appear to have installed. I *hope* it still fits! :|
There is room either side as long as the bolt holes still fit. It should be epic! Let me see it when it’s done
@@SuperMet Will do!
@@SuperMet it arrived and I installed it, been riding it for about a week. The debonair has a larger air can which requires a lot more air pressure to achieve the correct level of sag. With full ride weight (around 110kg or 240lb) I was bottoming it out just standing still, so I added some bottomless rings to the positive air chamber to reduce the space inside it. My ride weight is still too heavy to achieve the correct sag - even at 300psi - so I'll keep looking for solutions for a while. Otherwise I'll have to sell the shock and look for something more suited to the rigours of heavier riders. It's a shame, because I've felt glimpses of how amazing it can be; someone 20kg+ lighter than me would be floating on a cloud with this shock!
Ok I see that’s an issue. What a shame! Check the RockShox items as I have just incase, maybe speak to a bike shop about the weight and pressures. My shock is at 225psi according to the pump and is fine for my weight but I’m 180lbs. If not a spring unit again! I hope you get it sorted, it’s a pain I know and trail and error.
Where do I connect the cable
Very nice video! Is it MT5e opener or closer?
Do you know which sensor your brakes are equipped with? For engine cut off?
Yes brake cut off and the brake lights at the rear
How do i connect the the magura to work with my brake lights on my zero 10x
I can’t remember honestly it was so long ago. Go to scooter evolution on Facebook group. Matt the admin guy did it and posted fully. Please sub and 👍🏼
black to black, and blue to yellow. Well that was for my T10-DDM.
Cool! What do you think about the new Apollo Phantom?
I think for the price it’s great value. I haven’t filmed one yet as I don’t know anyone with one. But the reports have been good so far, 52v with good range. 25a controllers I think? It’s a lot of scooter for the money for sure! Ride safe and sub/like please 👍🏼
Looks beautiful, can I ask you how you got the 6mm banjo bolt through the 5mm barb eyelet?
Did you have to purchase the eyelet separately?
Cheers
Bill
Yes the eyelet needs to be swapped. I can’t remember sizes exactly as I went to a bike shop that sold Magura and they gave me the correct part. But you do need to change it over for the fitment. Ride safe! Sub and like please
Hello, I wanted to ask where you purchased the magura banjo for swapping the side of the hydraulic line ? The set you bought is exactly what I need I have the Mt5E set for my 11x
did you find anything??
@@electroctgon7008 i ended up buying a few different ones, but none worked satisfactory, all the sets had small leaks
Hello, it looks great. Which adapter did you use to mount the magura on your Zero 10X?, if you had a link to share?
I found it on alibaba. It is the same unit used for the 11x I believe. Type in the type of mount on alibaba or AliExpress and it will come up. I don’t have the link anymore I’m sorry. Falcon PEV in singapore did used to sell it as well but it’s was big money. It is generic sizing. Sorry I don’t have more info any longer
@@SuperMet ok, i'll look it up. Thanks!
Could you Link the kit you used to swap out the hose to the other side?
I can’t find the item. I bought it from Magura to make the side swap. They should be able to help you. I popped into a high-end bike shop to source the part in London. I hope that helps. Please sub and like 👍🏼
@@SuperMet they can't help. I recently contacted them about it and this is what they said.
Hello Roberto, your message has been passed to me from Magura Germany and I’m Glad to respond but we do not offer such fittings to switch the mounting/bleed positioning and I’m not aware of any such availability.
Glad to help if able……
It's Cool tho, I made my setup work.
That odd as I got all Magura parts to do the conversion. Anyway, I’m glad you got it sorted! Ride safe!
@Super Met Where did you buy the adapter?
AliExpress or alibaba 11x caliper mounting. Please sub and like thanks and ride safe!
@@SuperMet please link to the auction
Hi I don’t have a link it’s was 2 years ago. I’m sorry. Just search zero 11x caliper mount and you’ll find the correct unit. Thanks
Details on the brackets you used?
The brackets are the standard units used on the 11X to mount the Magura calipers. Front fits without brackets. The rear needs the new unit.
Look on Falcon PEV singapore for the 11x / 10x bracket, they’re hard to get though. I went to AliExpress and found a copy item. This link is the same part. ￡11.26 | Macury Bracket For NUTT Rear Hydraulic Brake Caliper of Zero 11X Speedual Plus Electric Scooter Oil Brake Mount Holder Parts
a.aliexpress.com/_mOxPEvJ
Ride safe! Please sub and like 👍🏼
I wont 2 out 160 roters on where do I get 2 x brackets
Hi, if I remember correctly! I think 160 rotors fit on your calipers. But! I used 11X brackets. Can buy from alibaba or a good bike shop. They’re not expensive and space the caliper out slightly for clearance.
Hello, I congratulate you, your videos are good, friend, I need your help. I have my magura mt5e brake set but I would like to know how you did to change the banjo that was on the inner side of the brake to the outer side. I understand that you have to buy the banjo kit. With the bolt by chance you will have a link where I can get them to install them to my brake system I would appreciate it very much I hope you help me with that Thank you very much I am already subscribed to your channel
Hi Ronald, yes your are correct. You need a conversion kit for the opposite side. I went to a bike shop locally and found the parts I required to make the swap. The best way is to go into a Magura seller and show them some pictures directly as I did. They will be able to help you then as I found it very hard to source the parts I needed. Without them the line is too close to the wheel and could connect. I’m sorry I don’t have a link as I never found the item online! Where are you based? London PET may have the part of your in the UK www.personalelectrictransport.co.uk
Ride safe! Please sub/like 👍🏼
@@SuperMet Well, if it is really difficult to get the kit, I will do what you tell me, taking the brake system with me to the store so that they can help me directly anyway, thank you very much, I will continue to watch your videos, greetings
That’s great news. Apparently Magura only supply 4 items to each dealer a month at the moment. It is due to a massive increase in bike sales and parts! Check eBay as well but local supplier should hopefully be able to help. Ride safe!
Did you need to change your cables
For the new calipers? If so, yes they’re Magura fitments and included in the box when you buy the full package. Please sub and 👍🏼
@@SuperMet thanks I did
What kind of front brake caliper bracket did you use?
The front caliper mounts directly on the 10x no mount is required. But 160mm rotor is needed for the MT5e
Good stuff man. Who are the dislikes from? So weird as there's hardly any views.
Tell me about it! Haha take the good and bad. Hopefully it will get more views likes and less dislikes. Only a quick video anyway. Thanks man! Be safe
is it possible to use the oem banjo nut and just move it from one side to the other?
On Magura no, you have to get the new opposite side banjo. Magura sell them but they’re very very hard to get. Go to a good bike store and they may have one. You’ll need it in reality for safety. Ride safe! Please sub and 👍🏼
@@SuperMet Is it possible to install the mt5e without changing banjo sides?
I was just about to send the Magura mt5 back and seen your video, I called my local bike shop and they said that this could not be done.🤦🏼♂️ so I’m looking for the banjo to swap over also did you change the olive and connector on the break lever or use the original nutt one..
@@charlie147111 All I did was replace the banjo bolt to the other side, replaced BH90(banjo nut+olive+banjo adapter and the o rings) fitted into the magura hydraulic line and I did have to install a new olive for the brake lever since I had the OEM cable operated brakes and had to shorten the hydraulic cable. I bought the zero 10x brake adapter to make this fit all nicely, but did not need spacers at all.
Just got word from a local police impound in London that they bring in around 30+ scooters a day. The police are clamping down hard it seems.
Wow that’s a lot! Too many people are just being foolish on them sadly. If they were more careful and not riding on pavements things would be a bit better but they’re illegal, it’s going to happen. Thanks for the info
@@SuperMet Funny you say that. I was stopped last year by traffic police motorbikes and they warned me and said to stay on the pavement and I said I'd thought that would be unsafe for pedestrians and he said 'theres none here right now'... I was like... Wtf are you on man?
Police are weird, but luckily he let me go.
Just got and miss isn’t it. I had a policeman ask the brand of my scooter! I thought he was going to confront me but was really nice and told me to ride carefully.
@@SuperMet Yeah. A very, very small percent of police are you typical geeza type bloke and have common sense and will banter with you, then you have the rest of the force who act like RoboCop and will fine and impound you to show their authority.
Wow that sucks! I can see we're probably going to get some level of regulation here in NZ at some point in the near-ish future (due to the advent of Lime scooters etc proliferating throughout our major cities, with many accidents and a few deaths), but at the moment we've got a pretty long leash as far as riding e-scooters goes. Govt tends to leave most decisions to the local govt bodies and just use outdated laws for everything else.
Most cars have 4 pistons? LOL WHAT? Most cars have 1 with sliding support! Where did you get that info?
My cars have 6 and 8 in each caliper. My Tesla has 4 pistons. That’s where I got it from
@@SuperMet that explains it. Tesla is not it simple 100kw car
Are you talking brakes calipers haha so confused. The Audi had six piston calipers and the 991 turbo had 8. Are we speaking about the same things? Stay safe buddy