🎧 Replacing EAR CUSHIONS on the JBL TUNE600 BTNC wireless bluetooth headphones - How to
HTML-код
- Опубликовано: 14 ноя 2018
- Explaining how to replace the ear cushions on a JBL TUNE600 bluetooth noise cancellation headphones.
The old cushions can be removed by prying between the cushion fabric and the plastic housing behind it. There are four clips that hold the cushion in place. Check out the video for the best location to start from.
When attaching the new ear cushions, remember to consider the correct side. The right side has all the buttons, while the left side has no buttons.
Also look for the three holes on the inside of the cushions. These holes have to be lined up with the two pins and the one wire on the housing. Хобби
Instructions on how to use aftermarket ear pads: ruclips.net/video/323Gxdg9MOc/видео.html
Hi @MegaSafetyFirst Do you have the link to buy the earpads? I can not find them on Amazon :/
Thanks, I was struggling on how to replace the pads. You saved me.
Happy to learn something new today. thank you
Nice almost exploded my thumbnail doing this thanks for the video
Thank you so much. Very useful video.
Thanks a lot, very helpful! 👍
Thank you, very helpful video! 🙏
Thanks man very helpfull videoo👍👍
If you ordered a smaller cushion than the original size, its still possible to put it in (if you do not wanna spend extra on buying a new one). All you need to do is to squeeze and fit the cushion around the ring.
You helped me a lot!
Helped a lot thank you
Thanks for the video.
Thanks a lot! I will have to do that soon :)
Thanks for the help!
Thanks a lot for showing
thank you! You saved me from a headache!
Did you get the plastic clips on the replacement pads too?
Thanks man!
Thank you very much , you saved me .........
btw I had already unscrewed it but still failed to attach the cushion
then i saw your video and now i feel that i am foolish but thanks a lot
Do you know where I can get the replacement?
How to remove the clip of cusion pad
i have been searching about how I can change these pads and I couldn't find about anything and you saved my day bro. Thank you so much and I have a question. I wanna change silicone type pads, do you know where I can buy ?
www.ebay.com/itm/Ear-Pads-Cushion-For-JBL-Tune-600-BTNC-tune600-bt-On-Ear-Bluetooth-headphone-/173530643875
Is it the same for JBL tune 500?
I've been trying to detach the cushion for the past ten minutes but I can't do it at all.
Try it with a screw driver
My little sister did it in 15 second
@@legalaaron0425 same but little brother.Thats why I'm here
Merci beaucoup : j'ai pu réparer mon JBL 600 car je n'osais pas démonter les oreillettes en mousse !
The new replacement cusion doesn't have the plastic clips on its back.. how do it remove it from the old one to place it on the new one?
Same problem. The one i ordered is generic
After removing the cushions from the clip, you will need a pair of common cushions and the plastic ring on the original cushion.
the cushion is glued on it, and can't be totally removed. but you don't need to remove everything. cut the excess of fabric of the original cushion. you'll need to get the plastic ring (be careful because it's essential to work), grab it, put it inside a new common cushion. once the ring is covered by it, you just need to put it right back (attention to the noise-canceling equipment). the clips will hold it just right.
There is no secret: you need to tear it apart, get the plastic ring, put it in a new cushion, clip it back. no glue. worked perfectly and the cushions I'm using are even from another brand. it's that easy
Can you show me how to remove the old cushion from the plastic ring and how to put the new cushion and ring together?
@@vinnt_tnniv can u show it in a video?
@@shanu298 he actually made one already check it out, it’s very helpful! thanks Vinn!
Where can I find the top cushion ? That one that is overhead.I need both of them.Please help me if you have any suggestions.I don't know hot to search for it.
Good question. Sorry, I have seen those being sold anywhere 😕
But I don't know how to search for them.I am not a perfect english speaker and it took me few min to find a new word "cushion".I've had these headphones for 2 and a half years.I use them anywhere, gym, running outside, at my computer.I don't want to throw them to the bin.
Did you try contacting JBL support team?
I received the ear pad replacements from them in the past. Maybe they also have the top cushion.
@@MegaSafetyFirst Nop, I didn't, but it's a good idea.Thank you for the quick answer.You are the best.
@@jCosta2274 I found it on shopee and they call it jbl tune 600btnc head beam
can i replace the earmuffs with other earmuffs brand?
I've read you could, just make sure that the dimensions are the same and the clipping method as well, since in Sony for example, the ear pads go around a ring or something and with a elastic band or similar inside the pad, holds them on it.
Where will I get this cushions
JBL customer support.
My hands are dead now lol
Hi sir iam from infia where i can find this cushion? Iam searching a lot!
Did you try contacting JBL support?
Lmao infia
Does jbl 600btnc only have an specific cushions to replace it?
technically, however, a common cushion can be used
After removing the cushions from the clip, you will need a pair of common cushions and the plastic ring on the original cushion.
the cushion is glued on it, and can't be totally removed. but you don't need to remove everything. cut the excess of the fabric of the original cushion. you'll need to get the plastic ring (be careful because it's essential to work), grab it, put it inside a new common cushion. once the ring is covered by it, you just need to put it right back (attention to the noise-canceling equipment). the clips will hold it just right.
There is no secret: you need to tear it apart, get the plastic ring, put it in a new cushion, clip it back. no glue. worked perfectly and the cushions I'm using are even from another brand. it's that easy
@@vinnt_tnniv Thank you so much for this info sir!! ❤️❤️
@@cnekac1714 you're welcome :D
@@cnekac1714
did it work?
@@vinnt_tnniv Uhmm I'm still waiting for the new common cushion to be delivered and hopefully it should work just fine 🤩
where can i buy those? do you have a link?
www.ebay.com/itm/Ear-Pads-Cushion-For-JBL-Tune-600-BTNC-tune600-bt-On-Ear-Bluetooth-headphone-/173530643875
@@lazygamer4918 Do those parts come with the plastic round part glued to the cushion ? Thanks ! :)
@@makejidamashii14 nope but it will not come out easily
How to replace the new ear pads, with the new one?
Another option
www.amazon.com/Replacement-earpads-Cushions-Tune600BTNC-Headphones/dp/B085ZMWSD4/ref=sr_1_4?dchild=1&keywords=jbl%2Btune600btnc%2Bcushion%2Breplacement&qid=1586443633&sr=8-4&th=1
What size are those. I should buy some velour pads
Diameter 70 mm, thickness about 18 mm
Errr... Now how to replace the foam? I can see only took it off and put it back.. lol
You have to purchase new ear pads
www.amazon.com/Replacement-earpads-Cushions-Tune600BTNC-Headphones/dp/B085ZMWSD4/ref=sr_1_4?dchild=1&keywords=jbl%2Btune600btnc%2Bcushion%2Breplacement&qid=1586443633&sr=8-4&th=1
@@koshaz3x I think the question is what to do when you have new ear pads which comes without round part. The video didn't show "replace ear pads", only "took off and put back the compound where one part of compound is actual ear pad".
I am not saying that the first step of replacing (shown on video) isn't important. But the second step, replacing ear pad on the round part, is quite missing.
@@kmartyCZ you're right, I my self tried to remove the plastic ring, but I'm afraid to brake it and since it doesn't come along with new ear pads, I don't want to force it.
@@koshaz3x Some news - the plastic ring is glued to the cushion, but you need it for replacement. So I tore down the old cushions and pull over the plastic ring the new ones (from here: www.aliexpress.com/item/4000694588086.html ). It works, cushions holds, but the sound is somewhat worse (noise cancellation is required now otherwise the sound sounds like plastic crucibles).
@@kmartyCZ Thank you for the update, since they're glued together, maybe I'll use a heat gun to remove them.
2nd😋😋😋
🙃. 3rd. 😋
Let’s see who’s tomorrow’s first. 😎
@@MegaSafetyFirst Yuup 101%me 😎
God that music is annoying. Why do you need music on a technical instruction video?