Hi, at time 2:04 from where I can get the LAN IP address? I do try every possible address but still not working and the (Run/Stop) keep blinking in green!! What is your suggestion?
It sounds like you have two problems. 1. The WAN port isn’t configured correctly because the router isn’t connected to the internet. If the RUN/STOP LED is blinking green it means the router isn’t online. The default setting is DHCP which means that the network you are connecting too will need to give the router an IP address automatically. If the network only allows for statically assigned devices to sit on the network then he will need to discuss this with your IT department. I would suggest reaching out to your IT department to configure the WAN port. 2. The LAN port default IP address is 192.168.0.1, once you are logged into the configuration page you will see the LAN IP address in the LAN settings. I hope this helps. If you need more information you can contact us at kebamerica.com
You should contact your OEM (original equipment manufacturer) first. If they cannot help then feel free to contact a local KEB representative here: www.keb.co.uk/contact/contact-worldwide
That can be a nice feature if you need the switch functionality. But for applications that only require a Router it adds unnecessary cost. Of course an additional switch (managed or unmanaged) can be added to the system if it is required.
Did you message or call us about these PLC monitoring questions? Our contact page is the best place to get faster answers to your questions. www.kebamerica.com/contact
Hi, at time 2:04 from where I can get the LAN IP address? I do try every possible address but still not working and the (Run/Stop) keep blinking in green!! What is your suggestion?
It sounds like you have two problems.
1. The WAN port isn’t configured correctly because the router isn’t connected to the internet. If the RUN/STOP LED is blinking green it means the router isn’t online. The default setting is DHCP which means that the network you are connecting too will need to give the router an IP address automatically. If the network only allows for statically assigned devices to sit on the network then he will need to discuss this with your IT department. I would suggest reaching out to your IT department to configure the WAN port.
2. The LAN port default IP address is 192.168.0.1, once you are logged into the configuration page you will see the LAN IP address in the LAN settings.
I hope this helps. If you need more information you can contact us at kebamerica.com
We have an Asem rk10 router, can we connect it to the internet via usb port?
hello, i´m conected with VNP by ubiquity but the option doesn´t appear on tia portal! what could it be ?
hello can i help me i have Keb F5 with motor abb how I can link with an S7-1200 PLC??
You should contact your OEM (original equipment manufacturer) first. If they cannot help then feel free to contact a local KEB representative here: www.keb.co.uk/contact/contact-worldwide
Hello there
Good solution but why wouldn't your router have more ports to act as an industrial switch and a router at the same time
That can be a nice feature if you need the switch functionality. But for applications that only require a Router it adds unnecessary cost. Of course an additional switch (managed or unmanaged) can be added to the system if it is required.
if I want to monitor many PLC's from many places and each place can monitoring every PLC's , How can achieve that?
Did you message or call us about these PLC monitoring questions? Our contact page is the best place to get faster answers to your questions. www.kebamerica.com/contact