Sounds are great in blending together. The comment volumn is about same as vid sound. Works like a charm because comment doesn't over power the reg vid sound volumn. Good job. Makes it even more of a joy to watch your posted vids. Keep up great work.
Warren you are an inspiration to all of your audience. You are an amazing person and this is evident in every video that you produce. Thank you for allowing all of us to share in all of your projects and the wonderful manner in which you approach all of them. We are all so fortunate to benefit from your skill and incredible attitude toward life as a whole.
My experience with plastic zip ties is I don't trust them because over time they will break from the weather. They are OK for certain things but something important I would use metal clamps.
Did you get the Dead Cat windscreen for that mic? Will help when outdoors like onsite in fields. Yes, its called Dead Cat for Rode mic. Anyway, sounds great! Picture looks great! Keep on truckin repair!
Look like a lot of fun, as usual. Well done! So know asked before, but are the tracks by your home same as the ones by shop? If are too bad don't have track running hear on truck so just ride the rails to shop and home. No Oscar bitten you heels?
49:48 headache rack mount is cracking at frame mount R/S The air tank is split primary/secondary as 1 unit on that truck if you look there is a welded seam in the middle shitty design and also there is an internal- non service valve in there also between the tanks
I hope you are not as confused over this as I am ! so you have a blue pto and a red pto and oddly they are not the same and it gets worse after that, and.....?
I didn’t think you were allowed to drill holes in truck frames. Just wondering how you tell the difference between ones you can drill and the ones you can’t.
You need to get some griplock zip ties. They look like regular ties but have silicone type rubber inserts on the inside to provide cushioned grip for no damage to wire looms or anything else they touch. Plus they are premium heat and UV resistant for long life. www.griplockties.com
Warren, I know why you are such a talented and successful mechanic. You know exactly how to hold your mouth 42:28 when you encounter a difficult task. :0) Great video and sound quality. Good camera and microphone choices.
Well Warren, another great video and rain on those folks who don't like the way you do things. There is a big difference in constructive remarks and just plain criticism. It is sad that some of your viewers just criticize. Well anyway RAIN on them.
What i love to read is the comments about what he should do to get the job done ..and the affixation some people have over his dirty coveralls ......smdh !!!
You will have to pardon me if I missed it, I ain't all here today, but is that what you call a "wet kit" that you are putting on or is it something else? Facebook after suspending my account for 30 days or some such has now offered to pay me $25 a week for the 6 weeks leading up to the election to log out of my account and make no posts. Who do you think might be paying for that to happen? Blah, blah blah- all a bunch of b.s. that I try to keep out of the daily lives of people here. Spread positivity where you can, be constructive and inspire others to be that way as well. But sometimes you have to wake people from the slumber that they have been lulled into. Thanks for making videos, they take me from not knowing shit to knowing some shit, maybe not enough shit, but some shit is better than no shit. ;)
What is crazy about California and emissions on vehicles they beat up the people trying to keep this country going but the fires they have every year puts more crap in the air than all the farmers, truck drivers and construction equipment would ever emit, Just my rant over tree hugger crap. I figured you would feel the same even though it makes you money. Thanks for the videos!!!!
Hey Warren look on our RUclips channel we are putting the IN-LINE 71 manual on one section at a time...you can study up and get your schooling in for when you can get over here and help us get our bus going....
Thanks for the video getting ready to install my first wet kit. New to your channel but what ive seen so far is your a hell of a hand. Thanks again bud for the videos.
Hi Warren - great picture quality and sound (finally). Not sure if you noticed, but that Western Star has a cracked crossmember at the frame rail, just back from hydraulic tank installation.
Warren, I was just curious if you will be returning to the close captioning on your videos. Have noticed the last few have not had that feature. It helps sometimes if you are working in difficult conditions or there are viewers whose hearing is less than perfect. Also love the way you treat your animals even when you are working. New equipment is making the site better and better. Thank you for your service on the Boomers.
I had a 2020 Cascadia come in with 50,000 miles with a grinding noise coming from the trans and no 5th gear. I roll under there and find no oil in the trans and it was actually because the PTO adapter plate bolts sheared off and dumped all the oil out of the trans. I built a mounting bracket after I installed the new PTO because I think the weight is what caused the bolts to shear. Reminds me of your situation with the loose bolts. Good thing you caught it in time.
Did anyone else see the nut inside the socket as he was mounting the tank? Would think that was the nut he was missing... sucks you can’t tell him as he’s looking for it. Another great video Warren !
It would be great if you could ship that old truck over to that Pakistani Truck outfit. They could do an entire cab/frame/ drive train refurbishment for about $150 U.S.
Hi like all your videos ,also all the hard work u do I have done some stuff like u but not at all close to what u do , I haven't seen u wear much if any hearing protection all the impact noise and engine diagnostics loosing your hearing. So please wear even the little push in one would be good . I'm not giving u crap I'm just saying it for your long term health. Thank you for the hard work.
Real handy having that crane on your service truck, wonder why no one here uses a setup like that ? Takes a lot of messing about with jacks etc out of the equation, saves the back too 👍.
Why not tie into the seat line then make or have made a small aluminum box to bring that pto switch up and turn it around so,not turn it on by accident with foot
Warren that picture and sound is great....we are getting one now for our videos on RUclips...now get ready to come over and lets get our old bus going....
52:04 what is that noise when you shut the truck off? Noticed the same thing on the Cascaidas that I drove for the two megacarriers I was with, always wondered about them
I just wanted to say that your picture quality is absolutely excellent and the sound is coming out great
Thank you
Great work Warren. You always amaze me with your knowledge of equipment/trucks!
Sounds are great in blending together. The comment volumn is about same as vid sound. Works like a charm because comment doesn't over power the reg vid sound volumn. Good job. Makes it even more of a joy to watch your posted vids. Keep up great work.
Warren you are an inspiration to all of your audience. You are an amazing person and this is evident in every video that you produce. Thank you for allowing all of us to share in all of your projects and the wonderful manner in which you approach all of them. We are all so fortunate to benefit from your skill and incredible attitude toward life as a whole.
Your new camera shows nice and very clear pictures. Sound is great. Good pair. Makes your videos even better.
super nice to be able to hear you Warren the mic works great
It’s nice to have a little help now and then. Nice job 👍
Your trucker customers must love you . Nice job 👍
Nice looking truck ! Good work as usual 👍🏻
Thank ya
And, a Dam good mechanic, great videos.
Mic sound great broader and a studio sound nice detailed picture and your always good with the camera view
enjoyed watching as always Warren take care
Great video as always. The mic and camera is excellent.. Thank you sir👍
That mic sounds great.
Nice and neat good work as always...stay safe from the UK
My experience with plastic zip ties is I don't trust them because over time they will break from the weather. They are OK for certain things but something important I would use metal clamps.
Great video as always. An the picture an sound is awesome.
New mic sounds real good, can clearly hear you talk even with engines and machinery running as well in background :)
Sound is great..... inproved 1000%
The mic is excellent! thanks for the great videos as always
U won't see this in time but some trucks have one long tank for every thing wet, primary,and secondary.
Awesome sound!!!!!
Did you get the Dead Cat windscreen for that mic? Will help when outdoors like onsite in fields. Yes, its called Dead Cat for Rode mic. Anyway, sounds great! Picture looks great! Keep on truckin repair!
It came with the dead cat windscreen.
Did you happen to post vid of the driveline install? Thanks
Super picture, good sound.
The new mic works great Thanks
Look like a lot of fun, as usual. Well done! So know asked before, but are the tracks by your home same as the ones by shop? If are too bad don't have track running hear on truck so just ride the rails to shop and home. No Oscar bitten you heels?
49:48 headache rack mount is cracking at frame mount R/S The air tank is split primary/secondary as 1 unit on that truck if you look there is a welded seam in the middle shitty design and also there is an internal- non service valve in there also between the tanks
I hope you are not as confused over this as I am ! so you have a blue pto and a red pto and oddly they are not the same and it gets worse after that, and.....?
Push connect fittings are nice for assembly but suck to disassemble when they are packed with crap.
good sound !!! like your videos!!
No peace for the wicked 😂
your sound is very good and so is video
hear a Pack Rat eating a wire loom
I didn’t think you were allowed to drill holes in truck frames. Just wondering how you tell the difference between ones you can drill and the ones you can’t.
You can't drill or weld on the flanges (top and bottom plates). Doing so on the web (vertical section) is fine.
You got train tracks at the house and shop ?
New mic is good to go. Job seemed to go your way, despite the 'easy" plans to the contrary.
Rode microphones made in Australia. :)
Gday mate.. Where ya from
Bundy. Rum capital of Australia 🤪
I lived in rocky for 12 months... I went to the spirt of bundy festival... Got me some solera and a banana bottle
Im innthe Hunter valley NSW my self mate....
@@aussieboganbloke2244 Nice. Hunter valley is good wine country from what I've been told.
👍
You need to get some griplock zip ties. They look like regular ties but have silicone type rubber inserts on the inside to provide cushioned grip for no damage to wire looms or anything else they touch. Plus they are premium heat and UV resistant for long life. www.griplockties.com
Looks like someone dotted your eye warren..🤜👁💥
Dirt.
👍👍
hope that fellow hanging around is not the truck owner
Is That a cab or a skip, the amount of trash plastic bottles on the floor, sure shows he doesn’t take care of his equipment 🤬
That mike works good i just herd a mouse fart 60 yards away
LOL
I heard bolts loosening up on the train passing by...
I didnt hear the mouse fart but i heard the ground hog scratching his nuts a mile away ..........
Over here in Northern Ireland we would call a job like that “a pure handlin!” Another great video 👌🏼
Warren, I know why you are such a talented and successful mechanic. You know exactly how to hold your mouth 42:28 when you encounter a difficult task. :0) Great video and sound quality. Good camera and microphone choices.
I can hear all the background noises, planes ,trains and killdeers.lol
Well Warren, another great video and rain on those folks who don't like the way you do things. There is a big difference in constructive remarks and just plain criticism. It is sad that some of your viewers just criticize. Well anyway RAIN on them.
What i love to read is the comments about what he should do to get the job done ..and the affixation some people have over his dirty coveralls ......smdh !!!
Sound and picture a big improvement, well done, I'm in Australia and not in a rural area so I enjoy learning from you about farm equipment, thank you.
You will have to pardon me if I missed it, I ain't all here today, but is that what you call a "wet kit" that you are putting on or is it something else?
Facebook after suspending my account for 30 days or some such has now offered to pay me $25 a week for the 6 weeks leading up to the election to log out of my account and make no posts. Who do you think might be paying for that to happen? Blah, blah blah- all a bunch of b.s. that I try to keep out of the daily lives of people here. Spread positivity where you can, be constructive and inspire others to be that way as well. But sometimes you have to wake people from the slumber that they have been lulled into.
Thanks for making videos, they take me from not knowing shit to knowing some shit, maybe not enough shit, but some shit is better than no shit. ;)
What is crazy about California and emissions on vehicles they beat up the people trying to keep this country going but the fires they have every year puts more crap in the air than all the farmers, truck drivers and construction equipment would ever emit, Just my rant over tree hugger crap. I figured you would feel the same even though it makes you money. Thanks for the videos!!!!
Hey Warren look on our RUclips channel we are putting the IN-LINE 71 manual on one section at a time...you can study up and get your schooling in for when you can get over here and help us get our bus going....
The dent on the fuel tank looks to be part of the bent strap issue
Bent tank came from working in the woods
Now I can hear ya. Thanks Warren 👍
Great sound clarity and video.
Thanks for the video getting ready to install my first wet kit. New to your channel but what ive seen so far is your a hell of a hand. Thanks again bud for the videos.
Hi Warren - great picture quality and sound (finally). Not sure if you noticed, but that Western Star has a cracked crossmember at the frame rail, just back from hydraulic tank installation.
Warren, I was just curious if you will be returning to the close captioning on your videos. Have noticed the last few have not had that feature. It helps sometimes if you are working in difficult conditions or there are viewers whose hearing is less than perfect. Also love the way you treat your animals even when you are working. New equipment is making the site better and better. Thank you for your service on the Boomers.
I had a 2020 Cascadia come in with 50,000 miles with a grinding noise coming from the trans and no 5th gear. I roll under there and find no oil in the trans and it was actually because the PTO adapter plate bolts sheared off and dumped all the oil out of the trans. I built a mounting bracket after I installed the new PTO because I think the weight is what caused the bolts to shear. Reminds me of your situation with the loose bolts. Good thing you caught it in time.
Howdy Warren
Isn't that how it usually works . Still need a few parts . Great work today. Stay safe and keep on turning wrenches. 👍👍👍👌💯
There should be a place to tap air inside the cab. Possibly for the airhorn supply. Don't forget the pressure protection valve.
Like the mic!
That weeping willow in your yard is so freaking cool
was going to say the same thing, and ask if he trims it, on another video it's trimmed perfectly.
Did anyone else see the nut inside the socket as he was mounting the tank? Would think that was the nut he was missing... sucks you can’t tell him as he’s looking for it. Another great video Warren !
Keep up to great work on the videos
Thank you very much.
Another great video! 👍🏻👍🏻
That’s the best video you’ve made for sound and picture quality Warren. That new mic is superb. Thanks
El Duce @ 36:06?
It would be great if you could ship that old truck over to that Pakistani Truck outfit. They could do an entire cab/frame/ drive train refurbishment for about $150 U.S.
Hi like all your videos ,also all the hard work u do I have done some stuff like u but not at all close to what u do , I haven't seen u wear much if any hearing protection all the impact noise and engine diagnostics loosing your hearing. So please wear even the little push in one would be good . I'm not giving u crap I'm just saying it for your long term health. Thank you for the hard work.
Awsome sound and vid Warren! Thanks for what you do. Todd the retired trucker.
Real handy having that crane on your service truck, wonder why no one here uses a setup like that ? Takes a lot of messing about with jacks etc out of the equation, saves the back too 👍.
Sounds much better sir. Thank you for the video. Keep up the great work.
If this coming winter time is like last winter, you will be too busy to fix your own gear..
I’d take a Muncie over a Chelsea any day of the week. Chelsea apparently thinks their shit is made of gold.
Gotta bale hay today but will watch tonight. Thanks for the video
Warren I am learning how to hold my mouth from you, its like the fierceness of a fighting eagle determined to win
Why not tie into the seat line then make or have made a small aluminum box to bring that pto switch up and turn it around so,not turn it on by accident with foot
Sure is nice when you have enough room to access most of the stuff you need to work on.
I like the chelsea pros better because they are made of steel ,the muncie pros are alluminum
Who else wants to contribute to a fund to make Warren's coveralls (fairly) clean again? MWCCA!
Another great video, Warren.
The Ultimate Definition to 'Shade Tree Mechanic'! =)
Did you charge him extra for watching?
How about that a mechanic with a sharp drill bit
Where are you located!??
Great video.
Aircraft
Warren that picture and sound is great....we are getting one now for our videos on RUclips...now get ready to come over and lets get our old bus going....
Happy Labor Day bud ! Hope all is well thanks for sharing 👍
Hey Warren who is the gentleman who is watching you
My renter.
FIFINE 20-Channel UHF Wireless Lavalier Lapel Microphone System with Bodypack Transmitter, Mini XLR Female Lapel Mic and Portable Receive
It’s live from the work place, excellent video and sound, it’s like looking at live tv,great video, thanks man
52:04 what is that noise when you shut the truck off? Noticed the same thing on the Cascaidas that I drove for the two megacarriers I was with, always wondered about them
Excellent picture and sound quality watching in tv 1080 HD
Don't worry so much about camera placement. I'm all good camera shots that isn't in your way.
Mr. warren what mag drill do you have i have run all of them now needing to buy one thanks for your time
You would get bored with same brand n eqipment all the time...
Video and audio now great, even have to turn the volume down on my laptop now. lol
Warren what do you live near ,I noticed a lot of heavy rail action near your house
dang! my sister is a nurse at the hospital in kalamath! small world