HOW To Build A BUDGET Friendly Sleeper For A RAM TRUCK!

Поделиться
HTML-код
  • Опубликовано: 21 фев 2024
  • Hey, y’all ! Welcome to our hotshot channel!
    We are both age 21 trying to follow a dream.
    We’re both new to this industry and business lifestyle , so please be kind is all we ask. We are always open to listening to others opinions and tips! So leave some in the comments down below!
    In this channel we vlog, travel and learn new things on the way, as we both grow! If you’re young and don’t know your path yet, consider trying something new, like trucking!
    If we can do it, you can do it! Ask us questions! Like! Share! And Subscribe!
    Type Of Truck We Drive-
    White 2024 Ram 3500 Crew Cab
    Type Of Trailer We Have-
    Big Tex 35+5 22GN/ CDL Setup
    @Hotshotleevesq
    Measurements of all the items-
    Home Depot-
    -One 4x4 cut into pieces(8 total pieces)
    - Three 9 inch long pieces
    - Two 14.5 inch long pieces
    - One 11.25 inch long piece
    - Two 11.5 inch long pieces
    -Two 1x3
    -One board ( 62 inches in length/ 38 inches in width)
    Materials the bed was made with-
    (Walmart Materials)
    - 3 Inch Foam topper
    - Mattress protector
    - 2 Thick comforters
    - Sheet
    - Pillows

Комментарии • 16

  • @catrinalevesque1358
    @catrinalevesque1358 3 месяца назад +1

    Looks very good. Good job ❤

  • @snackboss101
    @snackboss101 3 месяца назад

    It's similar to the bed I built in my camper van but one thing you have to remember when you put a mattress on wood your body generates heat and moisture then you end up with moldy wood so make sure you air it out frequently to avoid that problem

    • @Hotshotleevesq
      @Hotshotleevesq  3 месяца назад

      That's a great tip! Will definitely do that, thank you.

  • @richrocks1516
    @richrocks1516 3 месяца назад

    A decent cordless impact, like a dewalt, would drive the screws in no problem. It's also a great tool to have on the road, as it's got enough torque to zap a lugnut back on if you're changing out a flat in an emergency.

    • @Hotshotleevesq
      @Hotshotleevesq  3 месяца назад +1

      Will definitely invest in one of those! Thanks.

  • @mikemartinsr5350
    @mikemartinsr5350 2 месяца назад

    Drill holes before trying drive screws in

    • @Hotshotleevesq
      @Hotshotleevesq  2 месяца назад +1

      Good tip, will definitely do that next time, thanks!

  • @dirty16sierra72
    @dirty16sierra72 3 месяца назад

    Any info on grants for new small businesses? I’m an otr flatbed driver and I want to go out on my own and do hotshot

    • @Hotshotleevesq
      @Hotshotleevesq  3 месяца назад

      Hey! We're not really sure about grants, only bc we didnt use grants. For us, we had decent credit to get us a truck to start off with, and we're also starting off leasing on to a bigger company, just to get us up on our feet for now!

  • @Sunny22445
    @Sunny22445 Месяц назад

    What’s the length of the bed?

  • @djhangtime1357
    @djhangtime1357 Месяц назад

    What’s your height?

    • @Hotshotleevesq
      @Hotshotleevesq  Месяц назад

      I’m 5’9 and my girl is 5’3 and we fit pretty comfortably.

    • @djhangtime1357
      @djhangtime1357 Месяц назад

      @@HotshotleevesqI’m 6’2 you think I can fit?

    • @Hotshotleevesq
      @Hotshotleevesq  Месяц назад +1

      Idk for sure, but I do know some other drivers that are 6’0 and they said they fit okay for the most part.