You almost got a dream bike in your hands, she looks great and seems hella fun. It looked like you were flying on there. What ever speed you were going actually looked like you were going it.😉😁
Thanks Johnnie! Now that the ported cylinder is on the bike I'll soon be sending you the stock cylinder, piston, and adapter plates. Still good life left in it (I think).
I’m a new guy n just subscribe, I got 1 coming in the mail anytime now, first build n can’t wait,,luv your channel n going back through watching all your videos,,Thanks man!!
Yes the 1976 yamaha DT100 cylinder head is probably what Ethan and Ryan copied the design from but most definitely the chamber is a direct copy of a Stage 6 cylinder head
@@darcyhemeon4309 Oh yeah, it's not a direct copy at all. Call it "inspired by". The fin size and density is much higher on the Smolik head than the Yamaha design.
@@darcyhemeon4309 It's not a 100% copy though. There are elements Smolik added that the DT doesn't have, and there are things they omitted as well, such as the horizontal winglets between the fins that direct air down through holes in the head to create low and high pressure zones. Hence "inspired"
LA Hover always a good watch your videos , very entertaining !!! I'm looking forward to you leaning out the engine to its potential performance and hold the F .... on ! a comparison between my basic ported performance engine that i sell and the basic ported performance engine Smallik sells would be entertaining if anything
Switching to a B7HS plug should make the engine run cooler, especially thinking as you run a high performance cylinder. I even use B8HS for my 60cc moped as it runs very hot. It is safer running colder than hotter, but it might make it a little bit harder to start.
@@evenbuzzard4642 My motorized bike just has a cheap bicycle frame with stock tires and rims, i have only modified the engine so far, still not enough for the frame or wheels to be a problem.
Build number three under way. 26inch Hyper cruiser stock pk80 cylinder and bottom to start and it is damn clean ports all around. Head has 3cc added to it as I reshaped the dome then full polish and plane and mounted all up. Catalytic converter into 8 port copper glass pack. 32t sprocket coaster mount cnc (had to try one). Triple tree suspension front end heavy CNC riser. Wide set bars. Still waiting on disc brake set. Stock tank. This one will be shall we say somewhat refined compared to my past two grip it n rip it builds.
Entertaining as always my friend. The progression of your builds and your Channel have come a long way. Keep up the great work and thank you. Have you ever weighed your builds just curious?
Thanks a lot for the videos! I watch your videos more than any of the others, just because I feel that you give an honest opinion on whatever it is you're testing, weather you liked it or not.. You have sold me on more products, your videos have, then anything else or anyone else.. Thanks again!
Hey LA.The best way to find an airleak is with carb cleaner.Just spray it on a suspected leak area and when you find the leak the rpm will rise noticeably.
Great video! I've been thinking about pulling the trigger on those wheels. But damn you've sold me! Have you seen DLH 127cc engine pre sale? I've never found forks for bicycles with mounts for dual brakes. Funny how a normal bike can do stoppies on rim brakes, but as soon as you add a motor they're basicly useless.
You haven't seen real power until youve tried a Piaggio!!! Jk great video! Thanks for the review, good or bad I always love the input. Looking forward to your future content!
#1 An air scoop for your cylinder head, to help cool it would be pretty easy to build..... #2 The Gemini wheels look high quality (some oval spoke washers for the rear wheel would help make them even stronger) #3 I'd love a 26in steel, full suspension frame similar to a motoped with those Gemini wheels for a build . #4 After paying $75 for the larger "Nasty Jack" expansion pipe, I wish I would have bought the smaller $45 ex. pipe instead. One $45 pipe I seen did have a smaller header tube ID & belly but much better welds & no kinks or obstructions in the header tube bends for better flow & it's probably also lighter. The other $45 chrome pipes had kinks in header bends & worse welds. The $75 "Nasty Jack" pipe does have a larger header ID (& larger belly) but is all crooked, poor welds, with obstructions inside that won't help flow. Plus it's on the heavy side, I'm gonna have to bend the piss out of it to make it fit & hope it works. VS $45 pipe, that I might also have to bend but would have more clearance around the gas tank. In hindsight, not all the $45 expansion pipes are the same but I really wish I would have bought the black one with good welds & no kinks in the header.
This video is literally coming out at a PERFECT time for me! As I’m currently just looking into different wheel sets for motorized bikes. This is mainly because my current rear wheel has a quick release skewer to mount/ dismount the wheel on the frame. It does have a disc break hub so I was able to make a SOLID sprocket mount with it so I do definitely want to use it on my bike for more reliability than a clamp on adapter or rag joint. However, my main concern is that I literally have just that thin little tiny rod that’s holding all that weight and vibration. This is probably why I haven’t yet seen a single one of your bikes with a quick release but I still would really appreciate your input here. Do you think a quick release is a cause of MAJOR! concern on a motorized bike? or can it be left alone until you figure something else out? I do know it’s definitely not something to use for the long term but for now I’m not too sure what else to do, as I don’t think I can use a thru axle on a quick release wheel nor can I thread a bolt on axle through it as a quick release skewer has a much smaller thickness than a bolt on axle. Other than buying a Gemini wheel I’m not sure what else I could do. Any and all input you have on this would be MUCH! appreciated. Thanks so much!
As far as I'm aware it's not the skewer actually holding the weight- it's just holding it in place and the hollow axle is supporting all the weight You can get a fully threaded solid axle from probably any bike shop, online or even just a different wheel that you don't care too much about(it just has to be completely straight (because bearing adjustment with a bent axle is literally impossible to get perfect) and have good threads, just that you'll need to adjust the cup and cone bearings yourself in each of these cases, which can be a pain
Wow! Puts my bike in the shade. They havent caught on here in the UK. Mostly because we have a fasist government at present. E Bikes, nobody says a word. G Bikes, you have to run the gauntlet every time you ride. Its a great hobby, and as I like to say, 'If it aint bankrupting you, it aint a hobby its a pastime!'
Love your videos man, you inspired me to do my first build ever the other weekend, I got the seeutek motor kit and the install was a learning experience but everything came together nice. Haven’t fired it up yet as I have a steady leak coming from the carb and ran out of spare time, hopefully will get her going this weekend and take my first ride!
Carb leaks are normally caused by a bit of junk in the carb that blocks the fuel valve from closing all the way. A quick cleaning usually does the trick. Sometimes a few taps on the bowl with a screwdriver will get you by. This is assuming the carb is not tilted at an extreme angle.
Another thing if you are having issues with temp and tach you need a resistor plug or ngk resistor cap. You want a colder plug. We recommend an ngk br7hs or br8hs especially when temps get hot out
Amazing video. I love that you did coverage of the gemini wheels, i've had my eye on them for a while. Are you using the zeda 80 bottom end on that motor?
I mainly watched the video for the rims as I think I'd like a set, but you damn near have me sold on the minarelli "I spelled it wrong I know" I bought a 212cc Predator last year sometimes with plans to build a motorized tricycle, but I'm thinking about just slapping it on the phatmoto at this point 🤣
I have some fooker pedals on my normal bike and i love them. They look and feel nice, and they grip really well and are strong. The bearings are also incredibly smooth. They also clone raceface chester pedals
I have Gemini wheels that I am running with a set of Serfas Drifters 26"×2" and they work great and are just over half the price of the hookworms. Also running a 203mm caliper in rear with a QM9 adaptor and can't got much bigger on sprocket but atleast the Minarelli has enough power for the 36t.
Nice. I have both sets of tires, but I haven't run the Sarfas yet. My hookworms are just barely touching the frame on my Trek 820 Antelope (1992). I wish you could share pics in the comment section. I have it on my channel tho. It's a runner for a China D. I'm running a 36 also. I have a 32 on my Mina Chopper.
Want one of these for my CDH Gasbike, which seems to be going through back wheels, damn thing ain't even broke in yet and I'm already on my 2nd wheel...only trouble is the Gasbike's set up for 24" wheels, and I can't seem to get an answer as to whether or not the maker does these in 24"...suppose I could just get the hub, and have a bike shop here lace it up for 24, but that's just added cost...or convert the bike to 26". You had said previously the wheel takes a 300 size tire I think? Pretty sure that's gonna rub the sidewall...maybe get the hub like I said, and have my guy lace up a 24" steel rim for a standard sized tire, and just eat the cost of that...hmm...
Thanks! Bicycle Engines now sells the Phantom 85 top end that can drop onto a yd100 bottom end... But unless they corrected the intake port I don't know if I would trust it. Note: you would probably still need to open up the con-rod for the 12mm wrist pin.
@@LAHover thanks bro I went threw two phantoms but one they sent has a true yd stamped bottom case the other one seems to be the same thing but it's just missing the stamp but I was thinking more down the lines of putting like the MS 460 or 660 one of those on there because I was reading some posts on the phantoms and his dude said he's on his fifth one lol bro I just want to slap a quality piston and jug on it
i got a light setup using a bundle of laptop batteries my nefew made a 12v basically smaller then a fist running 12v lights i havent had to charge them yet and i have had them 2 weeks
@@LAHover While I appreciate your time and energy, doing creative stuff also, (mostly let's plays atm. for lack of gear.) The reason I was asking for a total parts breakdown, is for new builders like me, when I go on amazon, or any other retailer, it's difficult to pour through all the crappy parts to find decent ones. But if I could just copy your build, I at least have a solid foundation. For me, having owned two bikes with the chinadoll motors that spent more time broken than running, I am about to throw in the towel and say all of these things are junk. You seem to have a knack for finding reliable parts. Anyways, just my thoughts, you do great content. Keep it up!
Yeehaw! She looks nice on those Gemini rims man. After she opens up I'm interested in whether 55 mph is possible here. Yd100 is running. Got a MZ65 clone on it now. Sounds good albeit a little loud for town riding. 110 revival, please? I saw a guy put a 090 Stihl on that bottom end. Might be an interesting vid idea.
Sounds like a 125cc and Sweet.Glad you found some awesome wheels for all that power.AFV is for the vids where you just rip the spokes out of a standard rim while punching the throttle,but we'd get a chuckle here too.Rather see you safe though.Thanks for the great info.Happy Trails.
Check out surfas drifters. They are one of tge best tires you can use for tge street. They are made from kevlar and are very strong. No chain clearance issues.
Hey there I have a question do those CDIs that come with the regular 80cc bike kits burn out easily I've bought two bike kits already and there burned out on both of the kits
I hope Darcy doesn't get "upset" over this. Good luck!! Great video! 👍Sometimes you have to see what's best for YOU. All of these set ups have their pros and cons. Also depends if your out for speed, or dependability.
What is thier to get upset about . Great video LA Hover did , did I miss something , it showed all my performances products... performing well. Don't you think , he's has my PowerStorm system , my SAF Super Clutch keeping the power to the wheel and my performances cylinder pulling hard , LA hasn't even fully tried it out . Not even opened up the throttle lol
If we are being honest, you don't take ideas and criticism very humbly. It does seem you are getting better talking about it so, that's good. Competition can and should be friendly. When there's drama in the group, it gets around quick in this small and growing community. You do great work, and know your sh@t, but you don't like to hear any other ways of doing things. Stick to what you do, and stand by it, and make your money. Just like autos, there's lots of options, but it doesn't always have to be a competition. Proof is in the 2-stroke pudding.
@@garylee7774 well when you get personal messages from these guys and thier groupies saying how thier going to run you out of business every chance they get , you kinda get defensive ! I can tell you a few things about DLH Performance is that I always give quick service for products, I'm always available to help you , I give instructional videos to help you achieve your goals, and I'm developing new products to help others . I also stand behind everything I sell making my door open for clients anytime
@@darcyhemeon4309 that's definitely not good. When I had my CB shops, the competition was TOUGH, but I had to realize, arguing with those people only drove customers away. Keep up the good work, keep it honest, ignore the idiots, and people will respect you a lot more. You're doing great stuff. Happiness is is the key to life. We only get one chance at it!
Although I may not be fully convinced that the g2 setup is optimized, I will not deny that Darcy's products (pay for from my own wallet) are strong performers. The work is clean and priced fairly IMO. He has provided helpful information, and been understanding when I make rookie mistakes. When I point out areas I feel could be improved he listens and/or provides feedback. A good example of this is that his clutches now have stronger bucking bars. :) Ride on Builders!
I live somewhat near you, I'd love to contact you in possibly buying or trading for some of your spare parts. I've followed you recently in the last year and have been binge watching your videos in the hopes to motorize my 60s model Schwinn I got from my in-laws.
I'm thinking about getting or making a motorized bicycle. I would do more pedaling than motoring. Do your legs hit the motor or gas tank when you pedal?
Thanks to you mr la hover for your review on the Gemini rims I would be saving to buy a pair at 350.00 .right now I’m watching the economy of my island because I see a few price hike over the past weeks and maybe I would have to help those with less . No worries I specialise in survival 😎. The ported cylinder and head is impressive running that good during braking process you and I know that is twice the speed after braking in is over safe ride on which ever bike you’re riding .i just learn a lot thanks again
I’m pretty sure the point of not letting the cylinder heat up the carb is because the colder the air is, the more dense it is which means u can get more air into the engine. I don’t think it will change much to do with getting colder fuel to prevent overheating. That is definitely an added bonus but the effects of that will be extremely minimal
Hey Quick thought! I'm wondering if you should pop that rear disk brake on the other side of the hub so that oil from the chain won't get on the rotor! That would make the brakes squeak pretty loud.
Minareu makes an insulator thst goes in between the carb and intake if hest is an issue. I guarantee he is not an issue using an insulator and intake leaks are pretty much non existing. You are using a vm18 . What pilot jet are you using?
@@kjsmolik When cold it idles fine, when hot it just dies (I do adjust everything when the motor is hot). I have had good luck finding the right pilots and adjust the air screw on every other bike. but this one always dies. I'll have an update when I replace the bottom end, I honestly think this one is bunk. It's been rebuilt, re sealed, and had many different top end set ups. always the same. Just an unlucky bottom I think.
@@LAHover you are using a vm18. The stock pilot almost never works. We use a 22.5 pilot. Sometimes a 20. Sounds like you need to change the pilot. If it had an air leak when hot it would idle high. When cold it needs more fuel for start hence why it idles ok when cold. Then once it warms up its to rich. Put in a 22.5, af screw out 1.5 turns then go from there.
@@kjsmolik it's back to stock because smaller pilots made it worse. It's weird... Even the pz20 and pz19 that run and idle great on my Southern Custom hybrid do the same thing on this motor.
To clarify… your 3rd person view is awesome. If you would let me know that be awesome. If it’s trade secret. That’s ok too. Very impressed with your films
You should have bought a "PhatMoto Rover" for $999'00 and all you had to do is change the motor 4 a 2 stroke... All the parts are heavy duty built for just that reason to ride on or off road...
Hey Hover, Why does my bike squeel when releasing the clutch during acceleration? I think the noise is coming from the clutch arm and ball bearing not being greased. Thank you, Even
@@LAHover It sounds like metal on metal grinding. I thought it might be the clutch pads but I have replaced them recently. I think it is the push pin barely making contact with the clutch arm when the clutch is partially released and then it goes away when the clutch is fully released because there is no contact between the push pin and clutch arm allowing it to spin freely hence the reason for the ball bearing. Does the ball bearing spin freely when the clutch is engaged or released?
Just wondering why your running that scooter pipe and not the mz, after all you said the mz out performed the torpedo scooter pipe a video or two ago. Just curious.
The Jog seems to cruise allot smoother than the MZ. This pipe was also set up for this bike, and it's a bit cheaper. For my style of riding I'm happy with the Jog :)
10:22 if you have the $$$$$$ to buy all these performance parts, then the difference outside of a dyno situation will not be noticed. Anyone who tells you different is trying to sell you something.
@@speedyjoe7017 prove it. Not me trolling, you I swear, but everyone talks big shit about this part or that part, but my direct experience with 90% of them, they break super quickly and these little 2 strokes end up being broken, WAY longer than they run. I have one that's been broken in my carport for over a year.
I love those rims, reliability is priceless.
Those wheels look super beefy. At first glance, I thought they were old school motorcycle rims with drum brakes! Bike looks like a ton of fun to ride
The invisible sidecar lol
You almost got a dream bike in your hands, she looks great and seems hella fun. It looked like you were flying on there. What ever speed you were going actually looked like you were going it.😉😁
Thanks Johnnie! Now that the ported cylinder is on the bike I'll soon be sending you the stock cylinder, piston, and adapter plates.
Still good life left in it (I think).
@@LAHover o heck yeah I can't wait!. I'm very excited to try it out. Thanks again, I'm definitely looking forward to it.
Looks like it is more fun to build than ride. Good job.
Those rims and head are so beautiful.....great work!!!
,,,,diggin it..........Out on that road you appear to be at a speed of 40 mph......cool..................
I’m a new guy n just subscribe, I got 1 coming in the mail anytime now, first build n can’t wait,,luv your channel n going back through watching all your videos,,Thanks man!!
Thanks! Good luck on the build :)
That Smolik head looks like a beefed up clone of a Yamaha DT100 cylinder head from the 70's. It is a great design.
Yes the 1976 yamaha DT100 cylinder head is probably what Ethan and Ryan copied the design from but most definitely the chamber is a direct copy of a Stage 6 cylinder head
@@darcyhemeon4309 Oh yeah, it's not a direct copy at all. Call it "inspired by". The fin size and density is much higher on the Smolik head than the Yamaha design.
@@OddBallPerformance well you call it inspiring I call it a copied design
@@darcyhemeon4309 It's not a 100% copy though. There are elements Smolik added that the DT doesn't have, and there are things they omitted as well, such as the horizontal winglets between the fins that direct air down through holes in the head to create low and high pressure zones. Hence "inspired"
@@OddBallPerformance maybe not 100% copied but very close to it and if it's 97% copied to me it's well just copied
LA Hover always a good watch your videos , very entertaining !!! I'm looking forward to you leaning out the engine to its potential performance and hold the F .... on ! a comparison between my basic ported performance engine that i sell and the basic ported performance engine Smallik sells would be entertaining if anything
Switching to a B7HS plug should make the engine run cooler, especially thinking as you run a high performance cylinder. I even use B8HS for my 60cc moped as it runs very hot. It is safer running colder than hotter, but it might make it a little bit harder to start.
do you notice any improvement with the hookworm tires? I went with the donna street.
@@evenbuzzard4642 My motorized bike just has a cheap bicycle frame with stock tires and rims, i have only modified the engine so far, still not enough for the frame or wheels to be a problem.
Build number three under way. 26inch Hyper cruiser stock pk80 cylinder and bottom to start and it is damn clean ports all around. Head has 3cc added to it as I reshaped the dome then full polish and plane and mounted all up. Catalytic converter into 8 port copper glass pack. 32t sprocket coaster mount cnc (had to try one). Triple tree suspension front end heavy CNC riser. Wide set bars. Still waiting on disc brake set. Stock tank.
This one will be shall we say somewhat refined compared to my past two grip it n rip it builds.
Sounds like you will be putting in some work! Good luck Builder :)
@tncd6523 I would love to see a video of Your Hyper build! 👍
Nice 👍🏾 😎… hey that’s crazy I just got the 212cc to n phantom 85cc😚great mines think alike lol
Entertaining as always my friend. The progression of your builds and your Channel have come a long way. Keep up the great work and thank you. Have you ever weighed your builds just curious?
Thanks, no I have not bothered to.
You put together a hotrod bike; I like it! Keep up the good work and thanks for sharing, J.
Thanks a lot for the videos! I watch your videos more than any of the others, just because I feel that you give an honest opinion on whatever it is you're testing, weather you liked it or not.. You have sold me on more products, your videos have, then anything else or anyone else.. Thanks again!
14:58 Pure Enjoyment!
Hey LA.The best way to find an airleak is with carb cleaner.Just spray it on a suspected leak area and when you find the leak the rpm will rise noticeably.
Heavily entertained, siked for the next update on this build!!
Great video! I've been thinking about pulling the trigger on those wheels. But damn you've sold me! Have you seen DLH 127cc engine pre sale? I've never found forks for bicycles with mounts for dual brakes. Funny how a normal bike can do stoppies on rim brakes, but as soon as you add a motor they're basicly useless.
That is a really nice looking and purring bike.
You haven't seen real power until youve tried a Piaggio!!! Jk great video!
Thanks for the review, good or bad I always love the input. Looking forward to your future content!
#1 An air scoop for your cylinder head, to help cool it would be pretty easy to build.....
#2 The Gemini wheels look high quality (some oval spoke washers for the rear wheel would help make them even stronger)
#3 I'd love a 26in steel, full suspension frame similar to a motoped with those Gemini wheels for a build .
#4 After paying $75 for the larger "Nasty Jack" expansion pipe, I wish I would have bought the smaller $45 ex. pipe instead. One $45 pipe I seen did have a smaller header tube ID & belly but much better welds & no kinks or obstructions in the header tube bends for better flow & it's probably also lighter. The other $45 chrome pipes had kinks in header bends & worse welds. The $75 "Nasty Jack" pipe does have a larger header ID (& larger belly) but is all crooked, poor welds, with obstructions inside that won't help flow. Plus it's on the heavy side, I'm gonna have to bend the piss out of it to make it fit & hope it works. VS $45 pipe, that I might also have to bend but would have more clearance around the gas tank. In hindsight, not all the $45 expansion pipes are the same but I really wish I would have bought the black one with good welds & no kinks in the header.
This video is literally coming out at a PERFECT time for me! As I’m currently just looking into different wheel sets for motorized bikes. This is mainly because my current rear wheel has a quick release skewer to mount/ dismount the wheel on the frame. It does have a disc break hub so I was able to make a SOLID sprocket mount with it so I do definitely want to use it on my bike for more reliability than a clamp on adapter or rag joint. However, my main concern is that I literally have just that thin little tiny rod that’s holding all that weight and vibration. This is probably why I haven’t yet seen a single one of your bikes with a quick release but I still would really appreciate your input here. Do you think a quick release is a cause of MAJOR! concern on a motorized bike? or can it be left alone until you figure something else out? I do know it’s definitely not something to use for the long term but for now I’m not too sure what else to do, as I don’t think I can use a thru axle on a quick release wheel nor can I thread a bolt on axle through it as a quick release skewer has a much smaller thickness than a bolt on axle. Other than buying a Gemini wheel I’m not sure what else I could do. Any and all input you have on this would be MUCH! appreciated. Thanks so much!
Should be fine for low speed cruising but you can grab a solid axle on eBay or Amazon to replace it with.
Thanks for watching!
As far as I'm aware it's not the skewer actually holding the weight- it's just holding it in place and the hollow axle is supporting all the weight
You can get a fully threaded solid axle from probably any bike shop, online or even just a different wheel that you don't care too much about(it just has to be completely straight (because bearing adjustment with a bent axle is literally impossible to get perfect) and have good threads, just that you'll need to adjust the cup and cone bearings yourself in each of these cases, which can be a pain
Wow! Puts my bike in the shade. They havent caught on here in the UK. Mostly because we have a fasist government at present. E Bikes, nobody says a word. G Bikes, you have to run the gauntlet every time you ride. Its a great hobby, and as I like to say, 'If it aint bankrupting you, it aint a hobby its a pastime!'
Love your videos man, you inspired me to do my first build ever the other weekend, I got the seeutek motor kit and the install was a learning experience but everything came together nice. Haven’t fired it up yet as I have a steady leak coming from the carb and ran out of spare time, hopefully will get her going this weekend and take my first ride!
Carb leaks are normally caused by a bit of junk in the carb that blocks the fuel valve from closing all the way. A quick cleaning usually does the trick. Sometimes a few taps on the bowl with a screwdriver will get you by.
This is assuming the carb is not tilted at an extreme angle.
@@dustinh4175 thanks for the input!
The wheels look better than factory, the whole combination looks nice. Have fun with it
Thanks!
great video as always
Another thing if you are having issues with temp and tach you need a resistor plug or ngk resistor cap. You want a colder plug. We recommend an ngk br7hs or br8hs especially when temps get hot out
Oh, ok thanks! I actually have a box of 8, nice! I completely forgot about picking the right heat range. Glad you caught that.
@@LAHover it's also a resistor plug . It eliminates interference from the ignition to your guage
Amazing video. I love that you did coverage of the gemini wheels, i've had my eye on them for a while. Are you using the zeda 80 bottom end on that motor?
Thanks! Yes firestorm zeda 80 bottom and crank (balanced).
Will soon be replacing it as I suspect it has issues.
I mainly watched the video for the rims as I think I'd like a set, but you damn near have me sold on the minarelli "I spelled it wrong I know"
I bought a 212cc Predator last year sometimes with plans to build a motorized tricycle, but I'm thinking about just slapping it on the phatmoto at this point 🤣
Not that is allot of motor! Good luck if you try it :)
i have been waiting for this video, and the motor looks really powerful almost like a dirt bike motor powerful
Sweet vid as usual,, thanks man
Surfas Drifters for tires.. great wear life and great price.. Kevlar reinforced..
Thanks! you and others have been recommending them, looks like that is what I will go with.
Great video bro love the bike looks great keep up the great work bro
Thanks for watching Evil!
Welcome bro
I have some fooker pedals on my normal bike and i love them. They look and feel nice, and they grip really well and are strong. The bearings are also incredibly smooth.
They also clone raceface chester pedals
The wheels look real nice, aswell as the bike! Keep up your work! Imagine if you put a 44 tooth sprocket back on that bike, wheelie popping machine?
Thanks! And yes it would be 100% lol
Thank You for this very informative video, please keep giving all of us more like this!
Nice build. Looking forward to an updated video.
Why didnt you talk about the wheels? Where did you get them?
I have Gemini wheels that I am running with a set of Serfas Drifters 26"×2" and they work great and are just over half the price of the hookworms. Also running a 203mm caliper in rear with a QM9 adaptor and can't got much bigger on sprocket but atleast the Minarelli has enough power for the 36t.
Nice. I have both sets of tires, but I haven't run the Sarfas yet. My hookworms are just barely touching the frame on my Trek 820 Antelope (1992). I wish you could share pics in the comment section. I have it on my channel tho. It's a runner for a China D. I'm running a 36 also. I have a 32 on my Mina Chopper.
Cool thanks for the info!
I also run the serfas, great tire
Love the new build
id love to see a 28 or 32 tooth on this after some good breakin time and jetting
Want one of these for my CDH Gasbike, which seems to be going through back wheels, damn thing ain't even broke in yet and I'm already on my 2nd wheel...only trouble is the Gasbike's set up for 24" wheels, and I can't seem to get an answer as to whether or not the maker does these in 24"...suppose I could just get the hub, and have a bike shop here lace it up for 24, but that's just added cost...or convert the bike to 26". You had said previously the wheel takes a 300 size tire I think? Pretty sure that's gonna rub the sidewall...maybe get the hub like I said, and have my guy lace up a 24" steel rim for a standard sized tire, and just eat the cost of that...hmm...
Dang. My man is riding with the deuce deuce.
Kings motored bikes have offset engine mounts to give you alot of chain clearance
Gemini Wheels 💯, can't beat them 💯the best
Hove that joint sounds nice bro👍👍 hey do u know of any plug and play 52 or higher jug set up for the yd bottom ends
Thanks! Bicycle Engines now sells the Phantom 85 top end that can drop onto a yd100 bottom end... But unless they corrected the intake port I don't know if I would trust it.
Note: you would probably still need to open up the con-rod for the 12mm wrist pin.
@@LAHover thanks bro I went threw two phantoms but one they sent has a true yd stamped bottom case the other one seems to be the same thing but it's just missing the stamp but I was thinking more down the lines of putting like the MS 460 or 660 one of those on there because I was reading some posts on the phantoms and his dude said he's on his fifth one lol bro I just want to slap a quality piston and jug on it
That is one sweet bike! Did you ever think about doing a 212cc build?
@@TanBoiIndustries yeah ik. I just did one
@@TanBoiIndustries ruclips.net/video/9NXp_e7gb0Y/видео.html
Top hp on a 212, please.
@@leonardarola I hit 42mph so far
@@leonardarola 6.5hp
Hey. I love your vids. Do you remember about how long the O ring in the smolik head lasted for you?
Stock China doll sparkplug replacement is NGK h6 or what..... I know very little but pretty sure my original is comming to its end
Hey bud so I'm get my gemini back rim soon just wondering if you had a video of you putting the gemini rim on step by step
i got a light setup using a bundle of laptop batteries my nefew made a 12v basically smaller then a fist running 12v lights i havent had to charge them yet and i have had them 2 weeks
Fooker pedals r nice for the price 14-25 can't beat it it grips
i wanna build a 50cc 2 stroke bike
@LA Hover could you at some point go over this bike and do a part by part list with links? I'd very much appreciate it.
I did a run down in the video covering most of what is on the bike. Limited by time and energy, but a fair bit of it is in the discription.
@@LAHover While I appreciate your time and energy, doing creative stuff also, (mostly let's plays atm. for lack of gear.) The reason I was asking for a total parts breakdown, is for new builders like me, when I go on amazon, or any other retailer, it's difficult to pour through all the crappy parts to find decent ones. But if I could just copy your build, I at least have a solid foundation. For me, having owned two bikes with the chinadoll motors that spent more time broken than running, I am about to throw in the towel and say all of these things are junk. You seem to have a knack for finding reliable parts. Anyways, just my thoughts, you do great content. Keep it up!
Yeehaw! She looks nice on those Gemini rims man. After she opens up I'm interested in whether 55 mph is possible here. Yd100 is running. Got a MZ65 clone on it now. Sounds good albeit a little loud for town riding. 110 revival, please? I saw a guy put a 090 Stihl on that bottom end. Might be an interesting vid idea.
He got 52 on a china doll, so it's probably possible for 55 haha
Definitely possible, I've hit 55 on my Minarelli and it's same thing but with a Cortez head.
I have the crank for it, just got to make the time. Might try to get it back on the road next month.
No chain tensioner right ? And total inve$ment thanks Ray from North Dallas Tx..
When you first reviewed the Phantom 85, you said that was the most powerful motor you had felt, stock or modified. How does this one compare?
Sounds like a 125cc and Sweet.Glad you found some awesome wheels for all that power.AFV is for the vids where you just rip the spokes out of a standard rim while punching the throttle,but we'd get a chuckle here too.Rather see you safe though.Thanks for the great info.Happy Trails.
Lol thanks builder :)
Hi my friend. How much is this one gonna cost me? Bwwwahhhaa! That is a beautiful bike .Any chain stretch?
Slacking the clutch spring but no watch not and no wash bolts ok 👍.
Do you have any bulids selling..ill check Smolik to see if he has. Looking for something similar to this maybe
Check out surfas drifters. They are one of tge best tires you can use for tge street. They are made from kevlar and are very strong. No chain clearance issues.
Sweet! Thanks again for the recommendation.
Beautiful quality wheels 😮🤟🙏🤠
What is the link to this discord server? Is it still active? Even if its not I would love to be able to search through for answers.
I love your bike but mine keeps overheating i have a stock 80/66 cc idk what head i can buy i cant find any in the nederlands
Nice!!
Hey there I have a question do those CDIs that come with the regular 80cc bike kits burn out easily I've bought two bike kits already and there burned out on both of the kits
You haven't had power, till you hop on a running motorized bicycle. 👍
And tight lock the clutches bolts them,ok?
I would like to see an update on the phantom 85.
The Zeda Dawn is on its way to my house for the p85 :)
That set up u have l.a is bad ass sounds amazing
I hope Darcy doesn't get "upset" over this. Good luck!! Great video! 👍Sometimes you have to see what's best for YOU. All of these set ups have their pros and cons. Also depends if your out for speed, or dependability.
What is thier to get upset about . Great video LA Hover did , did I miss something , it showed all my performances products... performing well. Don't you think , he's has my PowerStorm system , my SAF Super Clutch keeping the power to the wheel and my performances cylinder pulling hard , LA hasn't even fully tried it out . Not even opened up the throttle lol
If we are being honest, you don't take ideas and criticism very humbly. It does seem you are getting better talking about it so, that's good. Competition can and should be friendly. When there's drama in the group, it gets around quick in this small and growing community. You do great work, and know your sh@t, but you don't like to hear any other ways of doing things. Stick to what you do, and stand by it, and make your money. Just like autos, there's lots of options, but it doesn't always have to be a competition. Proof is in the 2-stroke pudding.
@@garylee7774 well when you get personal messages from these guys and thier groupies saying how thier going to run you out of business every chance they get , you kinda get defensive ! I can tell you a few things about DLH Performance is that I always give quick service for products, I'm always available to help you , I give instructional videos to help you achieve your goals, and I'm developing new products to help others . I also stand behind everything I sell making my door open for clients anytime
@@darcyhemeon4309 that's definitely not good. When I had my CB shops, the competition was TOUGH, but I had to realize, arguing with those people only drove customers away. Keep up the good work, keep it honest, ignore the idiots, and people will respect you a lot more. You're doing great stuff. Happiness is is the key to life. We only get one chance at it!
Although I may not be fully convinced that the g2 setup is optimized, I will not deny that Darcy's products (pay for from my own wallet) are strong performers.
The work is clean and priced fairly IMO.
He has provided helpful information, and been understanding when I make rookie mistakes.
When I point out areas I feel could be improved he listens and/or provides feedback. A good example of this is that his clutches now have stronger bucking bars. :)
Ride on Builders!
Can you put gein wheel on bike with more than one gear
Were you get the motor from I need one that’s fast
I live somewhat near you, I'd love to contact you in possibly buying or trading for some of your spare parts. I've followed you recently in the last year and have been binge watching your videos in the hopes to motorize my 60s model Schwinn I got from my in-laws.
What tires did you end up going with for the Gemini wheels?
I'm thinking about getting or making a motorized bicycle. I would do more pedaling than motoring. Do your legs hit the motor or gas tank when you pedal?
No, they are well out of the way.
Unless you get a 4 stroke...
Thanks to you mr la hover for your review on the Gemini rims I would be saving to buy a pair at 350.00 .right now I’m watching the economy of my island because I see a few price hike over the past weeks and maybe I would have to help those with less . No worries I specialise in survival 😎. The ported cylinder and head is impressive running that good during braking process you and I know that is twice the speed after braking in is over safe ride on which ever bike you’re riding .i just learn a lot thanks again
Thanks for the feedback builder :)
can i ask what this entire setup has cost you
Where you get the handlebars for your bike I got the same fork from the zero gas tank frame and I'm looking for handlebars
These ones are a stock set of Huffy Cranbrook handlebars that I cut in half.
I’m pretty sure the point of not letting the cylinder heat up the carb is because the colder the air is, the more dense it is which means u can get more air into the engine. I don’t think it will change much to do with getting colder fuel to prevent overheating. That is definitely an added bonus but the effects of that will be extremely minimal
Thanks for the feedback :)
We’re can I get the Gemini rims
Hey Quick thought! I'm wondering if you should pop that rear disk brake on the other side of the hub so that oil from the chain won't get on the rotor! That would make the brakes squeak pretty loud.
No set up for it with these wheels but it is a good idea. It's nearly impossible to prevent the pads from getting contaminated on the drive side.
@@LAHover gotcha! That makes sense!
?hav u herd about a RDM Products
A hub on a wheel with speeds?
Minareu makes an insulator thst goes in between the carb and intake if hest is an issue. I guarantee he is not an issue using an insulator and intake leaks are pretty much non existing. You are using a vm18 . What pilot jet are you using?
If my memory is right it's the stock pilot atm.
@@LAHover is it a high idle issue or it just dies
@@kjsmolik When cold it idles fine, when hot it just dies (I do adjust everything when the motor is hot). I have had good luck finding the right pilots and adjust the air screw on every other bike. but this one always dies. I'll have an update when I replace the bottom end, I honestly think this one is bunk. It's been rebuilt, re sealed, and had many different top end set ups. always the same. Just an unlucky bottom I think.
@@LAHover you are using a vm18. The stock pilot almost never works. We use a 22.5 pilot. Sometimes a 20. Sounds like you need to change the pilot. If it had an air leak when hot it would idle high. When cold it needs more fuel for start hence why it idles ok when cold. Then once it warms up its to rich. Put in a 22.5, af screw out 1.5 turns then go from there.
@@kjsmolik it's back to stock because smaller pilots made it worse. It's weird... Even the pz20 and pz19 that run and idle great on my Southern Custom hybrid do the same thing on this motor.
How did you capture that footage? First 5 mins in? A guy needs to know
To clarify… your 3rd person view is awesome. If you would let me know that be awesome. If it’s trade secret. That’s ok too. Very impressed with your films
You should have bought a "PhatMoto Rover" for $999'00 and all you had to do is change the motor 4 a 2 stroke... All the parts are heavy duty built for just that reason to ride on or off road...
lol alot of drama in the comments lmao Stir up that POT love the build black and blue stay true
What exhaust is that?
Hey Hover,
Why does my bike squeel when releasing the clutch during acceleration? I think the noise is coming from the clutch arm and ball bearing not being greased.
Thank you,
Even
Without hearing it I can't say for sure. But if it goes away after your bike reaches speed it is likely just low quality clutch pads.
@@LAHover It sounds like metal on metal grinding. I thought it might be the clutch pads but I have replaced them recently. I think it is the push pin barely making contact with the clutch arm when the clutch is partially released and then it goes away when the clutch is fully released because there is no contact between the push pin and clutch arm allowing it to spin freely hence the reason for the ball bearing. Does the ball bearing spin freely when the clutch is engaged or released?
@@LAHover chain was hitting the frame.
Just wondering why your running that scooter pipe and not the mz, after all you said the mz out performed the torpedo scooter pipe a video or two ago. Just curious.
The Jog seems to cruise allot smoother than the MZ. This pipe was also set up for this bike, and it's a bit cheaper.
For my style of riding I'm happy with the Jog :)
@@LAHover ok... smooth is always king, power is not
As important as comfort, imagine that! Very cool thank you Hover.
Maybe I missed it, but what was the top speed?
What is the size of that wheel ? Very nice awesome!
26", rim is 1.75" wide
What's the RPM on this engine
No thoughts of ever messing with a trike?
Sadly no. If my city had bike lanes maybe.
its the g2 reed it needs port mached
10:22 if you have the $$$$$$ to buy all these performance parts, then the difference outside of a dyno situation will not be noticed. Anyone who tells you different is trying to sell you something.
False big time very much different all the way around you get what you pay for
@@speedyjoe7017 prove it. Not me trolling, you I swear, but everyone talks big shit about this part or that part, but my direct experience with 90% of them, they break super quickly and these little 2 strokes end up being broken, WAY longer than they run. I have one that's been broken in my carport for over a year.
Dude knows... But if you had the money, wouldn't you try it too?!
@@leonardarola for sure! That's not the point I was making.
I like at 1:46 when the wheel goes from spinning backwards to forwards.
Lol, magic!