SolidWorks Exercises for Beginners - 4 | SolidWorks Part Modeling Practice Tutorial

SolidWorks Exercises for Beginners - 4 | SolidWorks Part Modeling Practice Tutorial. This tutorial shows how to create 3D part in SolidWorks part modeling environment step by step from scratch. SolidWorks Commands used in this tutorial are: centerline, line, circle, extrude boss/base, extrude cut, mirror, symmetry. Topics covered in this tutorial are:
SolidWorks tutorial mechanical parts
Solidworks tutorial for mechanical engineering
#CADCAMTutorials #CADCAMSolidWorks #CADCAMMechanical
#SolidWorksTutorial #SolidWorksVideoLecture
#SolidWorksAdvanced #SolidWorks #CADCAM3D #CADTutorials #SolidWorksBasics

[@jimdeveau4025]

Thanks... Been wanting to learn how to use SolidWorks for a while. You're the man!... 🙂

[@aadilmalik8306]

You explains in simple way.
Thank you sir.

[@MohammadAliAzar]

I really enjoy your video.
Thanks a lot

[@aadilmalik8306]

Thank you so much sir.

[@mrraghan73]

yes i did .Thanks..

[@bryanparejaramirez9269]

genial , se entiende en todos los idiomas :)

[@gamingmaster3239]

sir thanks for best expalination , i have completed course but not able to drow but afte seen ur vidoes i lerarnt it thank you god bless u sir

[@CADCAMTutorials]

You're welcome 😊

[@ap-ln3ei]

Hi, it would we very helpful if you have attached pdf for these drawings ( just 2d sketch ).

[@yogeshpatel3032]

Sir I really appreciate of your teaching style

[@CADCAMTutorials]

Thank you 😊

[@nareshbanerji]

great sir
i m new on your chanel

[@billymuchesia9649]

checkout the height of 50. I think its not right to use 50 instead, we are to use 50-15=35. 50 is from top to start of circle.

[@slautotube1065]

❤️

[@deeprajyaguru1913]

Why I keep getting the rebuild error messages.

[@manhngo4275]

It is expensive for a student like me to buy Solidwork, even I know this is very useful tool.

[@Noobgamer-bo1ot]

u can use crack version free of cost

[@aadilmalik8306]

@@Noobgamer-bo1ot yes bro , near about every student uses the crack versions of modeling softwares.
Me too using crack veesion.
Free of cost.

[@avinashdubey4628]

Why you converted little portion of the circle to an arc? I want to know the reason behind it.

[@prakesh2904]

i think its to be able to fit the rectangle on to the circle. The circle was part of a different sketch, so to bring it into the one he was working on, he had to convert it to an arc.

[@udayjoshi0296]

Sir, why used convert entity in circle? Please explain, in 1st part.

[@betterbutter5935]

What is the function of convert entities at 5:00

[@danielteyehuago1633]

Please do you have a video on how to use or give dimensions in AutoCAD 3D...

[@CADCAMTutorials]

ruclips.net/video/zSwGlXyi4fI/видео.html

[@danielteyehuago1633]

@@CADCAMTutorials Please thanks for the quick response... God bless you. From Ghana

[@danielteyehuago1633]

@@CADCAMTutorials Please have start the building plan

[@vatsalparikh633]

Sir taught Convert Entities Here

[@siddharth4662]

at 10:02 the Arc of R40 which you creates is giving me error saying "Cannot Dimension Between An Arc And It's Center Point"

[@CADCAMTutorials]

Click only on arc. Don't click on the center point.

[@gamesqueen2637]

What is the name of the first design?

[@DEVISINGH-iu3by]

Is this 4th lecture also performed in the same software as in 1-3 lectures? Please reply

[@CADCAMTutorials]

Here is the complete playlist in proper squence
SolidWorks Tutorial for Beginners: ruclips.net/p/PLrOFa8sDv6jcp8E3ayUFZ4iNI8uuPjXHe

[@pinnathamrongthanyawong9711]

Could you please tell me the name of the second object and what it use for?

[@sandeepchintha1288]

direct application of that is in borewell drilling...it is used as a link between drillbit and pipes....if u see how it is working you will understand for yourself

[@DAMMARODAM111]

knucke joint

[@ganeshkl3271]

i am not able to convert circle into arc.. please help me

[@choydeliverer7162]

me too

[@thebrownmamba7707]

3:53 Sir why I cant drag it down. stopped right here

[@AwakeningAnimations]

Make sure you are still in sketch then click on the line and finally click and hold while pulling it down. Because of the relationship it will move down straight

[@nikkyhtown496]

need help creating a part please

[@sachinnn1251]

I can help

[@yamrajoli3834]

sir eh 34 vedio hamareliy enough hai kya ?

[@CADCAMTutorials]

Yes.

[@badhonbarua9808]

Sir, how do I download solidworks

[@vpavankumar8684]

Sir which version are you using (solidworks)

[@CADCAMTutorials]

2012

[@vpavankumar8684]

@@CADCAMTutorials .....ok sir thank you..

[@kamleshkushwaha3367]

7