i just got ktag as well, just came in the mail yesterday lol. i got it to do med17 and edc17 immo off.. using the test clip is still the easiest for me7, med9 ,edc15/16 in my opinion but this is another way
I'm having some issues getting eeprom to work. I downloaded the github file but when i open the exe it doesn't create a directory--do i need to do that manually?
I have k tag and use it well but I cannot find the software that you were able to use to change code on the eprom that you read with ktag? Can you help or if I send you the file can you shut immo off and send it back ?
All I have is an mpps v16, tricore and a kkl cable. I want to be able to immo off for flash tuning of spare ecus for learning purposes. Would a Ktag and bdm frame be my best, also cheapest solution lol. Thanks for sharing your experience in these videos.
@@ERAutomotive I just bought ktag, bdm frame with Bosch pcb connectors. I will be dealing with me7.5 as well as edc16u31 hence asking about the frame, I’m not trying to brick ecus as I’m a beginner which is why I’ve quickly chose to switch from Mpps flash to ktag. I’d rather put in the prep work for a better, more reliable result. Thanks for the quick reply
@@ERAutomotive also as to another one of your videos, can I check tdi timing, adjust IQ on vcds lite with my clone kkl cable? Supposed to help a friend out just wanting to make sure I have the right software/cable
Love you videos bro learn alot from them I got a edc16 been trying to remove immo I have ktag but not the bdm plate and kess and car prog and mpps could you do a video on edc16 or help me please lol dad put a 1.9tdi bls engine in his 2.0sdi caddy need to remove immo for ecu to work, or would it be possible to write a 1.9tdi file to a 2.0 sdi ecu?
Dude your amazing and learning so much from you. Is this turning off your EGR? Also I noticed you said that’s a cheaper Ross tech cable. Can you feel me in the cheapest way to Ross tech VCDS?
This is removing the immobilizer so u can plug the ecu into any 1.8t car It’s the blue kkl cable u can get from eBay or Amazon for cheap and then u use vcds lite with it Doesn’t have all the features but does some very useful stuff Or u can buy a lite version from them that does a little more
@@ERAutomotive Thanks for the info. I just bought that OBDELEVEN pro for android/IOS however doesn’t seem like it works like it does on iOS like originally suited android. Thinking about returning it as I don’t want to buy android anything for better operation… Think Im going return it and apply it to vcds.
Hi thanks for the videos the are very helpful, i have done a couple ME 7.5 ecus but when i try to do ME 7.1.1 i get a error using ept tool any idea how to get it to decode that EEPROM file? maybe a command line is different for that ecu?
Yes u can buy I use carprog But there is lots of other options www.amazon.ca/SOIC8-EEPROM-CH341A-Programmer-Module/dp/B07LH72MR5 That’s just an example I don’t have that one Just so u get the idea of what I mean
@@ERAutomotive okay thanks! could i get your email for some further questions? im looking for the right software to use to read the eeprom file with a clip on reader.
@@ERAutomotive tried this also tried powering the ecu without pin 3 with pin 24 grounded then connected pin 3 while grounding 24, removing ground from 24 and still nothing,
Nice day. I made immo off a jetta mk5 2008. To start the car that I have to disconnect in the instrument panel, in the ECu or in another module?. Please my jetta won't start.
i just got ktag as well, just came in the mail yesterday lol. i got it to do med17 and edc17 immo off.. using the test clip is still the easiest for me7, med9 ,edc15/16 in my opinion but this is another way
working perfectly in ME 7.1
worked, had to mess about with the c: directory but it worked. thank you.
how did you fix it?
I'm having some issues getting eeprom to work. I downloaded the github file but when i open the exe it doesn't create a directory--do i need to do that manually?
hello ,when I give the command the programme window closes immediately
I have k tag and use it well but I cannot find the software that you were able to use to change code on the eprom that you read with ktag? Can you help or if I send you the file can you shut immo off and send it back ?
Hello
Great video.
Can you tell me the size of the 4x t15 cover bolts?
Thank you for the help.
Great video I a newbie and have done a few hope you do more
Can we just put in vcds new value 1 and save it?
Unfortunately not
Thanks for the help do you have a vid on how and what you used to make the obd2 connection if you don’t mind
I just googled
Obd2 pinout
And
Me7 pinout
And make connections
I got the connectors from scrap vehicles
@@ERAutomotive perfect thank you
All I have is an mpps v16, tricore and a kkl cable. I want to be able to immo off for flash tuning of spare ecus for learning purposes. Would a Ktag and bdm frame be my best, also cheapest solution lol. Thanks for sharing your experience in these videos.
It can be done
With kll but not reliable
I’d suggest Ktag and u don’t need a frame for me7
@@ERAutomotive I just bought ktag, bdm frame with Bosch pcb connectors. I will be dealing with me7.5 as well as edc16u31 hence asking about the frame, I’m not trying to brick ecus as I’m a beginner which is why I’ve quickly chose to switch from Mpps flash to ktag. I’d rather put in the prep work for a better, more reliable result. Thanks for the quick reply
Good idea
Ktag will serve you well for those ecu
With ability to recover if needed
@@ERAutomotive also as to another one of your videos, can I check tdi timing, adjust IQ on vcds lite with my clone kkl cable? Supposed to help a friend out just wanting to make sure I have the right software/cable
I don’t believe lite can do that
Unless it’s the full activated lite version
That's awesome! I need to EGR off on my '01 Jetta ALH 5-speed. I saw your programming vid. Does ECU need to be taken apart similar to this ECU?
Hey no alh can be done in car through obd
Hi have you got a link for ktag theres loads on ali express but not sure which too go for
The newest red pcb is what I got
Yes looks like it
Will just need Ksuite 2.25 for it to work
Love you videos bro learn alot from them
I got a edc16 been trying to remove immo I have ktag but not the bdm plate and kess and car prog and mpps could you do a video on edc16 or help me please lol dad put a 1.9tdi bls engine in his 2.0sdi caddy need to remove immo for ecu to work, or would it be possible to write a 1.9tdi file to a 2.0 sdi ecu?
Hey thanks for the kind words
U will need to get the bdm plate
I’ll try to make a video tomorrow on doing it
Hola! Utilizas otro programa aparte del ktag?
Very good video but I couldn't understand how you made the inmo off. What software did you use? Is too fast 😪
Thank you!
The software can be found on
Nefmoto.com
It was developed on that forum and is available for free
Hello! Do i have to ground booth points or just one point? Only The yellow one for exempel
Are you using Ktag? And me7.5 or me7.1.1?
Are you using Ktag? And me7.5 or me7.1.1?
Hello again! I finally get it to work! Thx for this video 😍
Excellent!
Dude your amazing and learning so much from you. Is this turning off your EGR? Also I noticed you said that’s a cheaper Ross tech cable. Can you feel me in the cheapest way to Ross tech VCDS?
This is removing the immobilizer so u can plug the ecu into any 1.8t car
It’s the blue kkl cable u can get from eBay or Amazon for cheap and then u use vcds lite with it
Doesn’t have all the features but does some very useful stuff
Or u can buy a lite version from them that does a little more
@@ERAutomotive so would you say half the features of vcds?
Depends if u pay for lite activation or not
@@ERAutomotive Thanks for the info. I just bought that OBDELEVEN pro for android/IOS however doesn’t seem like it works like it does on iOS like originally suited android. Thinking about returning it as I don’t want to buy android anything for better operation… Think Im going return it and apply it to vcds.
Vcds is definitely better IMO
Hi thanks for the videos the are very helpful, i have done a couple ME 7.5 ecus but when i try to do ME 7.1.1 i get a error using ept tool any idea how to get it to decode that EEPROM file? maybe a command line is different for that ecu?
Some me7.1.1 don’t read the eeprom
If u look at the file in a hex editor it will be all FF
What I do for those is just a clip on reader for those
@@ERAutomotive clip on reader? can you explain further is this something i can buy?
Yes u can buy
I use carprog
But there is lots of other options
www.amazon.ca/SOIC8-EEPROM-CH341A-Programmer-Module/dp/B07LH72MR5
That’s just an example
I don’t have that one
Just so u get the idea of what I mean
@@ERAutomotive okay thanks! could i get your email for some further questions? im looking for the right software to use to read the eeprom file with a clip on reader.
erauto.vw@gmail.com
Have you found that clone to be stable? If so, which supplier did you get it from?
I haven’t had any issues
I got it from alliexpress
I’ve only used on older ecus tho
do you sell that cable that connects to the ECU?
I don’t
In video
It’s a cheap kkl cable from eBay or Amazon
Or u can use Ktag
Got a flashing IMO yellow light will this get rid of that also?
Cluster hold immo data as well
This just makes ecu plug and play
For swaps or ecu replacement
I just open cluster and break the bulb
Lol I hear that, needed another key programmed. Took it to lock smith then this started. Smh
Oh dam
@@ERAutomotive don't need break bulb , you need to match a key with the cluster
If u can program key y not just program key from the start and not need immo off on ecu ??@Rudi Giraud
Cant wait to get my equipment in so i can get this beetle back in service
Does this require going into the hex data?
The software does the required changes for you.
But yes technically it does
Great video, thx
Would I be able to do this with mpps v18?
Yes I believe so
Go in generic and the option is there
I seem to be having trouble getting the ecu into boot mode? Any tips
Connect boot pin power on count
To 10 remove boot pin
@@ERAutomotive tried this also tried powering the ecu without pin 3 with pin 24 grounded then connected pin 3 while grounding 24, removing ground from 24 and still nothing,
The boot pin is inside the ecu
Have to open it and touch the pin inside on the board
Nice day. I made immo off a jetta mk5 2008. To start the car that I have to disconnect in the instrument panel, in the ECu or in another module?. Please my jetta won't start.
Immo off ecu and will start with just
Ecu
How much do you charge to do this.
Can u contact me on Instagram
@eruatomotive_
Or email me
erauto.vw@gmail.com
Thank you!
Helo sir can you help me
Please give you
Whatsapp number
You can email me at
erauto.vw@gmail.com
That's really cool stuff, have you tried this on a edc16u34? In BDM?! Greetz
Yes I have a video on immo off for edc16
I’ve only done it on the vag ecu tho
@@ERAutomotive oh nice, thank you I'll be watching there