great video...but. On all hardware, the lock washer goes on first, then the flat washer. the flat washer should always go against the surface. The lock washer works a a spring force between the flat washer and bolt head or nut.
Terrific video! Followed your step by step instructions for a Black Ops 4500 winch on a 2019 XP 4 1000 Turbo. Installing the bolts on the mounting plate and winch took some patients, but I knew what to anticipate as you described during your installation comments. I ordered the mounting plate for my model and everything worked perfect including the rocker switch in the factory slot.
Great Video, helped a lot. Installed mine on a 2019 XP 1000 Dynamix, was basically the same install, just had to go around a lot more wiring with my Command Ride. Also did not mess with the front diff line or brake line, easily worked around it.
Loved the video, helped a lot. Only thing is i don’t know about that ground wire hooked up to that little ground post, since tgeres ample wire wouldn’t it be better to run it directly to the battery?
Thanks for watching our Black Ops winch install! Each machine is different and may require you to remove more or less of what is shown in the video. This video is a general install for the winch itself.
I have a 900s and my solenoid in my kit looks like that. Biggest pain in the a** I've ever seen. 1 of the battery lugs make it impossible to get a screwdriver on the screw head if youre using machine screws and nuts! And to put a screw or bolt in from the underside it better be the right length or you can't get the nut on ! If i hadn't cut my battery cables to length already i would return my kit.
It depends on your exact machine and which style switch you have. Give us a call or send us an email for assistance with install: 855.743.3427 or sales@superatv.com
great video...but. On all hardware, the lock washer goes on first, then the flat washer. the flat washer should always go against the surface. The lock washer works a a spring force between the flat washer and bolt head or nut.
Terrific video! Followed your step by step instructions for a Black Ops 4500 winch on a 2019 XP 4 1000 Turbo. Installing the bolts on the mounting plate and winch took some patients, but I knew what to anticipate as you described during your installation comments. I ordered the mounting plate for my model and everything worked perfect including the rocker switch in the factory slot.
Glad we could help! Thanks for the feedback!
Great Video, helped a lot. Installed mine on a 2019 XP 1000 Dynamix, was basically the same install, just had to go around a lot more wiring with my Command Ride. Also did not mess with the front diff line or brake line, easily worked around it.
Very well done video. Thank you
Thanks so much for the feedback!
This would be great it you would show how to change the atv switch to a sxs momentary 7pin switch.......
Loved the video, helped a lot. Only thing is i don’t know about that ground wire hooked up to that little ground post, since tgeres ample wire wouldn’t it be better to run it directly to the battery?
Excellent video
Thank you for the feedback! Glad we could help!
I was able to do the install without dropping the tires and shock.
Thanks for watching our Black Ops winch install! Each machine is different and may require you to remove more or less of what is shown in the video. This video is a general install for the winch itself.
HEADS UP: ROCKER SWITCH PROVIDED WITH THE KIT DOES NOT FIT OEM ROCKER SWITCH SLOTS FOR RZR XP TURBO MODEL SHOWN IN VIDEO
How is this remedied?
Just ran into this problem kinda a bummer
@@CrumbScum ya man dumb
@@CrumbScum lol here we are the down votes section
@@patkennedy7333 what do you do to run the switch?
Was wonder why is there no fuse on the red wire close to buss bar
Good video thanks
I have a 900s and my solenoid in my kit looks like that. Biggest pain in the a** I've ever seen. 1 of the battery lugs make it impossible to get a screwdriver on the screw head if youre using machine screws and nuts! And to put a screw or bolt in from the underside it better be the right length or you can't get the nut on ! If i hadn't cut my battery cables to length already i would return my kit.
why does the plate I got in my 4500 box not look anything like that plate?
You need the vehicle specific mounting kit.
Will the ultimate 50" trail accept a warn winch from another machine?
Very good video t.y
What gauge is the red, black, yellow and blue wire?
How did you install the switch? Won’t fit my factory cutout?
It depends on your exact machine and which style switch you have. Give us a call or send us an email for assistance with install: 855.743.3427 or sales@superatv.com
@@SuperATVMedia 2023 rzr xp 1000
One extra terminal lug would've been nice for dummies like me
🏆🏆🏆🤗🙏