Making a Bike Roller using old hubs
HTML-код
- Опубликовано: 27 авг 2024
- Low cost bike roller using old mountain bike hubs.
Track:
NCS Spotify: spoti.fi/NCS
Free Download / Stream: ncs.io/symbolism
▽ Connect with NCS
Facebook / nocopyrightsounds
Twitch / nocopyrightsounds
Twitter / ncsounds
Spotify spoti.fi/NCS
SoundCloud / nocopyrightsounds
Goo+ google.com/+noc...
Instagram / nocopyrightsounds_
Electro-Light
➞ Facebook / electrolight. .
➞ SoundCloud / maskedacoustic
➞ Twitter / electrolightedm
➞ RUclips / electrol. .
Excellent design. Thanks for sharing. Best one I've seen yet. Except I think you can get away with not connecting the rollers to the the part that holds the forks. So long at the roller part does not slide, if should stay in place once it is lined up.
Does it have resistance
Naalala ko dati nung nagppahasa kmi ng kutsilyo sa naka bike. 😅 Hahaha ang tanda ko na pala
this system can't be used for cadence drills and pedalling technique. however it xan be used for power training, just add flywheel and resistance.
Why not?
Astig.. sir.. good job..po
Medyo tunog lang nag hahasa ng itak
Defective po kasi yung isang hub sir kaya maingay.. Hehe.. Pero pag parehong ok yung hub sure na tahimik lang po.
@@Kulikutz salamat lods ma try kunga gagana siguro khit lumanag chinese hubs
@@dinogarbida3294 yes gagana esp sa RB..kasi manipis lang yan..
Very good idea and it is very good technique
Keren pisan..👍🏿👍🏿👍🏿
The front part is unnecessary. Just get something to make the bike is not wobbling.
Very clever....
Nice one idol good job
Gampang di tiru...👍
Napakaangas🔥rs always.
nice one idol.. thankyou sa vid.
bright idea sir hahaha
Thank u bro!
All you need to do is add a flywheel for continuity and added resistance.
Thanks.
watching bro
thanks sir. ganda din po ng mga vids mo..
Ayus yan idol.. 🤘🤘🤘
Thanks po
step by step sana lodi
Procedure po
hi bro, what kind of hubs u used ?
Whats the exact size between the hubs?
8inches in between two hubs
.
parang hindi kalalakas dito sir kasi walang laman ang sipa, prq mailarawan ko pra kang nasa lusong pero halos wala kna maipedal, parang ganyan ang feeling sa nakita ko habang pumipedal ka sa video
kasi ginagamit nya yun malaking cogs sa likod?? duh? May ganyan ako.
@@gabriel6195 keep it up sir, sana lumakas ka
@@tadejpogacar5637 Already i am.
hello nice system. How can we reduce the sound
one of the hub has a misalign ball bearing housing causing that loud noise but the other one is silent.
Ride safe po ka biker!Sending support from #"Bikers x Engineers in SG
Thanks sir, i hope kilala nyo din po si bike session jan sa SG,pa regards nalang po.. Ride safe po always.
Ask ko lng po if ano po mas maganda gamiting electrode?
6013 gamit ko para mas madaling sumindi kahit mababa ang amperage
😎👍❤
pwede po ba kapag fixie ang ginamit na bike at fixed gear hub din ang gagamitin para dito?
Pwede din naman.. Mejo maliit nga lang at stressfull sa gulong mo..
Barulhento 😮
Ano po title ng song kuya? Parang ang realxing pag nasa ride ka
di ko maalala title pero try ko hanapin sa playlist ko kung andun pa.
@@Kulikutz sige po
Ito na po sir.. Hehe.. ruclips.net/video/__CRWE-L45k/видео.html
Got it for a shorter kid and his bike was too small for it
Pwede po ba yan sa mtb?
yes po..na try ko sya sa 2.10 na gulong ok naman po.
But my whole bike is moving,so my tire in rear is sticking to the side of the hub.
Depends to the wheel if mtb use 1.95 tire
kaysa pobang gulong ng mtb po?
Kasya naman po basta 2.25 pababa lang.
@@Kulikutz anong hubs yan po lods nong akin kasi stock hubs lng dn yon sa bike ko kaso di mag kaysa huhuhuhu 27.5x2.25 yon size nang gulong ko
Wala syang tatak pero Stock hubs ng foxter.. Pinutol ko yung part ng sabitan ng spokes para kumasya ang gulong ng mtb..
Mag kano pagawa
Gumawa ako knina😶 hndi nagmomove gulong ko,umiikot namn hub ko,ang hirap padyakan prang sisirain ko n kadena ko,any tips idol
baka na subrahan mo po ng higpit yung bearing. dapat maganda freewheel ng dalawang hub pag inikot mo individually.
Bakit parang bigla dumudulas yung gulong sa roller?
either madulas or di pantay yung hubs.
Nakakapag freewheel po ba?
halos wala pong freewheel.
Mabilis ba maka sira ng gulong yan
Di naman po gaano lalo na po pag makinis ang pagkaka grinder nung edge..
Magkano lahat na gastos mo rito?
450 po lahat kasama welding sir..
Pede din ba sa mtb idol?
yes pwede sya..
🤔👍🚴🇧🇷👏
Ilang feet yan sir? Pahinge ng sizes
8inches pagitan po sir
@@Kulikutz hub to hub 8 inches?
Yup.. Nilagyan ko din ng option para sa 29er..10inches naman distance ng hubs
Pano pag 26er? Ilang inch?
Pasok sa 8inches..
anong measurement sa harap?
yung attachement ng fork? adjustable po since iba2x sukat ng mga bike frames. pero kung yung distance ng bawal Hub, 8inches.
@@Kulikutz salamat sir. may ganyan din po ako. Planning to make an extension kasi. Medyo hassle nawawala alignment gulong sa hubs. Gawa ko kahoy sa attachment ng fork.
Nakakapag freewheel po ba?
Di po gaano sir.