TA2003P Mini FM Receiver With LM386N Audio Amplifier
HTML-код
- Опубликовано: 23 окт 2024
- Stay Updated with Our “Creative Science” WhatsApp Channel
Specially for Upcoming Project Experiments Short Video...
👇👇👇👇👇👇👇👇👇👇
whatsapp.com/c...
Components Details :
TA2003P AM/FM Radio IC
LM386N-1 Audio Power Amplifier
2 x 104PF
2 x 27PF
47PF
103PF
10PF
AM/FM Tuning Variable Capacitor
10K Resistor
4.7E Resistor
10K Linear Potentiometer
2.2uF Electrolytic capacitor
2 x 100uF Electrolytic capacitor
4.7uF Electrolytic capacitor
10uF Electrolytic capacitor
10.7MHz Ceramic Filter (2Pin)
10.7MHz Ceramic Filter (3Pin)
4 Pin Relimate Header Connector & Cable
Male Header Connector
22 AWG Copper Wire
Plastic Shaft With Holder
2 x 4mm Screws
2 x Potentiometer Knobs
9v Battery & Connector
Heat Shrink Tube
2 Inch 8 Ohm 5W Woofer
Link : PCB layout, Silkscreen, Schematic
bit.ly/2LfomSO
PCB Making Tutorial Link :
• How to Make PCB for Mi...
Follow Creative Science On :
Google Plus
goo.gl/r5pHM4
Facebook
goo.gl/uSNc7u
Instagram
goo.gl/WjYnXB
Twitter
goo.gl/uzFBpR
Pinterest
goo.gl/N5Twva - Наука
Такие приёмники я делал когда был школьником в 2004г. лайк что не забыто)
Such receivers I did when I was a schoolboy in 2004 like that is not forgotten)
Good job . I made this radio 5 years ago and it still working. So thank you very much.
Very good job 👍❤️
The last number on a ceramic capacitor refers to a multiplier rather than a value. So 104 doesn't mean 104 pF but 10*10000 pF or 100nF.
Exactly... Yeah i am here in comments section for this correction
A lot of us don't have the resources to make that board,if you ever make it a lot let me no I will and I am sure others would love to build it.
This is such a great job. What would be cool is if you could put it inside of a clear plastic case. It would be a way to protect the circuit from the environment and you would also show how the radio works. It would also look cool on a shelf or a desk. Another neat modification would be to put a headphone jack on it. Awesome!
Thank you very much sir, i was doing this radio and it was working very well.
Hi mohamed, can you help me to do it? I made this above instructions but didnt get any stations
connect 2nd pin of the Variable capacitor with 2nd number pin of the 10.5mhz oscillator
@@kpsreekumar To succeed your radio you mast try many ICs 'TA2003' especially Toshiba ones they are very sensitive, for the variable capacitor you can use FM one (with six pins) you use only three of them for the coils they mast be the same length and i'm sure that you'll have good results.
@@aviatordev9372 please don't do any modifications to the circuit, just use 10.5Mhz oscillator with 2 pins and 10.5Mhz oscillator with 3 pins. Be careful of them they are similar but the number of pins is different and good luck.
please explain about the digrams.. u dont use a variable capassitor? i need your explanation please.. thanks
Pcb look is very best
😍
@@CreativeScience what is the your contry
@@CreativeScienceHola amigo el radio me salió excelente fabricó muchos radios diferentes diseños pero esto me gusta mucho me dio un poco de tarea fabricar el pcb aparte tuve que utilizar un ocsilador de cristal pero me quedo al 100 le agradezco mucho y bendiciones
2=27pf
47pf
2=104pf
103 pf
10pf
10.7MHz ceramic 2pin
10.7MHz ceramic 3pin
TA2003P Am/Fm Radio IC
LM386N-1 audio power amplifier
4 turns 5mm of 22 AWG copper wire
2=3 turns 5mm of 22 AWG copper wire
10k resistor
4.7e resistor
2.2uf electrolytic
2=100uf electrolytic
4.7uf electrolytic
10uf electr
Am/Fm tuning variable capacitor
10k linear potentiometer
There is no 15pf capacitor in description but in diagram. Now I want to go far to buy that you done a big mistake it hurts me alot. My project is incomplete...😭😭😭😭
I want Replay fastly pls. What should I do
Sir, good and neat pcb, nice work. But where do we get variable capacitor? How much pf we want? From old transistor radio?
Bro I have a doubt.... Can I use 3pin variable capacitor instead of 4
And also is 2.2uf and 220uf same?
Iam anoob to electronics and student🤭🤭
Yes you can, the fourth pin is most likely just to hold it in place. And no, 2.2uF and 220uF aren't the same. 220uF is a hundred times more than 2.2uF!
Te quiero sugerir un proyecto, ya que tenés la capacidad en todo de realizarlo y no lo he visto en youtube. Yo se que se fabrica tanto receptor fm como emisor fm, y son pequeños los que vi en youtube. Hay posibilidad de que hagas un Walky? Por ejemplo: Walky A, emite en 90.0 y recibe en 100.0 y; Walky B, recibe en 90.0 y emite en 100.0 - Sería un proyecto genial. Gracias
But esta en spanish y nadie undertand :v
Can I use crystal clear filter
Very good pcb desing perfect good joob.like ...
thanks samıh savdır
Very nice video... What would be the average total cost for the project? May I buy it one from you?
so nice circuit ,fm best quality
3 pin 10.7 mHz ceramic filter kaha se milega? Is ka alternative kya hai?
I love your work very good nd interesting thank you
Where did you buy the plastic shaft and holder?
Hello, I congratulate you for the video, I would like to ask for the 22awg copper coils that table results 0.644mm, but from the video would seem bigger, could you tell me the actual diameter of the wire? thank you.
22AWG
@@CreativeScience Hello thanks for the reply, but 22AWG corresponds to 0.644MM?
Informed you later
22SWG. 5mm dia
Very nice pr ye sare compont market milenge kya
Can you say that this project will work I really want to make this but the electronics shop's people are saying it won't work so should I go for the project or not ?
this is perfect project, Mihir Bist off course u can try this
@@CreativeScience not working
Superb bro. Which software is better for PCB designing bro.help me out bro.
Thank you
The "2-pin ceramic filter" is not a filter but ceramic discriminator and it's pretty hard to get one's hands on one. It only looks like a ceramic filter.
I made this radio it works great 👍
Where you got parts?
i see coils are 3Turn and 4Turn ..what is inner diameter of coil ..is 5 or 6mm ?
Very good work !!! I'll try to do it ! Thanks !!
excuse me, I have a question, the ceramic filter is crystal ?
no
Creative Science , are you sure? Because in electronic components crystal just to mega hertz .
I need to buy one for my home use... Can you plz parcel me or provide me any link to buy online... I am not able buy online this kind of analog FM receiver circuit...
Excuse me bro , I have a another question. which one of program you use to designing pcb???
Eagle CAD
Creative Science , thank you
Good and very interesting video.
Very clearly. Will give it a try.
Nice video sir. FM ki 12 chenal Sunday degi sor.reply
sorry . but was the male pin used as a antena
Do you sell the pcb circuit board,or the whole kit ,i would love to buy at least the board
Super and Simple
Ye sare components eksath kis website pe milege .. koi batao please ❤️
I like your work look like highly profassional, so why don't you offer to sell them on eBay or Amazon, surely is very good business and income.
thanks Nabil Seoudi :)
can you tell me what bandwidth is ?? from what to what , in my country we have a different bandwith anh channels in that band
that speaker really needs a box but cool diy project :)
Why ?
Absolut Radio from London? They are on medium wave too
I like It kkm, have you FM transmitter?
Please check my community post, hope you will like my last post Anderson Martins :)
good project, works great
After making the pcb from your tutorial , do i need to do anything?
No that’s it you have a finished TV set moron
great project
tnahks
Can I get such type of ready made board . Pl help . At what price .
excelente amigo hace mucho que investigo este chip
gracias amigo PASSTRAN eci_twi :)
Excellent to watch
Thank you. very good
I would like to build an AM radio receiver,, is it possible?
Search for "crystal radio" you can use an lm386 for output stage
thank you!
:-)
Hellow Sir, Excuseme What is the sizes of the PCB
Nice bro. Fm tanismitter 10km renge curcit karo.
from where did you buy the am/fm variable capacitor?
from local radio repair shop you get that ,
@@sagarghatti now,its unavailable in our near shops
@@pranavgireesan6984 ya even online . this product is not available :(
@@pranavgireesan6984 other search in shop where electronics hobby kits are vailable . thatis final solution or this . you wil get in old radio shop keep on enquirer you ll get
@@sagarghatti Thank you
ऐसा रेडिमेड बोर्ड मिलता है क्या । लोकल मार्केट मे नही मिलता ।
मुझे भी चाहीये ।
Excellent project
capta todas las emisoras de fm? o solo algunas?
Please sir no 10pf in the schematics and no variable capacitor?
You are crazy indian person. 😄 keep it up.👌
Good work 👍 I follow from Turkey.
thank you Nihat Yıldız :)
Thanks
Please say me tuning variable capacitor model
What is the price of the designed PCB?
How to connect the tunning capacitor I bought one it has 4 pinouts.. Plz help
Good job bro.
Wifi Bluetooth or RF intercom please. For motorcycle riding, expedition. Please
Okay Debraj Biswas i will try :)
Creative Science Dada apni Bangali? Tai na?
haa, ami bangali
Creative Science 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
Khub valo laglo... Khub sundor lage video gulo.... Jodi possible hoi ektu fb id ta deben??
thanks bhai, :) tumi creative science er fb page e msg koro
Good job
hi, i need this card. If you are able to manufacture continuously, I can be a customer. If it's positive for you, I can get the price information. Thanks for the effort, I wish you a good day...

Very good (y)
Have you AM receiver?
Website to buy all components ?
Hey friend where u bought blank PCB
you can buy it from amazon.in
Capacitor with 103 isn`t 103pf, it`s 10nf and 104 is 100nf
how can i get the components and PCB , can you help me by sending i can pay for the components and shipping i will have it assemble myself
Bela montagem
Most excellent!
I also want this bord । where i can get । please help
Muito bom gostei
obrigado Cesar ° :)
What tuning variable capacitor model???
from where I can get all these components
goooood thank you for vedio
It is possible you will get many orders from many people
ceramic filter is essential or not?
Yes it is essential.
Good!
Amazing
Please show me fm PCB diagrams
Check video description for download link
Sir what is the dimensions of this pcb layout. Width and height
C: 104=100nF, 103=10nF ;-)
🤭😬😁
вот именно!
@@CreativeScience
Hi
Is it possible to sell all the contents together in one package through any market such as Amazon or send it through purchase
What is the value of gang capacitor
Can u assemble such type of plate for me, at what cost.
What is the total cost of it.
Any Link For AM/FM variable Cap eBay, AliExpress link
Exelent
Can we get such type of ready made board. I am trying but in vain. Can anybody help me .
how long is the antenna wire?
wow cool!
Sir.... I need this board . Also pay charge.
I need
Nice experiment man..
Eu fiz com CD2003 e recebe banda aérea.
What is the size of pcb
can i use a 10.7 crystal oscilator instead of that 2 pin ceramic filter?
@@davidwanklyn8842 Thank you so much! After no transistor radio/this radio with the ta2003p didn't work... I just used a rda5807m but now that you reminded me I think I'm gonna revisit this project with the ta2003p again!
Advance Congratulations to you for rework on ta2003p ❤️ sorry for that I didn’t get your comment 2 years ago 😐
Thanks @david for helping him 👌❤️
Nice video