Hiya from Finland, i'm new here =^.^= I was really surprised that you didn't have millions of followers, you and everything you do is so amazing, i'm super glad i found this channel.
Omg! Thats so cool! can u please make more printable harry potter stuff? with the template please! i love u!! i made almost everything u make!!! Im obsessed with ur tutorial! and it looks so real!!
If yall can't find a fluffy pompom like the pink one here, you can make a very similar one your self. (here, getting access to craft stores is pretty hard right now) Cut out two identical doughnut shapes out of cardboard and put them on top of each othet. Tie them together with the end of a piece of yarn that's as long as your arm. Now you wrap the yarn around the cardboard going through the hole in center and then around the outer edge and the through the hole again. Once you have used up the string cut a new one and keep going. Once the whole doughnut is covered you can decide how full the pompom should be, for something like this is say keep going until you have trouble getting the yarn through the hole. A thick needle can be helpful here. When you decide you are done:cut a neither string about as long as a ruler. If you want an elastic like in the video you should tie one around the middle of the string so that the loop you get is about as long as your Ringfinger. Then you take the wrapped dougnut shape and use sharp Scissors to carefully cut along the outer edge. BE VERY CAREFUL DURING THIS STEP! Then you should take the string you just cut and carefully slip it in between the two cardboard pieces and wrap it tightly around all the yarn in the middle. Then tie a knot. Then you should be able to slip off the cardboard pieces without anything falling apart. Be careful in case you made a mistake. Once the card bord is removed grab the pom by the tie in the middle. Now you need to brush out the yarn, you can do this with any bristle brush, wire dish sponge, vey thin comb, metal horse or carding brush or a standard hairbrush if you're patient. Start with one side of the tie, then do the other. As long as everything is tied together tightly, the thing should be able to handle some tugging, but don't go overboard. Keep going until you likr the texture, then use your fingers to move the fur around until it becomes a round ball. If you missed spots you can go back over them again :) Happy Crafting!!!
Hope you had a lovely birthday!😊 Such a cute Pygmy Puff! Think I would (will - hopefully) use needle and thread tho... (I know, I know: ”no sew”😜) I would love to see a video guide of the tools, supplies, printers, machines and gadgets you use and recommend when crafting! Some tips on things to consider when/if investing in printers and such would be very helpful! Fingers crossed! //Åsa from Sweden
I love you laughing after attaching the eyes! The only thing I would do differently is sticking the tape to the snout, not the pom. It turned out very cute. Appreciate the eyelids!
Omg only you could think about such little detail like the eyelids, I love love love the laugh of tenderness after seeing the face complete,. You know? I’ve always had my daubs about this creatures, I’ve never really like them until this video, thank you Danny! And Happy bday in advance! ✨🎉🎆
Happy Birthday. Love the video he is so cute. I am in the middle of making a Wizard Chess board and Dementor figure. I'll have to try this one. Thank you.
I got the one sold a while back by Litjoy, complete with a little cage. I was horrified that at the same time Litjoy was selling a pair of Pygmy Puff Slippers, as if someone skinned a Pygmy Puff to make bed slippers Ugh !!
Happy Birthday Danny for Sunday. I cringe every time you use scissors for cutting paper & felt or fabric. You should never use the same scissors for both. Cutting paper with fabric scissors ruins the cutting edge & vice versa. You could put the pygmy puff in a card " cage" using your cricut to cut the card. OR use a tiny mullioned lantern minus the glass but use wire mesh instead.
HAPPY BIRTHDAY DANNYYY HOPE YOU HAVE A GREAT DAY AND LOOKING FORWARD TO YOUR FUTURE WORKSSS
Happy Belated Birthday Danny. Your Pigmy Puff is too stinking cute!👍👍
Awwwww this is so cute. I always wanted this little guy
Hiya from Finland, i'm new here =^.^= I was really surprised that you didn't have millions of followers, you and everything you do is so amazing, i'm super glad i found this channel.
Happy birthday Denny🤩🎉🎈🎈
HAPPY BIRTHDAY TO YOU DANNYYYYYYYYYY!!!!!!
Happy Birthday for 4 days time! Hope its a good one...well as good as it can be!
Have a happy birthday 🎂
So cute! Happy Early Birthday Danny!
Omg! Thats so cool! can u please make more printable harry potter stuff? with the template please! i love u!! i made almost everything u make!!! Im obsessed with ur tutorial! and it looks so real!!
Happy Birthday Danny!!💗
😭😭 it’s so cute. It IS perfect!
Danny can you please make a life size niffler?
happy birthday Danny thank you again for your work
If you have a Cricut maker, you can cut out the felt on that and it is super simple!
It's seriously adorable!!!
Just subscribed for your bday! Happy early Birthday Danny! ❤💜❤💜❤
If yall can't find a fluffy pompom like the pink one here, you can make a very similar one your self. (here, getting access to craft stores is pretty hard right now) Cut out two identical doughnut shapes out of cardboard and put them on top of each othet. Tie them together with the end of a piece of yarn that's as long as your arm. Now you wrap the yarn around the cardboard going through the hole in center and then around the outer edge and the through the hole again. Once you have used up the string cut a new one and keep going. Once the whole doughnut is covered you can decide how full the pompom should be, for something like this is say keep going until you have trouble getting the yarn through the hole. A thick needle can be helpful here. When you decide you are done:cut a neither string about as long as a ruler. If you want an elastic like in the video you should tie one around the middle of the string so that the loop you get is about as long as your Ringfinger. Then you take the wrapped dougnut shape and use sharp Scissors to carefully cut along the outer edge. BE VERY CAREFUL DURING THIS STEP! Then you should take the string you just cut and carefully slip it in between the two cardboard pieces and wrap it tightly around all the yarn in the middle. Then tie a knot. Then you should be able to slip off the cardboard pieces without anything falling apart. Be careful in case you made a mistake. Once the card bord is removed grab the pom by the tie in the middle. Now you need to brush out the yarn, you can do this with any bristle brush, wire dish sponge, vey thin comb, metal horse or carding brush or a standard hairbrush if you're patient. Start with one side of the tie, then do the other. As long as everything is tied together tightly, the thing should be able to handle some tugging, but don't go overboard. Keep going until you likr the texture, then use your fingers to move the fur around until it becomes a round ball. If you missed spots you can go back over them again :) Happy Crafting!!!
Hope you had a lovely birthday!😊
Such a cute Pygmy Puff! Think I would (will - hopefully) use needle and thread tho... (I know, I know: ”no sew”😜)
I would love to see a video guide of the tools, supplies, printers, machines and gadgets you use and recommend when crafting! Some tips on things to consider when/if investing in printers and such would be very helpful!
Fingers crossed!
//Åsa from Sweden
Can u make the letters that dobby took that will be cool
I love you laughing after attaching the eyes! The only thing I would do differently is sticking the tape to the snout, not the pom. It turned out very cute. Appreciate the eyelids!
Happy birthday!
this is cool and it came out on my birthday!
Omg only you could think about such little detail like the eyelids, I love love love the laugh of tenderness after seeing the face complete,. You know? I’ve always had my daubs about this creatures, I’ve never really like them until this video, thank you Danny! And Happy bday in advance! ✨🎉🎆
Happy Birthday. Love the video he is so cute. I am in the middle of making a Wizard Chess board and Dementor figure. I'll have to try this one. Thank you.
Omg! I’ve wanted to make this so much! Thank you so much Danny
Don't worry Danny! This was totally adorable~! I love the snout! This was sooooo cute!!!!!
Cool! Happy birthday! Mine is actually about a week after Valentine’s Day so happy birthday to the both of us!
you should do a room tour
Wishing you a Very Happy birthday 🧙✨!!
That's just super adorable and sweet! Happy Birthday!
Happy birthday in advance,can you make a philosopher's stone AKA sorcerer's stone ?
Happy early birthday!
Happy birthday 🍰🍰🍰🍰🍰
Thanks Danny. It turned out really cute :)
It's lovely! Thank you, and happy birthday!
Your videos look amazing.
Can you make a diy puffskein?
Danny happy birthday in advance! Thx for this video!!
Oh my goodness that is ADORABLE! I think I'll be trying this one myself! Thanks Danny! Love your channel!
WOW, we share birthdays :D happy b-day to you :3
It's been a while since I've been here!
Its sooo cute I hope I can make it coz im pretty lazy HAHAHA love your vids also💗
Download link on Wizardry Workshop page says blocked by Bitly
Круто
Aw, it looks like a pink hedgehog
I got the one sold a while back by Litjoy, complete with a little cage. I was horrified that at the same time Litjoy was selling a pair of Pygmy Puff Slippers, as if someone skinned a Pygmy Puff to make bed slippers Ugh !!
helloooo Early folks...
Happy Birthday Danny for Sunday.
I cringe every time you use scissors for cutting paper & felt or fabric. You should never use the same scissors for both. Cutting paper with fabric scissors ruins the cutting edge & vice versa.
You could put the pygmy puff in a card " cage" using your cricut to cut the card. OR use a tiny mullioned lantern minus the glass but use wire mesh instead.
It's ugly but sooooo cute! hahahahahaha
They don't have snouts. Lil short nose
That do have snouts, just short snouts. Mine turned out too long.