I know the feeling. It was probably sophomore year in high school over 30 years ago now for me. Every Saturday and my little brother made fun of me for it.
I made my own version of this and 25yrs later it still looks pretty good sitting in my sister in law’s dining room, thanks Norm for sharing your knowledge with us all
I just wanna thank Norm, if it wasn't for him I would've never gotten into woodworking. But my wife wouldn't thank him because we've spent a lot of money on tools LOL. When life gets hard just go to the shop & build something, it fixes stress every time.
I have every video Norm Abram's made. Thus, I'm blessed. Thank you Jesus. So when I saw this, it brought tears of nostalgia to when I saw it live. It is my belief that Norm and his producer (Mr Morash); were the greatest DIY'r videos ever made. And many will say "Yes". And one of THE best things he did, was to show the "Finished item"; before he showed us how to build it. MOST others do that just the opposite. I believe that is dead wrong. And the greatest thing about Norm; he is the nicest person I have ever met. I had the pleasure of seeing him live 3 times. And each time; they (and I) couldn't get over how nice he was with us. Wow! Thank you Norm Abram. For YOU are THE quintessential "Cut Above". For many of us will never forget what you shared of your talents with us; and we loved you. May Jesus bless you and yours always.
Bessey clamps!!! Finally in this episode. While I still have the Jorgensen pipe clamps Norm used in the earlier episodes, these Bessey clamps have been my Go To clamps thanks to Norm and NYW. You can never have enough clamps in woodworking. Norm sold me on these Bessey clamps when he started using them on the show. At the time it was a huge investment - these clamps were not cheap in the 90s. Or now - quality is not the same today. My grandfather always told me to buy the best tools. He and Norm were right. These Bessey clamps in many multiple lengths have lasted over 30 years and are as good as the first day I bought them (even with the glue stains, chips and scratches and dings over these years). Thanks again Norm for the memories and your woodworking teachings.
I noticed the late Sam the Shop Dog made a cameo in this episode, I remember seeing Sam's appearances on the show when I watched the show as a little kid back in the early 90's.
Norm: Your "Workshop" videos are television at its best. I never miss them. Your emphasis on shop safety is vitally important, but unless I've missed something, I've not seen you mention hearing protection. Some power tools produce noises that are not just loud, but also occur at frequencies that can be dangerous to your hearing. Quality hearing protectors are quite affordable, or ear plugs from the drugstore are dirt cheap and provide excellent protection. Thanks!
the tip on the tape is loose so it can compensate for it's own thickness when pulling on something vs. pushing against something. the trick to start at 1" on the tape is still useful though
Norm is king but he’s wrong about tape measures. The end tang is loose intentionally to allow for the thickness of the tang itself when butting it on an inside measurement vs pulling it on an outside measurement.
He’s perhaps wrong when applied to a new tape, but the slots wear with much use and the accuracy suffers…which I seem to recall is what he said. I have a 40 year old Stanley tape and it’s done just that.
@@jimkontos4221 he says it’s 16” deep. If you were to put a laptop on it and still have room for a notebook or text book in front of it I’d say 24” inches minimum and probably better at 30”.
The ends of the measuring tapes don't "get loose". They are made that way so you can measure inside and outside lengths. The movement matches the thickness of the end tab. I've noticed Norm has said this at least twice. It's odd he didn't know this well understood feature.
6:14 actually, Norm, the hook of a tape measure is designed to be loose so that it measures the same for inside or outside measurements. The play is exactly equal to the thickness of the hook itself. Amateur.
loving this show however why are there so many shows where everything is cut on a Table saw, i'm sure everyone has a table saw at home. not saying its bad but showing how to do it without the perfect machine shop would be nice
Well of course there are other ways of doing some of these things, even if you only wanted to use hand tools. Honestly though, to anyone interested in woodworking, a cheap portable table saw or used contractor saw can be picked up fairly cheap. Even the cheapest table saw you can find is better than not having one at all
Very difficult to see these episodes "re-broadcasted"on You Tube. Norm did not sign up for the internet and a world wide audience. This is wrong. Norm is not involved in any way with these "posts." Kind of like finding a Shelby 500 Mustang car dusty in a barn for 30 years. The guy who just "owns the building" has no right to just post these episodes in total on some "fake" so called "OFFICIAL" site with Norm's face and all his talent. Not gonna fly. Just another example of corporate sleeze. Norm is a human being who should be involved and compensated. Norm Abram needs a lawyer. Period. Gack!
@@201081hero Sorry~ NOT! This is a waste of Norm's excellent work with no "adaptation" for the internet format. Not fair to Norm. The limited "views" illustrate what a poor fit "TV shows" are for You Tube. Blah! Irresponsible!
What I never liked about this program is that all f the projects Had to be based on some example in a museum rather than an original design. Maybe because all of my projects were original designs. I never felt comfortable copying some else's art.
I respect that take. That being said, there's long traditions of furniture making in the world, I understand why would someone would want to pay homage to that or build within the confines of a style.
I feel like I’m back in my childhood on a Saturday!
I know the feeling. It was probably sophomore year in high school over 30 years ago now for me. Every Saturday and my little brother made fun of me for it.
Amen. This was church for me!
Think this is why I love woodworking (though I do it infrequently) and all other home DIY.
Grew up watching norm! 35 now
I was telling my wife the same exact thing!
I made my own version of this and 25yrs later it still looks pretty good sitting in my sister in law’s dining room, thanks Norm for sharing your knowledge with us all
I just wanna thank Norm, if it wasn't for him I would've never gotten into woodworking. But my wife wouldn't thank him because we've spent a lot of money on tools LOL.
When life gets hard just go to the shop & build something, it fixes stress every time.
Exactly. Busy hands calm the mind.
Same for me.
Norm will always be the GOAT!
Ah the memories of "assembly" as a four syllable word. Just great. So glad these are on RUclips for the ages.
The original and over 30 years later - still the best!
Greetings from the BIG SKY. I, too, watched Norm on Saturdays. Never wanted to miss this show.
Man who didn't like waking up on the weekend to NYW! Thanks for sharing these!!
stunning at what he does old tv was always the best
Norm you are the most wonderful craftsman, I never missed your show and all your fans miss you and wish you a very happy retirement
I have every video Norm Abram's made. Thus, I'm blessed. Thank you Jesus. So when I saw this, it brought tears of nostalgia to when I saw it live.
It is my belief that Norm and his producer (Mr Morash); were the greatest DIY'r videos ever made. And many will say "Yes". And one of THE best things he did, was to show the "Finished item"; before he showed us how to build it.
MOST others do that just the opposite. I believe that is dead wrong.
And the greatest thing about Norm; he is the nicest person I have ever met. I had the pleasure of seeing him live 3 times. And each time; they (and I) couldn't get over how nice he was with us. Wow!
Thank you Norm Abram. For YOU are THE quintessential "Cut Above". For many of us will never forget what you shared of your talents with us; and we loved you. May Jesus bless you and yours always.
I’ve learned so much from Norm Abram and continue to learn from watching his videos.
Oh oh oh. I love watching this show. I watched it for years.
Great video!
Used this technique for the front on my desk 30 yrs ago. Sitting at that desk watching this feels pretty cool. Thanks Norm.
Me, too.
Bessey clamps!!! Finally in this episode. While I still have the Jorgensen pipe clamps Norm used in the earlier episodes, these Bessey clamps have been my Go To clamps thanks to Norm and NYW. You can never have enough clamps in woodworking. Norm sold me on these Bessey clamps when he started using them on the show. At the time it was a huge investment - these clamps were not cheap in the 90s. Or now - quality is not the same today. My grandfather always told me to buy the best tools. He and Norm were right. These Bessey clamps in many multiple lengths have lasted over 30 years and are as good as the first day I bought them (even with the glue stains, chips and scratches and dings over these years). Thanks again Norm for the memories and your woodworking teachings.
I made this table a long time ago. It sits proudly in our hall. I made it with one long drawer.
Norm is the best 👍🏻
Timeless, love it
Great project, great series.
I made this as one of my first “big” projects many moons ago when I had much hair and very few strands of it were grey.
Thank you Norm. I built your blanket chest. It is standing the test of time and grandkids.
I noticed the late Sam the Shop Dog made a cameo in this episode, I remember seeing Sam's appearances on the show when I watched the show as a little kid back in the early 90's.
Norm: Your "Workshop" videos are television at its best. I never miss them. Your emphasis on shop safety is vitally important, but unless I've missed something, I've not seen you mention hearing protection. Some power tools produce noises that are not just loud, but also occur at frequencies that can be dangerous to your hearing. Quality hearing protectors are quite affordable, or ear plugs from the drugstore are dirt cheap and provide excellent protection. Thanks!
Just what I never knew I always wanted 🤪
Ha! This was my first build ever from one of his plans. Still have it today.
Me too!
Norm Abram is my Bob Ross.
Fun fact from behind the scenes: at 5:58 you can see Russell’s family dog, Sam, resting in the shop doorway.
I would love to see Norm's personal workshop
Good project.
I’ve learned so much Norm Aband continue to learn
Would love to see how much this has darkened up over the years. I bet the color is outstanding now.
the tip on the tape is loose so it can compensate for it's own thickness when pulling on something vs. pushing against something. the trick to start at 1" on the tape is still useful though
I would varnish both sides of the top equally to avoid warping.
I would prefer the 4:3 original, so much gets lost in cutting it to 16:10
Hello Norm, I was wondering if you ever learned to sail that boat you built.
Norm is king but he’s wrong about tape measures. The end tang is loose intentionally to allow for the thickness of the tang itself when butting it on an inside measurement vs pulling it on an outside measurement.
He’s perhaps wrong when applied to a new tape, but the slots wear with much use and the accuracy suffers…which I seem to recall is what he said. I have a 40 year old Stanley tape and it’s done just that.
👍
Build a CIVILWAR IRONCLAD! 😁👍👍🇺🇲
Amazing what you can build with glue, brads, and some tough gloss polyurethane 😉
Would it work as a homework table for kids
How much should I change it
@@jimkontos4221 he says it’s 16” deep. If you were to put a laptop on it and still have room for a notebook or text book in front of it I’d say 24” inches minimum and probably better at 30”.
The ends of the measuring tapes don't "get loose". They are made that way so you can measure inside and outside lengths. The movement matches the thickness of the end tab. I've noticed Norm has said this at least twice. It's odd he didn't know this well understood feature.
What’s with the nail belt and hamer, I don’t know any cabinet maker wearing that….
Yungun
6:14 actually, Norm, the hook of a tape measure is designed to be loose so that it measures the same for inside or outside measurements. The play is exactly equal to the thickness of the hook itself. Amateur.
table with "draws""
pbs😀
She allows him to film in her shop then he takes exception to the price of the table -on camera. Seems rude.
loving this show however why are there so many shows where everything is cut on a Table saw,
i'm sure everyone has a table saw at home. not saying its bad but showing how to do it without the perfect machine shop would be nice
Well of course there are other ways of doing some of these things, even if you only wanted to use hand tools. Honestly though, to anyone interested in woodworking, a cheap portable table saw or used contractor saw can be picked up fairly cheap. Even the cheapest table saw you can find is better than not having one at all
Very difficult to see these episodes "re-broadcasted"on You Tube. Norm did not sign up for the internet and a world wide audience. This is wrong. Norm is not involved in any way with these "posts." Kind of like finding a Shelby 500 Mustang car dusty in a barn for 30 years. The guy who just "owns the building" has no right to just post these episodes in total on some "fake" so called "OFFICIAL" site with Norm's face and all his talent. Not gonna fly. Just another example of corporate sleeze. Norm is a human being who should be involved and compensated. Norm Abram needs a lawyer. Period. Gack!
Check back on Monday. Then we can remove all your comments :)
@@newyankeeworkshop Oh good. So then I can continue my advocacy for Norm Abram ~ The person who is a woodworking craftsman.
@@stevenwarner7348 You should do the right thing and apologise for all of your misinformed comments.
@@201081hero Sorry~ NOT! This is a waste of Norm's excellent work with no "adaptation" for the internet format. Not fair to Norm. The limited "views" illustrate what a poor fit "TV shows" are for You Tube. Blah! Irresponsible!
What I never liked about this program is that all f the projects Had to be based on some example in a museum rather than an original design. Maybe because all of my projects were original designs. I never felt comfortable copying some else's art.
I respect that take. That being said, there's long traditions of furniture making in the world, I understand why would someone would want to pay homage to that or build within the confines of a style.
It was the era of reproduction furniture. Now is the era of fibre boards and screws.
WIsh he had made a gun cabinet at some point
“I’d like to take a moment to talk about shop safety.”
🥹
Skip!