Trying To Fix A Broken GameBoy Game!
HTML-код
- Опубликовано: 16 сен 2024
- T-shirts! - theretrofuture...
The Retro Future
PO Box 174
JERSEY, UK
JE4 9RF
Check out other links below:
- Screwdriver Set (Affiliated): ebay.to/2QCjLNO
- What tools do I use? - bit.ly/2DO7G3p
- Support me: / theretrofuture
- Facebook Page: bit.ly/2t1ipkQ
- Facebook Community Page: bit.ly/2G6EB5B
- Instagram: bit.ly/2ydhxik
- Twitter: bit.ly/2iJ6YMS
Please note links above are affiliated where possible to support the channel. Thank you for your understanding. Links are affilated where possible which means I may recieve a small comission. Thank you!
This is a reupload because a part of the video got deleted from my rubbish editing skills.. enjoy!
I was wondering what happened earlier. I saw something early today and thought I had something to watch during my break. At least I got to watch it now, not complaining, just thought I was going to be out of the loop
O...
I also managed to delete the part where I said I was taking the battery from another game as I didnt have a spare... jeeeeez what an amateur...
Pfffft....and have you even heard of flux? 😂
"alao" lol.
Alao has been archived.
*_B O I_*
I have a broken zelda game ;-;
White vinegar for the corrosion.
Pencil eraser for the contacts.
Get some flux.
Pencil eraser?
I love watching these repairs while I grind in Pokémon.
Good stuff!
Me too.
wait you're the guy that keeps posting videos that somehow get into my recommended, funny seeing you here.
"You should definitely use flux. I don't have any though."
Sounds like me:
"You should definitely use a fine-point tip. But I'm going to use a chisel tip." or
"You should definitely know what you're doing. But I'm just going to wing it and hope for the best!" :)
I love you for doing this - one of my nightmares has been that when I'm much older (I'm 25 now), that these games and consoles would not exist due to corrosion and overuse.
thats what emulators are for
You can use a normal sheet of white paper for cleaning contacts like those. Acts as a very mild sandpaper; just enough to take any oxide off the top with a bit of a rub. Worked well for me many times.
Great channel!
It never gets old watching you keep gaming history alive one small piece at a time.
Good to see your back to the classic Gameboy repairs! This is the reason I started making videos!
2 subs behind me lol
Mad that this guy was rescuable!!!
I couldn't believe it!
@Jerry Ufer Ha! Good one.
Good thing this cart only needed some heavy cleaning.
I had a pac man gbc cart that completely refused to work even after cleaning it. But all i had to do was reflow the contacts and it started working again.
Good job mate :-)
Cheers man! Looking forward to our challenges ;) I havent ordered anything for it yet, have you?
@@TheRetroFuture Not yet, I am so unorganised I will probably do it all in the last couple of months and then fail to sell them in time !!!!
I love ur videos so muchh! Im about to add a backlight mod to my gameboy color myself it will be my first retro repair but it seems fairly simple wish me luck ill need it! Keep up making the best videos
Your very sincere comment has given you your first subscriber.
(Me. I subbed.)
MonicaDemon384 thank you so much your so kind
@@jongreg np
Nice work Elliot. It’s interesting how much retro tech can be saved by just giving things the mother of all cleans.
I might have to let my local vintage shop know to NOT throw out any “broken” carts.
Re: Labels: Admittedly I keep a load of adhesive paper around for toy resto’s, so labels are a snap. But to anyone reading this, edit the image file to have ‘repo’ on it somewhere.
Good idea with the "Repo" on the label. I need to get a good printer when I have the room.
@@TheRetroFuture Yeah - I do it for 2 reasons. 1) hard core collectors seem to get their knickers in a knot, but also 2) *if* I ever go to sell, it reminds me to tell the buyer 'oh yeah, I remade that label'.
Well done m8. Im glad your fixing these games so they last a little longer.
My son found a gameboy game chip in the dirt a few weeks ago, Curiosity as to what game it was led us to trying to fix it, we eventually got it to work after fixing some traces, it turned out to be a really broken Pokemon red version. All Pokemon are black boxes
Super Mario Land 2 6 Golden Coins is one of my favorite Game Boy games, right next to the Warioland 1, 2 and 3.
0:47 SCREWDRIVER FLIP I WANNA DO THAT
yess, i love this style of video
I loved how there was no audio during parts of the first video lol
Awesome, I have Mario Land 2 and love it. This is awesome! Love these videos!👍🏾👌🏾
I accidentally broke the trace negative side of the game-boy circuit board. I used a shabby game because I had no experience with Soldering. I was trying to fix it. I should've used Flux and something like your pliers instead of using a heating and flat screwdriver as pull it gave too much force and popped some green off the board. Thanks for this video, I learned a lot what to do on my next attempt.
Baking soda & white vinegar is also effective for removing corrosion from electronics. I'd recommend a rinse then final clean with isopropyl afterwards however.
Should use a bit of brasso on those pins for good measure.
For contacts i use brasso. Its used to clean and polish brass and copper. I use it and leaves those contacts brand spanking new.
I use something called Brasso, or any metal cleaner for your kitchen or bathroom, really. It is slightly abrasive, but it's meant to knock off the top layer of rust and restore the contacts back to its original glory. I would use it on a case like this, not every cartridge. Try it!
Good shout!
I ordered a game boy case colour case by accident but now from your videos I can replace the case on another one, thanks!
you are an artrist of re-animated things like this, bravo
Love the thumb around with the screwdriver and the toothbrush lol
Thought you were doing this one ASMR style when you were up close to the camera at the beginning
Dude I swear, you’re like the Bear Grylls of video game repairs. You sound like him, and talk like him! It’s uncanny.
“To fix this cartridge, we’re going to have to traverse this dangerous clean. Hopefully, we can get it working again by the end of the video”
Just clocked/beat that game last night.
No shit it took me about 200 times to beat the final wario level boss!
Excellent video mate!
Oh. and fiberglass pen is invaluable for stuff like that. (with care ofc. It's very abrasive)
I use a good ol' pencil eraser for that, it works wonders.
Wow thanks for uploading a video on how to fix a game! Because I recently got 4 more and one gameboy original and one of the games is called Pokémon pinball and the rumble isn’t working but when i first got it i just rubbed the battery area because it was kinda corroded and it worked! But it stopped a while after that. Keep up with the excellent videos (doesn’t matter if the editing is bad (i dont care!))
You're amazing! Now I hope that I could fix my own games like that as well. 😊
I fixed a pokemon yellow game that would freeze with pikachu screaming like nuts. Turned out the solder on the chips were weak, and just touching each pad with a solder iron fixed it
When one of my gameboy games froze during gameplay I just simply wiped the pins down with a qtip. The best part is you don't even have to disassemble the cartridge to do so. I didn't use alcohol on the qtip by the way because with my luck I had a feeling it would make things worse and that I would never be able to play the whole game all the way through without it freezing.
This video is great! Because I'm trying to learn how to get decent at soldering. Thanks Elliott!
Could you make a video about relabeling the cartridge?
1:10 this doesn't look bad.
At least what I've seen when restoring some older electronics.
Great video! Always triggers me when you use the Isopil..Isopo.. Isopropyl alcohol and leave the bottle open! But it was so satisfying how a second later it was magicaly closed. Haha, keep the great job, I love your videos!
Dude ur the best thank you so much this happens with my gameboy color and donkey Kong
It looks like it was in water, but if there was corrosion from battery acid/battery leakage, clean the affected areas with vinegar, and scrub them down. the corrosion can work its way underneath the solder mask too. :/
That’s so awesome. That game is absolutely worth saving!
Great job! You saved that SML2 cartridge!
Love your videos, Elliot!
Thanks!!
A very satisfying repair good job!
When the contacts on a game are quite bad I like to use Brasso.
Glad you got it working
Next time if you want to protect the label while washing it, just put some electrical tape or vaseline over the label first before you dunk it. That should help keep water off it.
Excellent work!
so i watched this because i got mgs and it didnt work, the inside looked fine but i couldnt open the card cause i dont have that screwdriver yet. when i saw him put the card in and out a few times i thought to myself 'might as well try that first' and it actually worked lmao. funny that such a simple method solved the problem
A light rub with an Emery Cloth, or light Steel Wool would have cleaned those contacts right up. And solder contains just enough flux to make it workable... perhaps flux is too over-used. For removing solder, you need some desoldering braid... I can send you a couple of rolls if you want. (I have a room-full!)
Love your channels. Thanks for doing what you do. Keep up the good work.
Thanks pal!
Watched the original video and watching this one to support you with a view
Haha thanks.
I wish you included the part were you did solder a new battery in place but whatever, but i can do say that this game is a hardware pusher with amezing graphics in glorious color on gameboycolor, despites being originally in B&W.
Uhh... I did?
WD-40 is great for cleaning and polishing the old crusty tarnish off those old cartridges.
Nice repair!!
I hope you keep that game...
Servisol (contract cleaner)and a fibreglass pen, always great for cleaning contacts.
I love trf videos. I've learned so much!
You may not have to take the plastic off. Just scrub the metal inside with some sort of brush and it can come back to life.
ufff mario land 2 a real gem of a game
That was my favourite GB game before I got Pokémon.
Great work!
From my experience, 90% of the time, is dirty copper contacts. Usually cleaning with isopropyl is enough to bring the cartridge back to life. Few times I had to scratch it to expose the clean copper. Only a handful of times, I had problems with internal battery. Game Gear cartridges usually works better, but good Lord, they're extremely annoying to open it.
Top Job!
Boy they sure made some bulletproof cartridges back then
Great video lad keep up with good work
I sold my Gameboy micro. It hurt my hands to play and I have a sp modded GBA but I still miss my micro
Why even sell systems? collect them.
I recently bought and realised I really won't be using it to play anything, it hurts so bad especially playing a game that requires a lot of pressing buttons like f-zero.
@@_MJ07_ are you going to sell it?
@Lucario's Gaming might try it, but doubt that would work. I've got big hands, that's the problem haha
@@idkman1562 nope, it's on my Gameboy shelf now dude. Sorry haha.
Great vid! 😁 👍🏻
When you can't be bothered thinking of a clever comment because you know sjm will get more likes anyway
NO NO DO NOT PLACE THAT IN THE SINK !!! Wahhh lol
It SAVES! (I honestly thought he was gonna skip that part)
It’s a cotton bud. We don’t call it a q tip in the U.K.
Love Your Videos !!!!
Impressive, you are the man!
Haha thanks!
Re upload?
Wow awesome fix i use 1 up cards to clean my games
Literally the same one i was trying to clean😂
You need to tin your soldering iron or the tip will oxidize quicker
I'd love to see a live stream of Mario Land 2
Not of me playing it... took me 3 tries to complete that level for the video..
Its the first level.
I just used A Bread knife to remove the screw lol
Thats my favorite game on the gameboy!
You're amazing! Keep making videos! 🙏
Thanks!
You should use a bit of potato on the frogs
6:50 HE DID IT AGAIN
Having this problem with a Pokémon crystal and Pokémon gold I had bought a few years ago. Decided to take them out and play, ended up not working.
Did scrub them with AP. One has rust on the back, and some corrosion. Don’t have solder to take the battery off, so spent a time using qtips around everything.
They seem to work here and there but not everytime. So a bit sad.
HOW HAS NO ONE SENT THIS MAN FLUX YET
Mine has some gold missing on one of the circuits. You can see the copper under it under a scope. Im guessing thats why mine wont load. Its a centipede game boy color game.
I recently bought a Mario Land 2 game I had to replace the battery and put solder on the pins that were corroded away
should have used a battery holder so if you ever need to replace it again you can slide old one out and slide new one in
I heard that's a really good game. I should pick it up.
It sure is!
I almost always have to do a cleaning whenever I buy a used gameboy game off eBay. They almost never work and when i open the cartridge up i just see so much dirt and grime even if the seller cleaned up the outside to look pristine 😅.
A gentle run with a magic eraser or even a pencil eraser is a great tool for cleaning copper pads.
Ahh yes! Good idea.
Pencil eraser yes; magic eraser no. Magic erasers are pretty much a fine-grit sandpaper and can damage the pins. Maybe as a last resort if nothing else works.
You ought to of used something like brasso on the pins, depending on how severe the corrosion is of course. (Be very careful with how you use)
Should add to use alcohol after cleaning with brasso.
Congratulations very god
have you ever had to repair a game that has the gold contact points worn out, like on a GB/GBA game? If so can you make a video of it? as i have two old pokemon games that have been stored in a bathroom cupboard for possibly 10 years.
You are my hero!!😃😃
Awh thank you :)
nice easy fix, does the board not need some more attention though?