Great video 👍 When airbag light comes on some cars it's usually the front passenger seat repair disconnect yellow line plug under seat clean with isopropyl and tell passengers not to move seat.
@4:35 after you repositioned the camera to show the seat sensor harness, the grey cable looked pinched between the seat spring/frame and the foam. Hopefully you routed new sensor cable to avoid this. A test of the old cable could confirm the fault. Good video.
@@LMAutoRepairs I checked and found I wasn't subscribed, yet this is on of my favorite channels and always look forward to your videos. I simply cannot understand how I got unsubcribed. Anyways, I'm subscribed and turned on notifications now.
Proper repair Luis . Much nicer to work with new parts and it gives you a bit more insight about the client as well . The " cheap "clients are most of the time the ones that cause you stress when something doesn´t go according to plan and we can all do with less stress .
Don’t the sensors also read occupant weight? Which is why they have a signal wire instead of just a simple make or break circuit like the seatbelt buckle? Gives a weight reading to determine the timing of airbag deployment. So bypassing sensor could throw off airbag deployment timing?
Just to take notice, passenger airbag won't go off if seatbelt is not attached. Occupancy sensor is not for blowing airbag. Seatbelt has to be on to airbag go off. If seat occupancy sensor is the only thing airbag needs to go off when crash occurs, it would most likely kill you without belt on.
I have a very good feeling that this is my Issue .. And I Plan On replacing the part , not bypassing the problem.My issue is the drivers side, don’t need a punch in the face ha Thank You again. Hopefully it is the issue ..
My airbag light came on on my 09 clubman d. A Mechanic changed the clock spring but 5 days later its come bk on. How much would it cost to get the sensors checked and repaired
@@LMAutoRepairs I have an R-59 Roadster with a passenger side air bag sensor error. The dealers won't sell a replacement mat. They had a warranty extension to 10 years. When mine went bad it was right at 10 years and mini refused to repair my car. Any idea where I can get as mat for a 2023 JCW roadster?
thanks luis proper working,i need your help i have a mercedes w204 with srs fault p275113 squib for sidebag front passenger open circuit,which bag should it be thanks a lot.
The side Airbag, I would guess is the one on the side of the seat... But I might be mistaken... Try to disconnect it under the seat, if no new faults are logged, then you know... 👍👍👍
I wish the part where you removed and replaced the leather was included. Everyone wants a couple grand to replace my seat mat sensor. Also did you ever diagnose the fault in the sensor? Curious what it might have been.
Usually they just break the circuit and start to fail... The leather is not difficult to remove, once you start to dismantle the seat, you can figure it all out... 👍👍👍
Great video again. Bro, if you do not mind I need your advice. I think I bricked my engine ecu when I tried to modify my egr map. The car is golf 5 2.0 sfi with MED9. 5.10 ecu. Now can't boot and no communication. I used ktag kess with no luck. Do you know a tool that can recover my ecu. Thanks for your help in advance.
Thanks for making the video, I have another question , I changed the mat sensor for mini cooper 2013 and after that I have error " Occupancy sensor not installed " what do think? I checked everything but airbag light still on!
@@LMAutoRepairs yes it's original and new , I checked everything , somebody told me about the reprogramming in the mini dealership , what do you think?
Not that I know of... I believe is the element that fails overtime, starting to give the wrong resistance to the little module... don't think you will find those for sale separately... 👍👍👍
The bypass is a very bad idea. E.g is the car is sold in the future without the new owners knowing about it they could put their baby car seats there 🤔
Great video 👍 When airbag light comes on some cars it's usually the front passenger seat repair disconnect yellow line plug under seat clean with isopropyl and tell passengers not to move seat.
😊
👍👍👍
@4:35 after you repositioned the camera to show the seat sensor harness, the grey cable looked pinched between the seat spring/frame and the foam. Hopefully you routed new sensor cable to avoid this. A test of the old cable could confirm the fault.
Good video.
😊
Thanks!
👍👍👍
Your videos stopped showing in my suggested feed. I had to search for your channel and watch this. Good video s always.
Make sure you subscribe and enable notifications...if you haven't already...
Thank you for watching and for your comment!
@@LMAutoRepairs I checked and found I wasn't subscribed, yet this is on of my favorite channels and always look forward to your videos. I simply cannot understand how I got unsubcribed. Anyways, I'm subscribed and turned on notifications now.
👍
Proper repair Luis . Much nicer to work with new parts and it gives you a bit more insight about the client as well . The " cheap "clients are most of the time the ones that cause you stress when something doesn´t go according to plan and we can all do with less stress .
😋
👍👍👍
Honestly I would’ve bought a new chair
Yes boss 👍 Thanks for another Sunday morning video. I always look forward to them.
😊
Thank you for watching!
👍👍👍
another good fix, another wet Sunday morning, 😊👍
🤣
Thanks!
👍👍👍
great video!! i think the fault that occured in the end to the power window has to do with internal fault in the frm
😊
👍👍👍
I wish i could like this video more than twice, thank you for the help!!
😊
Thanks!
👍👍
Don’t the sensors also read occupant weight? Which is why they have a signal wire instead of just a simple make or break circuit like the seatbelt buckle?
Gives a weight reading to determine the timing of airbag deployment.
So bypassing sensor could throw off airbag deployment timing?
Just to take notice, passenger airbag won't go off if seatbelt is not attached. Occupancy sensor is not for blowing airbag. Seatbelt has to be on to airbag go off. If seat occupancy sensor is the only thing airbag needs to go off when crash occurs, it would most likely kill you without belt on.
😊
👍👍👍
I have a very good feeling that this is my
Issue ..
And I Plan On replacing the part , not bypassing the problem.My issue is the drivers side, don’t need a punch in the face ha
Thank You again. Hopefully it is the issue ..
☺️
🤞
👍👍👍
Nice repair. Nice weather too. 🥃
🤣🤣
👍👍👍
My airbag light came on on my 09 clubman d. A Mechanic changed the clock spring but 5 days later its come bk on. How much would it cost to get the sensors checked and repaired
I think they have recall for the seat mat, they will replaced the seat mat and program
👍👍👍
@@LMAutoRepairs I have an R-59 Roadster with a passenger side air bag sensor error. The dealers won't sell a replacement mat. They had a warranty extension to 10 years. When mine went bad it was right at 10 years and mini refused to repair my car. Any idea where I can get as mat for a 2023 JCW roadster?
Weird the dealer doesn't sell you that...
They are on ebay...
👍👍👍
thanks luis proper working,i need your help i have a mercedes w204 with srs fault p275113 squib for sidebag front passenger open circuit,which bag should it be thanks a lot.
The side Airbag, I would guess is the one on the side of the seat...
But I might be mistaken...
Try to disconnect it under the seat, if no new faults are logged, then you know...
👍👍👍
My 2011 mini Cooper Clubman the airbag light just stay on in the car too.
Great video, it’s nice to see a job done properly. Thanks for making the video.
😊
Thanks, for watching and for your comment!
👍👍👍
can you load check all supplies ? i tought sometimes it could kill an ecu or something
Another great fix.👍
Thanks!
👍👍👍
I wish the part where you removed and replaced the leather was included. Everyone wants a couple grand to replace my seat mat sensor.
Also did you ever diagnose the fault in the sensor? Curious what it might have been.
Usually they just break the circuit and start to fail...
The leather is not difficult to remove, once you start to dismantle the seat, you can figure it all out...
👍👍👍
thank you
😊
Thank you for watching!
👍👍
Great video again.
Bro, if you do not mind I need your advice. I think I bricked my engine ecu when I tried to modify my egr map. The car is golf 5 2.0 sfi with MED9. 5.10 ecu. Now can't boot and no communication. I used ktag kess with no luck. Do you know a tool that can recover my ecu.
Thanks for your help in advance.
You did it through OBD?
Hi guys
Is there anyway to reset the air bag alarm fault light without a scanner?
Don't think there is...
BMW and Mini, even after the fault repaired, the light will stay on until cleared...
👍👍👍
Thanks for making the video, I have another question , I changed the mat sensor for mini cooper 2013 and after that I have error " Occupancy sensor not installed " what do think? I checked everything but airbag light still on!
Double check connections...
Was the mat a genuine one?
👍👍👍
@@LMAutoRepairs yes it's original and new , I checked everything , somebody told me about the reprogramming in the mini dealership , what do you think?
Possibly... but, have you checked wiring from the matt to the module?
@@LMAutoRepairs yeah i checked everything but the matt not working
@@aliderakhshan
I never heard of them needed to be programmed...
So, either you are missing something, or the matt you got is faulty...
Hi bro, good to see your vidéos, how much Do youb charge for a fix fault Like this for example
👍
😊
👍👍👍
Does anyone actually fix or replace those sencors
Not that I know of...
I believe is the element that fails overtime, starting to give the wrong resistance to the little module... don't think you will find those for sale separately...
👍👍👍
Hi Luís, tas fixe?
Sempre...
😋
excellent :)
Thanks!
👍👍👍
The bypass is a very bad idea. E.g is the car is sold in the future without the new owners knowing about it they could put their baby car seats there 🤔
👍👍👍
Why is the AC light flashing
Most likely no pressure on the system...
Never checked that though...
👍👍👍
please make the video as before showing all the repairs and now you just comment as if we are at the university
Watch the other videos then...
👍👍👍
This guy talk too much
Oh well...🤷♂️
At least you took something from the video...
👏