Yoshino, you are the best! Your tutorials are always so detailed, easy-to-understand, and yield fantastic results. Thank you so much for sharing your knowledge!
appreciate the video, managed to find ways to keep eyes open especially with glasses since the glare would often make them close awkwardly, been bugging me since started trying to make it work properly in its entirety. thanks a bunch for the tutorial :)
Thank you so much for this! I was having such a hard time figuring out the settings for my eyes as I have naturally big eyes and my Vtuber's eyes would go O _O every time I looked at my model hahahaha, thank you!!
So glad you made this video!! I always thought it looked different when you were showing it off, but I wasn't sure exactly how I should edit the settings.
Thank you so much. Alot of this was very helpful. I'm still having some issues with my eyes >< but you put it in the right words. She kept Pogchamping lol/
>'< ThankYOUUUUU- for making this video >'< ive been fiddling with the parameter settings for a while and was still having a somewhat hard time understanding the uses behind a few of the input and output parameters and yeah yeah, pretty much everything haha im only half way through the video and you've helped me understand a lot more than i did before and so i just wanted to say thankssss!!!! for explaining- and being easy to understand and yeah
hi! i followed your tutorial to rig my model's eyes and the blinking looks fine in L2D but when it gets to VTube studio its as if the eyelash and eyelid wont respond to me closing my eyes or even widening my eyes, but the iris completely respond to it. what can i do to fix this?
Very well done video madam keep it up , but I am still having issues with the eyes and bit and all ,especially When i don’t move the eyes still blink so does the mouth
This video helped me figure out so much stuff, thank you! Now, this might just be an issue with webcam based tracking, but I have this thing where when I physically roll my eyes downward, the software interprets this as closing my eyes. So basically, I can roll my eyes in any direction except down, then it causes my eyes to close. I don't know if there are any settings that I can adjust to make it not do that because when I look at the input parameters for Eye Closing, it does spike when I roll my eyes down. Adjusting the range only makes it harder for me to blink. I think I'm just gonna have to deal with it until I can find a used iphone or something.
Yeah that does happen because of the tracking, it also happens with iphones but not so strongly. The thing is that when you look down, your eyelids go down as if you were closing your eyes ^_^
Hi ! I have a question. If I asked my art designer to make custom heart eyes, how to put them into the app ? Does the expression pops up when you imput the keybinded expressions ? And if you put a Key for the expression, does the key is supposed to be the same for the moment you do the animation and when you stop doing it ? (Sorry for my bad english)
Love the tutorials I feel like I'm learning so much and my model already looks better than my previous attempts! One thing though, when I load my model into vtube studio the irises seem to always be looking slightly up and when I look with my eyes to the right they don't seem to track well. No problem when looking left though and I've checked all my parameters. Also my models eyelids do not blink all the way down in vtube studio even though In live2D everything with the eyes moves correctly. What might I be missing/need to take another look at? Thank you :)
Try to go in the eyes open parameter in Vtube Studio and instead of having the numbers 1 and 0 try to put something like 1.2 and 0.2 and see if it's better!
Hi! I have been following all your tutorials and I think you're the best. I have a question about my rigging, when is in modeling panel on live2d it blinks normally, but when I export it to VtubeStudio it doesn't close her eyes at all :( I followed your instructions of other comments, but still doesn't work I don't know how to fix it u.u could you help me?
I’m having some issues for when my mouth is wide open it’s completely closed. I’m having a hard time understanding how to fix that within the tutorial, how can I fix that?
I keep following your tutorials and they are the best! Question though, how do you make blush while smiling as I do not have an option for blush in the output, is something has to be done in live2D?
I'm getting a vtuber model soon and I'm hoping to be able to do sleep streams sometimes how can I keep the eyes of my model closed so it looks like it is sleeping?
You can ask your rigger to make a "tracking lost idle animation" That is a looping animation the model will play when your face is not in the tracking field anymore (you go away from the pc)
what if one eye is more closed? like when i smile one eye closes and the other stays open and ive been playing around with it but i cant figure out what to do
Your tutorials helped me to make my avatar on Live2d thank you!, but I have a problem, when importing the avatar to Vtube Studio or Animaze, the eyes stay in the middle and won't move with the head movement, help please.
Hi Yoshino! I love your tutorials and I've been following them to make my own model, I imported an unfinished version to see how it was looking into vtube studio, but the pupils are not tracking my own? Is there a parameter I'm missing in the vts controls or something?
Check in your Vtube Studio parameters if you have Eyeball X and Eyeball Y parameters! Also are you using a webcam? Usually android or iPhone tracking are better
Hello! Thanks for your tutorials, they are very helpful! May I ask when I lift my head, the mouth of the model opens. This happens all the time and even on standard models so it`s not like something wrong with my live2d model... Perhaps you know how to fix this? Sorry for my English
Hello! This probably depends on the quality of your camera :/ when you turn your head around the tracking gets less quality since it cannot see your face clearly
hi i want my model to be able to wink. i followed your eyes tutorial and I managed to separate the eye blinking in live 2d physics but it doesn't separate in vtube studio? the eye smile also doesn't work how do i fix this issue?
I hate to bother you for another question, but when I import my model into Vtube Studio, the tracking for my Eye Open are not mirrored. For instance if I close or open my left eye, facing my model, the eye on the right side closes and open. Same thing happens with my right eye. Every other motion such as the head tilts and body movement mirrors perfectly. But in order to get the eye tracking right I have to map my EyeOpenLeft input tracking to the ParamEyeROpen output tracking. Just wondering if you had this issue or if there's a setting in either Live2D or VTube Studio to fix it?
Thanks for this! The problem I have is that I close my eyes half way a lot, which translates to fully closed in vtube studio. I've messed with the settings for days and searched the internet for help but no one else seems to have this issue. Any advice?
Hello yoshino I like your tutorials a lot, I have learned a lot, but I wanted to comment that I had a problem with my avatar because when I finished it in live2d and exported it to vtubestudio, the quality changed and it became pixelated and I wanted to see it from the live2d file and Also low quality, that made me very sad but I wanted to ask if something like this has happened to you and if there is a solution to that. outside of that thank you very much and success♡.
Hello! What size is your model? Usually I make 4000x8000 canvases for my models, but I would recommend not going lower than 2000x4000 Edit your texture and check the size of it, make sure you add the items in without changing their size. Also, you can check that while you export the model, you are previewing it in full size: you can find it in Show> display quality and set it to 1
@@YoshinoArt Thank you very much for answering and the size I made was 2000x3800 with a resolution of 300. I wanted to ask you if there is a way to change or modify the quality or if not I have to do it again. Outside of that, thank you very much for responding, it is much appreciated n.n
Hello! Please make sure that the Y parameters actually went through in the VTS parameters! And if they are not there just scroll all the way down and click on the + and create them! Add Angle Y as input and whatever you need as output
It's not something you want to add in physics, because it's tracked! Please right click on your Eyeball X parameter and hit Edit parameter. Then check if the ID is EyeballX, do the same for Y!
@@YoshinoArt Yeah, it's works, i just work in 2dlive first time, i dont know which one is tracking and which one is physics, and dont know what parameter id which ios track is support
Hi i want ask, why my model eyes cannot blink seperated when i try in vtube i already make the in different param. I hope someone can give answer. Thankyou
You want to make sure that inside of Live2d your parameter Id is correct! Right click on your EyeOpenR parameter and check that the ID is EyeOpenR Do same thing for the left one Once you checked this, make sure that inside Vtube studio, in the parameter list (where head rotation, body rotation, mouth etc are) you have your eyes parameters, if you don't have them, scroll all the way down and create them by clicking on the + icon. Put Eye R Open as input and output and you're done!
Hello Yoshino! I have a question, I've been working, rigging some models, and sometimes when rigging the mouth, the skin on the mouth, doesnt match the skin color of the face (because the skin is like a gradient of many colors) how can I work around this? Any tips are appreciated, thank you so much!
Heyo! So some things I do when this happens are 1) have separate layers for lip skin and lipstick 2) have the lip skin sides blurred a bit and not with hard edge
Ma scusa, ci sono già migliaia di persone che parlano inglese e hanno più views. E te che sei Italiana e si sente DI BRUTTO, ti metti a fare tutorial in inglese? 🤦🏻♂️ La community inglese, ha fin troppe persone che spiegano pure come costruire un razzo spaziale. Invece la community italiana è sempre quella più svantaggiata. E giustamente te ti metti a parlare inglese per avere più ascolti. Risultato: 3000 follower. I'm laughing :D
Hey I have a question for you. I'm new to vtube studio, is there a way to combine expressions? For example, the rigger gave me a bunch of different parts like eyebrow toggles, pupil toggles, ect. Can i set say, an angry expression that auto toggles both the angry brows+ eyes at the same time?
Your tutorials are the only tutorials that actually helped me understand live2d I would have been so lost without you
Yoshino, you are the best! Your tutorials are always so detailed, easy-to-understand, and yield fantastic results. Thank you so much for sharing your knowledge!
Very helpful. I was having trouble figuring out my parameters, and I think I finally got the mouth movements working well thanks to your video!
your laugh is so---🛐🛐
appreciate the video, managed to find ways to keep eyes open especially with glasses since the glare would often make them close awkwardly, been bugging me since started trying to make it work properly in its entirety. thanks a bunch for the tutorial :)
You posted this over two years ago but it has helped me today
THANK YOU finally fixed my mouth problems y-y once i had that part set to 0.8 it all finally moved way better then before.
OH MY- THANK YOUUU!!! now there is +1 new vtuber in the comunety thanks to you :D
Good job!!
Thank you for this tutorial! I was having such a hard time figuring this out!
Wow! Thank you so much for this guide I was looking for fix these exact problems!
THANK YOU! I was lowering my output stuff trying to make it effective xD
Yoshino you are hands down the best! Your tutorials are amazing! Thank you so much for everything 💖
Finally fixed my mouth respons problem.
Thank you so much for this! I was having such a hard time figuring out the settings for my eyes as I have naturally big eyes and my Vtuber's eyes would go O _O every time I looked at my model hahahaha, thank you!!
So glad you made this video!! I always thought it looked different when you were showing it off, but I wasn't sure exactly how I should edit the settings.
I admire you,you re the great/best,you have talent,Have a terrific fantastic day
Thank you so much! I love how in-depth, yet simple your explanation is!
Pog Tutorial 🤝
Thank you so much. Alot of this was very helpful. I'm still having some issues with my eyes >< but you put it in the right words. She kept Pogchamping lol/
This is really help me a lot!Thank you!!!
Your tutorials are so good and nice,it fixes many thing in me rigging.
GOOD TUTORIAL EASY TO UNDERSTAND THANK YOU SO MUCH ;D
This is such a detailed tutorial. Thank you! A question: can we add customized expressions? 🤔
Hello! I show it at 10:53 💖
@@YoshinoArt oh i missed that! Thank you so much! 🤩
Thank you i figured it out with your help
Thanks that is super helpful. All your tutorials are. thank you!
This is a great video, i was going crazy with my Vtuber having her eyes half closed when mine where fully open and it also did the open mouth thing.
thank you sooo much for this tutorial, you TRULY helped me out with my first model!!!
Thanks for this video! This helped with fine tuning a lot!
AAA THANK YOU! you're a life saver!
Very helpful thank you so much this fix many of my problems
>'< ThankYOUUUUU- for making this video >'<
ive been fiddling with the parameter settings for a while and was still having a somewhat hard time understanding the uses behind a few of the input and output parameters and yeah yeah, pretty much everything haha
im only half way through the video and you've helped me understand a lot more than i did before and so i just wanted to say thankssss!!!!
for explaining-
and being easy to understand
and yeah
You're welcome!! Hehe i try my best to make my videos beginner friendly
Very useful! Thankyou!
hi! i followed your tutorial to rig my model's eyes and the blinking looks fine in L2D but when it gets to VTube studio its as if the eyelash and eyelid wont respond to me closing my eyes or even widening my eyes, but the iris completely respond to it. what can i do to fix this?
Very well done video madam keep it up , but I am still having issues with the eyes and bit and all ,especially When i don’t move the eyes still blink so does the mouth
So helpful as aallways yoshino!
Thank you, sensei!
This was a super super helpful video thank you so much ❤️
I absolutely love your videos, and damn they should have gotten more views cos those are absolutely awesome!
You have to change the input of the Eye Y parameter ^_^
Try to increase the number on the top, it should work
@@YoshinoArt thank you
Very good tutorial! Thank you very much for this ♡´･ᴗ･`♡
this was so helpful thank you so much !!! Did you ever mess around with the tracking settings as well as camera settings?
This video helped me figure out so much stuff, thank you!
Now, this might just be an issue with webcam based tracking, but I have this thing where when I physically roll my eyes downward, the software interprets this as closing my eyes. So basically, I can roll my eyes in any direction except down, then it causes my eyes to close.
I don't know if there are any settings that I can adjust to make it not do that because when I look at the input parameters for Eye Closing, it does spike when I roll my eyes down. Adjusting the range only makes it harder for me to blink.
I think I'm just gonna have to deal with it until I can find a used iphone or something.
Yeah that does happen because of the tracking, it also happens with iphones but not so strongly. The thing is that when you look down, your eyelids go down as if you were closing your eyes ^_^
Muy útil tu video, gracias por tu aporte. Un saludo.
wow, thanks YoshinoArt for your video. A question: My character can't close her eyes. May I miss something? I hope you can help. Thank you.
Hello! Try to increase the lower number in the eye blink input!
TY whenever I streamed and speaker, the tracking didn’t even work the mouth just moved up and down, now it doesnt
Hi ! I have a question. If I asked my art designer to make custom heart eyes, how to put them into the app ? Does the expression pops up when you imput the keybinded expressions ?
And if you put a Key for the expression, does the key is supposed to be the same for the moment you do the animation and when you stop doing it ? (Sorry for my bad english)
Awesome!
Thank you for your kind explanation. It helped me a lot. What settings should be used to automatically move the eye highlights in Vtube Studio?🥺
Hello! The way I make eyes is explained here Part 1 ruclips.net/video/uc5h-fXCTmQ/видео.html
Part 2 ruclips.net/video/j9q_n9XIAvI/видео.html
the left eye from my model is like a sleepy eye but the right one is big, and i still dk how to fix it..
Love the tutorials I feel like I'm learning so much and my model already looks better than my previous attempts! One thing though, when I load my model into vtube studio the irises seem to always be looking slightly up and when I look with my eyes to the right they don't seem to track well. No problem when looking left though and I've checked all my parameters. Also my models eyelids do not blink all the way down in vtube studio even though In live2D everything with the eyes moves correctly. What might I be missing/need to take another look at?
Thank you :)
Try to go in the eyes open parameter in Vtube Studio and instead of having the numbers 1 and 0 try to put something like 1.2 and 0.2 and see if it's better!
How do I reset all the configurations I did? My models eyebrow is frozen and I don’t know how to fix it
Hi! I have been following all your tutorials and I think you're the best. I have a question about my rigging, when is in modeling panel on live2d it blinks normally, but when I export it to VtubeStudio it doesn't close her eyes at all :( I followed your instructions of other comments, but still doesn't work I don't know how to fix it u.u could you help me?
Does this also work with chibi style characters (more specifically gacha)
I’m having some issues for when my mouth is wide open it’s completely closed. I’m having a hard time understanding how to fix that within the tutorial, how can I fix that?
Hi, I'm having trouble with the mouth opening. I tried looking it up, but no one seems to have a solution. 😔
I keep following your tutorials and they are the best!
Question though, how do you make blush while smiling as I do not have an option for blush in the output, is something has to be done in live2D?
I show it at 9:49 , but to have something show up in the output, it means you made a Parameter in Live2d for it ^_^
Can someone please help me the eyes are closed when mine are open and open when mine are closed 😭😭😭idk how to fix this I spent so long on this model
Hello Yoshino! I have an issue with my eye balls, my camera is not capturing the eye balls movement? I don't know what could be the problem. ;;
I'm getting a vtuber model soon and I'm hoping to be able to do sleep streams sometimes how can I keep the eyes of my model closed so it looks like it is sleeping?
You can ask your rigger to make a "tracking lost idle animation"
That is a looping animation the model will play when your face is not in the tracking field anymore (you go away from the pc)
@@YoshinoArt thank you I have sent a message to my rigging person and he said he will add that for no extra cost
what if one eye is more closed? like when i smile one eye closes and the other stays open and ive been playing around with it but i cant figure out what to do
Your tutorials helped me to make my avatar on Live2d thank you!, but I have a problem, when importing the avatar to Vtube Studio or Animaze, the eyes stay in the middle and won't move with the head movement, help please.
I fixed it, I still had an eyeR that I forgot to delete after duplicating the EyeL
Hi Yoshino! I love your tutorials and I've been following them to make my own model, I imported an unfinished version to see how it was looking into vtube studio, but the pupils are not tracking my own? Is there a parameter I'm missing in the vts controls or something?
Check in your Vtube Studio parameters if you have Eyeball X and Eyeball Y parameters!
Also are you using a webcam? Usually android or iPhone tracking are better
@@YoshinoArt I see! I will try these, thanks so much ❤️
Hello! Thanks for your tutorials, they are very helpful!
May I ask when I lift my head, the mouth of the model opens. This happens all the time and even on standard models so it`s not like something wrong with my live2d model... Perhaps you know how to fix this? Sorry for my English
Hello! This probably depends on the quality of your camera :/ when you turn your head around the tracking gets less quality since it cannot see your face clearly
hey yoshino, can you help me about the mouth that dont match with my rl mouth.
like when im say A or I the shape of mouth is diferent
hi i want my model to be able to wink. i followed your eyes tutorial and I managed to separate the eye blinking in live 2d physics but it doesn't separate in vtube studio? the eye smile also doesn't work how do i fix this issue?
I hate to bother you for another question, but when I import my model into Vtube Studio, the tracking for my Eye Open are not mirrored. For instance if I close or open my left eye, facing my model, the eye on the right side closes and open. Same thing happens with my right eye. Every other motion such as the head tilts and body movement mirrors perfectly. But in order to get the eye tracking right I have to map my EyeOpenLeft input tracking to the ParamEyeROpen output tracking. Just wondering if you had this issue or if there's a setting in either Live2D or VTube Studio to fix it?
That is more or a flaw because how i rig, but switching the inputs of the two eyes in Vtube Studio is just fine!
Thanks for this! The problem I have is that I close my eyes half way a lot, which translates to fully closed in vtube studio. I've messed with the settings for days and searched the internet for help but no one else seems to have this issue. Any advice?
Take the top number in the eyes input and lower it :)
11:55 Sus Ahegao
My model thinks I'm smiling when I'm scared and I look like a psycho when I play horror games lol. Any advice?
Hello yoshino I like your tutorials a lot, I have learned a lot, but I wanted to comment that I had a problem with my avatar because when I finished it in live2d and exported it to vtubestudio, the quality changed and it became pixelated and I wanted to see it from the live2d file and Also low quality, that made me very sad but I wanted to ask if something like this has happened to you and if there is a solution to that. outside of that thank you very much and success♡.
Hello! What size is your model?
Usually I make 4000x8000 canvases for my models, but I would recommend not going lower than 2000x4000
Edit your texture and check the size of it, make sure you add the items in without changing their size.
Also, you can check that while you export the model, you are previewing it in full size: you can find it in Show> display quality and set it to 1
@@YoshinoArt Thank you very much for answering and the size I made was 2000x3800 with a resolution of 300. I wanted to ask you if there is a way to change or modify the quality or if not I have to do it again. Outside of that, thank you very much for responding, it is much appreciated n.n
@@shoany1984 if you made the drawing in that size there is no way to automatically enlarge it ;v;
is this app just for 2D model ?
is it going to work with 3D model?
For 3d models many use VSeeFace ^_^
any tips on syncing eye lid movement so i dont randomly have one closed eye?
put the two eyes with the same input! so instead of having eyeRclose and eyeLclose, put them both on only R or L
@@YoshinoArt thank you
Hi for some reason none of my y axis movements are registering on my model.
Hello! Please make sure that the Y parameters actually went through in the VTS parameters! And if they are not there just scroll all the way down and click on the + and create them! Add Angle Y as input and whatever you need as output
hi!, i have a question! I set the eyeballs XY and blinking, however, it cant to track when i export to vtube studio, is it need to set physic?
It's not something you want to add in physics, because it's tracked! Please right click on your Eyeball X parameter and hit Edit parameter. Then check if the ID is EyeballX, do the same for Y!
@@YoshinoArt Yeah, it's works, i just work in 2dlive first time, i dont know which one is tracking and which one is physics, and dont know what parameter id which ios track is support
@@ronaldlee5324 You can find that info in Vtube Studio official documentation ! github.com/DenchiSoft/VTubeStudio/wiki/VTS-Model-Settings
@@YoshinoArt thank you
Hi i want ask, why my model eyes cannot blink seperated when i try in vtube i already make the in different param.
I hope someone can give answer.
Thankyou
Hello, maybe you want to check my eyes rigging tutorial? ruclips.net/video/uc5h-fXCTmQ/видео.html
@@YoshinoArt thankyou i will check
Hello! Can I ask why is it my eye X is looking at the opposite direction in vtube studio, while it's normal at live 2d >_
try to invert the eye x numbers! so put -1 instead o 1 and 1 instead of -1
@@YoshinoArt thank you sensei!! ^ω^ have a nice day!
my mouth only opens if i open my mouth super wide
Lower the top number in input of mouth open, like i show in the video ^_^
HELP PLEASE, my eyes dont open, on the other programs it works but here it doesnt
You want to make sure that inside of Live2d your parameter Id is correct!
Right click on your EyeOpenR parameter and check that the ID is EyeOpenR
Do same thing for the left one
Once you checked this, make sure that inside Vtube studio, in the parameter list (where head rotation, body rotation, mouth etc are) you have your eyes parameters, if you don't have them, scroll all the way down and create them by clicking on the + icon. Put Eye R Open as input and output and you're done!
@@YoshinoArt tysm!
Hello Yoshino! I have a question, I've been working, rigging some models, and sometimes when rigging the mouth, the skin on the mouth, doesnt match the skin color of the face (because the skin is like a gradient of many colors) how can I work around this? Any tips are appreciated, thank you so much!
Heyo! So some things I do when this happens are
1) have separate layers for lip skin and lipstick
2) have the lip skin sides blurred a bit and not with hard edge
Ma scusa, ci sono già migliaia di persone che parlano inglese e hanno più views. E te che sei Italiana e si sente DI BRUTTO, ti metti a fare tutorial in inglese? 🤦🏻♂️ La community inglese, ha fin troppe persone che spiegano pure come costruire un razzo spaziale. Invece la community italiana è sempre quella più svantaggiata. E giustamente te ti metti a parlare inglese per avere più ascolti. Risultato: 3000 follower. I'm laughing :D
The best thing about this all is that my first negative comment is from an Italian person! 🤩
I gotta celebrate this tho ✨
Hey I have a question for you. I'm new to vtube studio, is there a way to combine expressions? For example, the rigger gave me a bunch of different parts like eyebrow toggles, pupil toggles, ect. Can i set say, an angry expression that auto toggles both the angry brows+ eyes at the same time?
Add the two expressions and then just put them to trigger with the same hotkeys!