E-bike hall sensor with ebike tester
HTML-код
- Опубликовано: 5 окт 2024
- Ebike Testing Device: amzn.to/43sTPbS
Bridgold 10pcs 41F/0H41/SH41/SS41F/S41 Ratiometric Linea Bipolar Hall Effect Sensors Chip,3Pins: amzn.to/3IH9WKY
Ebike Tester used to check the Hall Effect Sensors in this video.
The e-bike motor needs 3 channels in order to work. I was missing 1 channel.
My bike would power the motor for a few seconds and then cutout, I would have to throttle off then twist the throttle again to get power.
I used the E-bike Tester and found hall sensor not working.
My problem was corrosion, which caused one of the sensor legs to open the circuit, thus giving the controller a fault.
Motor, controller, brake lever, phase angle, winding, Hall
With Self-Check Function
Plug the Hall plugs of the bike harness together, turn on the power, and the power indicator/controller 5V power indicator light will be on, and the Ha/Hb/Hc lights will flash cyclically, otherwise there is a fault.
Follow directions to find your problem.
You have to be very intelligent to do this kind of work Nice very nice 👍
thank you
a must for ebike repair.
/bklyn 👑
I fully agree
Buy me a Coffee - bmc.link/CharlieD954 ☕
अपना नंबर दीजिए