Make Resin Figure from The Silicone Mold, Resin Statue Factory

Creating a resin figure from a silicone mold can be a fun and creative project. Here are some basic steps to follow:
szrddm.cn/how-...
Create a model: First, you need to create a model of the figure you want to cast in resin. This can be done using clay, wax, or any other material that can be sculpted.
Make a silicone mold: Once you have your model, you can create a silicone mold of it. Apply a mold release agent to the surface of the model to prevent the silicone from sticking. Then, mix the silicone and pour it over the model. Allow the silicone to cure before removing the model.
Prepare the resin: Choose a resin that is suitable for casting collectible figures, and follow the instructions to mix it. Add any pigments or additives to the resin as desired.
Cast the resin: pour the resin into the mold, filling it to the top. Use a toothpick or similar tool to remove any air bubbles that may have formed.
Cure the resin: Allow the resin to cure completely. This may take several hours or even a few days.
Demold the figure: Once the resin has cured, remove it from the silicone mold. You may need to flex the mold to release the figure. Clean and finish: Remove any excess resin or flash from the figure, and sand or polish it as desired. You can also paint or decorate the figure at this stage.
With these steps, you should be able to create a beautiful resin figure from a silicone mold. Good luck with your project!
#resinfigures #polyresinfigurines #collectiblefigurines #resinstatue #resinfigurines #resinstatuemaker #resinfigurefactory

[@locroadster7772]

võ khuôn làm bằng đất sét phải không ạ

[@gumasshop]

And what additives do you use with polyester resin ? Besides the powder? Thanks for the answer!

[@szrddmcustomtoy]

Hi, thanks for following our videos, I'm afraid I can't give you an accurate answer to this question.