@@Junji101 Its possible, i already have the answer from reddit. you just have to solder a 56k Resistor to allow 0,5A - 22k for 1,5A and 10k for 3A between on of the CC Lines and V. I tried it with 56k and it works perfect.
This person should have connected two pairs of + and - so the usb c could be plugged in either way. The way this video was done could not have worked. The two pins on the end are - and + is the 4th pin in from each side. The way this was wired on the video would have caused a direct short circuit whenever something was plugged in. Hopefully it wasn't important because it's probably broken now.
@@sarvagnaraval5529 Yes I understand haha... I mean, it would be great if you start videos on teaching beginners how to user the multimeter and how to understand the PCB
Which two pins carry data on the back of usb-c port? I have the lenovo yoga book YB1-X90F Which comes a older type USB Micro used both charging it and data transfer apart from mini HDMI port & 3.5m headphone jack it need the update hack used in your video but I do identifie data connection too Thanks
Nice video, Bro can you please tell me I want to change y Romoss 25000 sense 9 power bank port from micro to type C, is it safe? Will it works as it is lie now? Just to place type c with micro and thats it?
Dekho bro.. maine yeh banaya to thha lekin ise Phone mai karna thoda mushkil hai.. kyoki I am not a professional . 😉😉 But in future I will try it .... Please support my channel to complete 1000subscribers I will try this in this month so stay tuned👌👌🤞🤞😀🙏🙏🙏
Hey , i just connect two wires with main usb port which is output port so we don't need to add resistors .... Also I Have An Electronic Engineer at my home 😉
@@sarvagnaraval5529 emberrassing for him not to tell you how to do it properly and then posting not working shit to youtube and acting like you did great
Why are you eat with folk instead of hand? Lol just kidding... I wear gloves to make my video more professional... 🙂 Hope you like my video please subscribe bro ... Namaste 🙏
Very nice pulling old micro usb with piler without worrying about poor little contact of pcb
Yes when you are confident in your skills😂✌️
CC1 & CC2 need to be connected to GND with 5.1K Resistor for usb-c to usb-c charging.
do you know what resistors i need for output? want to replace usb a output with usb c
@@socke4306 I don't think it's possible to replace for output that way because you would need a chip to do the communicating for power
@@Junji101 Its possible, i already have the answer from reddit. you just have to solder a 56k Resistor to allow 0,5A - 22k for 1,5A and 10k for 3A between on of the CC Lines and V. I tried it with 56k and it works perfect.
@@socke4306 Oh cool. Thanks for letting me know. I had a misconception that it was more complex than that. Learn something new everyday.👍
@@socke4306Aliexpress sells for 0.11€ USB-C connectors with built-in 5.1k resistors 👍
мне сегодня идея пришла а почему бы не поменять на type-c начал искать и наткнулся на вас,мне нравится идея,супер!!!!💪👍
Glad you think so...😄 Btw don't forget to subscribe 😄
Very satisfying video.
As I can see, you have only 2 pin on the circuit board. If I have the classic 5 pin, which ones I need to solder to the 2 cables
It's So Simple.....First u need to find + and - pin with multimeter.. and when you find it just solder wires with it and it will done 👍
This person should have connected two pairs of + and - so the usb c could be plugged in either way. The way this video was done could not have worked. The two pins on the end are - and + is the 4th pin in from each side.
The way this was wired on the video would have caused a direct short circuit whenever something was plugged in. Hopefully it wasn't important because it's probably broken now.
Some female USB C ports with 4 pin shorts the pins so that's not necessary. Simpler work.
Nice
How can you identify the + and - on the board itself?
I used multimeter to identify it. Btw don't forget to subscribe 😄
@@sarvagnaraval5529 Yes I understand haha... I mean, it would be great if you start videos on teaching beginners how to user the multimeter and how to understand the PCB
Which two pins carry data on the back of usb-c port? I have the lenovo yoga book YB1-X90F Which comes a older type USB Micro used both charging it and data transfer apart from mini HDMI port & 3.5m headphone jack it need the update hack used in your video but I do identifie data connection too
Thanks
where you able to mod your book. I am watching this video hoping to do the same with mine as well.
nice work!!
Hi sir. In the board, how to know which one is positive and negative ? This one have two terminals but mine have 5 of them.
Can you text me the timeline? ... Which you want to say ..
Bro we have to connect last two pin of bath side?
Very nice
Thanks ( dhanyawad )🙏
@@sarvagnaraval5529 MP
Nice video,
Bro can you please tell me I want to change y Romoss 25000 sense 9 power bank port from micro to type C, is it safe? Will it works as it is lie now?
Just to place type c with micro and thats it?
Yes 100%
My friend is using this now.... You can trust...do all connections as shown in video
Working or not?
Yes bro 100%
I will also try it
@@thakurranjeet020 wow 😁😁 good luck
bhai kya ham aisa kisi smartphone main kar sakte hai
bataoge please.......................
Dekho bro.. maine yeh banaya to thha lekin ise Phone mai karna thoda mushkil hai.. kyoki I am not a professional . 😉😉 But in future I will try it .... Please support my channel to complete 1000subscribers I will try this in this month so stay tuned👌👌🤞🤞😀🙏🙏🙏
Thanks for your suggestions 😃🙏🙏
@@sarvagnaraval5529 you're most welcome !
And thanks for reply my comment.
aur bro mai pahle se aapka subscriber hoon.
@@MdAsif-gp9ry THANK YOU SO SO SO SO MUCH FOR YOUR SUPPORT 🙏🙏😁🤩🤩🤩❤️❤️
@@MdAsif-gp9ry sorry for late reply 😞😁
it should not work, you need to add resistors
Hey , i just connect two wires with main usb port which is output port so we don't need to add resistors .... Also I Have An Electronic Engineer at my home 😉
@@sarvagnaraval5529 emberrassing for him not to tell you how to do it properly and then posting not working shit to youtube and acting like you did great
Quality content 🔥🔥🔥
Can you change my phones port to type c
Yes , but it's not my buisness 😂
Why are you wearing gloves
Why are you eat with folk instead of hand? Lol just kidding... I wear gloves to make my video more professional... 🙂 Hope you like my video please subscribe bro ... Namaste 🙏
Micro usb connector jaise ukhada🥲