How to Make Bluetooth Controlled Arduino robot car

This video shows how to make an arduino car controlled by a Smartphone in 10 mins!!
This video contains all the necessary details. Also i have shown all the connections with circuit diagrams in the video. I have tried as much as I can to give every little description. If you have any question write in comments and i will try my best to answer them accurately.
Like, comment and subscribe my video if you found this helpful.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
Materials required:
1. Any car chassis kit ( with BO motors, wheels and base )
I bought this kit- amzn.in/cMSnMTL
2. Arduino UNO
3. L298 motor drive
4. Hc-05 bluetooth module
5. two batteries ( I used Samsung 18650 rechargeable cell , 3.7V
and 2600 mA both)
Link: amzn.in/4j4RXI5
6. Jumper Wires
7. Electrical instruments ( Solder wire and iron )
8. mobile with bluetooth
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
Get the code here:
pastebin.com/bfKg6tYN
Download the app:
play.google.com/store/apps/de...
You can also read the guide here:
www.instructables.com/id/Ardu...
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
Music credits:
• Elektronomia - Sky Hig...
• JPB - High | Trap | NC...
• Electro-Light - Symbol...
Music by / ikson

[@renesoma3159]

This is super cool since every other tutorial uses an Arduino motor shield instead of the motor drive you use, and that's the one I have.
I send you a big thank you from the other side of the world! Or, as we say here in México: Muchas Gracias!

[@AnmolSahuYt]

thanks alot from other side of world! Or, as we say in India: dhanyawad!

[@satishpatel8461]

Is there any benfit of using drive instead of drive?

[@uv9273]

Contact number pls

[@zago_ff3518]

I see it two years later and it worked for me thanks bro

[@adarshsurendran7648]

This is a new knowledge that two motors can be connected in parallel and then connect to the motor driver , in that way four motors can be controlled using a motor driver . Thanks a lot

[@AnmolSahuYt]

Your welcome!

[@raniguptaswaritgupta4747]

Ya !!! I am here to see this only.....how can we connect 8wires to only 4 terminals.....🤔🤔
Once again thanks to you bro😃

[@sumedhafernando4723]

the car works very well thanks for the code

[@fabiodesallespereira7977]

Congratulations on your design,simple and very easy.

[@AnmolSahuYt]

thank you :)

[@kanishpachoriya7222]

Thank u sir apne wajah se mene yeh project bna lia me bhote pareshan ho gya tha video dekh dekh kar par apki video dekhi ek hi baat me samajh aa gya usi ki help se bna liya thank u sir apki coding we bilkul sahi h 💖 😊😊🥳

[@AnmolSahuYt]

Very happy for you Kanish! :)

[@pranavsonvane2081]

Best tutorial out there!!

[@AnmolSahuYt]

Thanks!

[@sanjaychoudhary3710]

Very good man. Hope you never die. You will surpass 1 million suscribers

[@AnmolSahuYt]

Thanks for you wishes

[@geetarani1065]

nice work worked for me

[@fz5743]

Thanks it actually now working I would suggest to stick a power to the Arduino

[@AnmolSahuYt]

your welcome bro! Happy to help :)

[@diptadhar5151]

Thank you so much bhai. It's working 100%

[@AnmolSahuYt]

your welcome ^^

[@asiruddinahamed8667]

Nice,it's working bro

[@rider46ofowncreationowncre4]

Thanks it's working I tried

[@AnmolSahuYt]

your welcome bro :)

[@sandinparul]

Thk sir you are tu great

[@makerbrothers8662]

Mera ban gaya thanks for the help 😀😀

[@AnkitKashyap-fc5ov]

Bhai photos send

[@shivanshdubey2124]

All the best for your venture

[@AnmolSahuYt]

thank you bro :)

[@rew4rdexfrewreqrq493]

ti is super , this made easy thnks

[@JesusGamayon]

Thanks for sharing, my friend!

[@AnmolSahuYt]

your welcome :)

[@fungallery6979]

Thanks i working

[@ranasingh6429]

Thanks ji. Very nice video ji.

[@narduinouno9196]

Best video bhai please upload weekly - by naitik

[@AnmolSahuYt]

thank you bro!

[@a.brathnayakerathnayake4636]

Oh thanks man you are like God for me bros

[@AnmolSahuYt]

your welcome :)

[@aaravraj9943]

thanks itis working!!!

[@monarulislammithu7818]

help please,,,,when i power l298 then bluetooth module after a sometime was disconnected and when i power by arduino with laptop then it recieve data but motor don't spin but in the same pin led work properly,,,,

[@yassinemekaoui6089]

well done

[@MyTechStudioOfficial]

WELL DONE

[@darkhertz7247]

Thank u bro very very much i cant tell u how helpful u were for me ,this worked extreamly awesome once again yr ur great and thank u very much

[@AnmolSahuYt]

your welcome. Happy to help :)

[@janiruarduino4086]

thanks

[@mdkhobaib3247]

Wow really it's working

[@relaxingandrefreshingvideo801]

what us the battery u used .can i use 12 v battery?

[@zaidm.owais-1884]

Bro we have made it for our science exhibition and it's not working please help us 🙏

[@prateekmtr898]

bhai hc-05 bluetoothse kese connect hoga pairing regected likha aarha h mobile ke saat

[@ManjuKumari-bm9eh]

@@zaidm.owais-1884 Bro learn programming.They are shit for softwares (they give wrong software)

[@ShirjeelAliHaider]

how to connect motor driver l293d for this project ...can you please tell the labeling of those four wires which you have taken from the motor driver

[@saketsatyarthi8523]

You are best.

[@AnmolSahuYt]

thanks :)

[@saketsatyarthi8523]

@@AnmolSahuYt That's OK, this video helped me a lot in my project. Keep making these type of videos.

[@singupatiaditya1576]

hey did you worked on any advancements of this model like using voice or mind

[@martynyoungs1514]

I am a beginner so dumb question! You show the wiring for the motors with black and red. Does it matter which way round as long as keep the same for all four motors as my car goes round in circles. Thanks.

[@jumbo999614]

How come you don't need voltage divider for Aduino TX pin to Bluetooth RX pin?

[@savithasavi9238]

can we connect 12v battery and 12v motor

[@markmark5000]

with same car you can make line follower by just removing bt module and putting 2 ir module on both sides (left , right car k nicchay) and uplodeing new code to aurdino uno it'll work and follow black line if you will use colour module it'll work on all colours but coding will be much more complicated try karnA 🥰.
~ swayam sahu

[@pradeepk.v5718]

Super brother

[@NirunPro]

Bro my pleasure

[@thoomsankalp7792]

Which battery should we use for this

[@mimix2070]

It's working :)

[@nishanth8536]

Yes it's real

[@rajputsajjan1936]

Hi..
I will try.. But it's not working...
Give me solution....

[@gihanchanuka582]

super bro

[@ahmedjahangir8888]

what is done with the battery part pls explain where do u put it

[@nargisanjum1293]

Bro We can use hc-06 if I use hc-06 the circuit is same or different

[@saisree2584]

We can use 4v battery

[@yogendrayadav4568]

Wow bro

[@hinaimran4104]

Brilliant Aweskme

[@mayanksah2502]

Sir we can use 9v batery also

[@ibrahimhayee7126]

Is button connected with the motors

[@pmanoj8994]

beautiful

[@AnmolSahuYt]

thanks :)

[@amarsainath469]

I have attached everything but its not working as you mentioned.Like not moving even a single inch

[@dianasaldanha7627]

Which App did u use for programming??

[@nagendraray8221]

dami bro

[@reenasingh1682]

Can we use L298N motor Driver Instead of L298

[@r__228ravi4]

Can I use H.w battery

[@04_aryachandak17]

thank you uncle. you are very good thank you
uuuuuuuuuuuuuuuuuuuuuuuuu

[@AnmolSahuYt]

call me bhaiya though! xD

[@04_aryachandak17]

@@AnmolSahuYt ok bhaiya

[@ig_hrv96]

@@AnmolSahuYt hii

[@lalitham.p4231]

Can i use an arduino nano instead

[@vishnunambiar735]

can we use any type of motor drive??

[@zaidahamed1593]

Bro do videos continuously and keep trying

[@AnmolSahuYt]

Thanks for motivating! 🤩

[@bharathbhat880]

will it work on 9V Battery

[@MAXRizoel]

Nice

[@Odiatraveller_somesh5784]

Bro can we use HW 9v battery instead of the cell

[@vxt4410]

Okay so at first I said it wasn't working. But turns out there were two clips missing from my L298N. I reinstalled them as they were loose inside the package it came in. After that everything worked like a charm until the HC-06 started to disconnect the moment I pressed a button on my phone. But I believe the solution to that problem will be to replace the battery as it most likely out of juice from all the test runs.

[@hiteshyadav9100]

Nice but
1 questions

[@rpworld7042]

My circuit is working.

[@sukantamondal8982]

Can ve connect 9v battery

[@sumedhafernando4723]

I have a question, will it wort with a joystick shield can you make for me and share code pls.

[@Arduino_oyun]

the code cant be seen in the video(the part below) and the pastebin site doesnt work. i did all the car correctly but i dont have the codes. can sb pls send them if they can have acces to pastebin or the codes?

[@AVENGERS__23]

my bluetooth is connecting but the wheel are not moving

[@marklee1907]

Hi, I according your code and diagram build the car, but no response, Pls Would mind advice me.

[@Cobragaming462]

Sir can we use 4 clock/remote batteries.plzz reply fast

[@AlExpertLyrics]

HC-05 bluetooth module keeps turning off??

[@tushardalvi1136]

I have One query.May I come to know how to connect/start without cable.Waiting for your reply .

[@minimilitia4677]

Where we get complete circuit diagram

[@beenavkrishnan200]

How much volt is needed to the motor driver? Can I give 12 volts

[@electroniclab9388]

battery how much volts

[@creativehackerguy3074]

Can we use any other android app to control the car?? Please say

[@arpanuprety5770]

Sir how much volt of battery is essential for this

[@JoiakimRai]

I can't connect to my bluetooth module HC-05. Please help me.

[@anishali1234]

Sir can we controller with voice

[@sandeeppai609]

Instead of bo motar can we use 300rpm motar

[@AnmolSahuYt]

it must turn easily and should not consume too much power. remember you have to run 4 wheels.

[@vishalutekar2993]

Which language code Ur using in it

[@kiruthikarahul3935]

Bro you want to put an video that how to make drone

[@ShirjeelAliHaider]

code isnt working ... i am using arduino mega 2560 so will use the same pins 9 10 11 12 ?or any other plz guide

[@minimilitia4677]

Where we get diagram of that

[@priyankbhole851]

can you please guide how to choose battery for RC car or boat or plans

[@AnmolSahuYt]

it depends on what components you are using. Like if you are making RC car from arduino then preferred voltage range is (

[@notme8620]

hey where is the library file?

[@facebookofficial9266]

My motors are running only forward..

[@samarthsinghal2743]

Next video kab aa rahe hai bro😎

[@syedhassanshah1681]

bro when i give supply it run auto and did not work with bluetooth and bluetooth is already connected wit phone plz help me

[@CrimsonRoblox]

Hey how to do arduino coding for seed sowing robot. I only want it to move just forward. Ultrasonic Sensor can be used to detect if obstacle infront and then will stop. While moving, servo motor spins the wheel dispenser to dispense seeds one by one to be planted and also infra-red proximity sensor to detect seeds dropping. Also the Bluetooth Sensor too to control robot and Soil Moisture Sensor to sense soil if wet or not.
I'm horrible at these bcs I only know tiny few of Arduino but it's my school project if not I fail

[@facundomartinez5091]

Hola el acelerómetro no me envia datos al arduino pero las demas opciones si ¿Por que?

[@taniaakter7976]

Can i use another app

[@LedgerPlayz]

my code is not Uploading i selected right board and right port as well

[@ibrahimhayee7126]

How is the button connected is it connected with the battery

[@AnmolSahuYt]

just add button in circuit in series.

[@abbishekkdgs3161]

Its working perfectly

[@abbishekkdgs3161]

@@harshitathiya7278 yeah i can help u
But i cant give my contact

[@saisree2584]

@AGS crew Bluetooth is not lightening

[@saisree2584]

And while dumping showing errors at com3 port not available

[@abbishekkdgs3161]

@@saisree2584 ur bord is problem

[@saisree2584]

But Aurdino is lightening

[@akshatkusingh]

mera wala kaam nai kiya
upaay bata

[@pratapsahoo4433]

Bro 3.7 volt two mobile battery chalega na ? working hoga na nahin hoga plz reply me bro......

[@mohammedalif6396]

I have done everything showed here,still,my car is not moving.What might be the possible cause?
Arduino got power,Motor driver light is also on,Hc-05 is blinking.Actually,where did i make mess?
And,after uploading my code to arduino,can i check through serial monitor,whether it is getting connection or not?
Cause,after uploading,when i am going to check in serial monitor,it is blank.

[@ganeshmore2252]

Bhaiya aap kahape rehte Ho plz bata do na

[@KrishnaKrish-bt7hp]

Can I use l293d module instead??please say plzzzzz

[@AnmolSahuYt]

actually i have never used it, so i am not sure.

[@mazharali3932]

Which type of sensors have u used in this Bluetooth RC Car voice controlled ?

[@AnmolSahuYt]

it's not voice controlled. It is bluetooth controlled.