You should definitely cut the tops of the circles off on the non-gear side so you don't have to try to thread 2 needles over a bed of hot coals. It wouldn't be as aesthetic, but you wouldn't burn your hands trying to add or remove the food.
Excellente réalisation et contrairement à certains commentaires, je trouve que la vôtre est l’une des plus abouties. La seule question que je me permet de vous poser est de savoir est-ce-que les roues dentées ont étés fabriquées par vous même ou les avez-vous achetés? Et si si c'était le cas d'un achat, j'aimerais savoir où vous les avez achetés et combien sont leurs diamètres intérieur et extérieur, et aussi avez-vous utilisez un variateur de vitesse ou pas et enfin, combien de boîte de chaine ont été nécessaires, merci de votre réponse et bravo, car je voudrais faire comme vous, Pierre depuis Paris
Good idea but I would prefer making it in away the shafts can be released easier by cutting the back part to 3/4 moon so the shafts are easier to pull up
Remove the lower sprockets and run the chain over and under the upper sprockets. Each spit will rotate in opposite directions. Less friction and load on the motor. That's how my hot dog cooker works. As the spits rotate, there will be less interfertence with the food going against the rotation of the adjoining spit. Other than that, it's a really good BBQ rotisseerie.
![YoungBoy Never Broke Again - Missing Everything [Official Video]](http://i.ytimg.com/vi/dTYeMZGzOzw/mqdefault.jpg)
You should definitely cut the tops of the circles off on the non-gear side so you don't have to try to thread 2 needles over a bed of hot coals. It wouldn't be as aesthetic, but you wouldn't burn your hands trying to add or remove the food.
Like❤creat.......❤❤❤❤❤❤
Very nice! Maybe try lowering the voltage if slower rotation is desired.
Excellent video.
SO the motor is just an ordinary 12V wiper motor?
Nice...rotation speed control switch wuld be awemazin...
Complimenti e’ veramente uno spettacolo .
Sono un fanatico del barbecue ma questo le supera tutte.👍👍👍👍👍
바베큐 기계기술이 대단하십니다
Excellente réalisation et contrairement à certains commentaires, je trouve que la vôtre est l’une des plus abouties. La seule question que je me permet de vous poser est de savoir est-ce-que les roues dentées ont étés fabriquées par vous même ou les avez-vous achetés? Et si si c'était le cas d'un achat, j'aimerais savoir où vous les avez achetés et combien sont leurs diamètres intérieur et extérieur, et aussi avez-vous utilisez un variateur de vitesse ou pas et enfin, combien de boîte de chaine ont été nécessaires, merci de votre réponse et bravo, car je voudrais faire comme vous, Pierre depuis Paris
Good idea but I would prefer making it in away the shafts can be released easier by cutting the back part to 3/4 moon so the shafts are easier to pull up
Es ist unbequem, Spieße einzufügen, und die Arbeit ist cool.
Remove the lower sprockets and run the chain over and under the upper sprockets. Each spit will rotate in opposite directions. Less friction and load on the motor. That's how my hot dog cooker works. As the spits rotate, there will be less interfertence with the food going against the rotation of the adjoining spit. Other than that, it's a really good BBQ rotisseerie.
Wandering how the motor delt with all the heat from the red hot coals? Nice build though :)
Masha Allah
Как долго проработают подшипники, при таком нагревании?) Про мотор вообще молчу)
기술이 대단하십니다
Only one question: about use of PPE nothing?, at least some safety gloves, your hands are not replaceable. It's only a humble suggestion.
😂😂 you got the chain saw massacre grill😅
Excellent Brother, can u provide us the drawings and measurements
Why all the gears on the bottom, could have have weaved over top, than under, and then down to sprocket?
Better grip & less slip.
Que motor le colocan
Excelente ay fue
can i buy this if yes rate plz
❤❤❤❤
Idéa boa mas podería ser melhor. Só não gostei do sistema de espetos, mas o resto ficou top.
Looks overly complicated
Isso foi legal
5:11 What is the name of the part? I want to make it!
Nice content but the music track has to go bro. You don’t need music with these type of videos…
Mantap
You brushing your bare hand over the freshly drilled holes gave me the willies. That’s just asking for a steel burr in the hand. Use a brush, brother.
More gear reduction so your food doesn’t keep falling off.
What is name of the machine in starting which is cutting the metal sheet from 0.22 min.?
Laser cuting machine.
Plasma cutter
Καλο
Loading and unloading while the coals are glowing is a real adventure. The ashes just fall on the floor?
остановки где , и скорость меньше нужна !!!😫
Essa chus tem muito bugi.
NÃO gostei
Show.
😎 ρгό𝔪σŞｍ
on va se marrer quand tu vas te prendre les couilles dans la chaine !
Хватило бы одной натяжной звездочки
как ты собираешься шампура одеть когда огонь будет гореть снизу ?
Почему без коллайдера? Дешёвка.