You need to tighten it that’s why it won’t stop. My jato did the same thing there’s 2 screws on the disbrake keep playing with it you’ll see the difference don’t tighten it too much
Re Duce the idle speed if it the idle won’t drop riching the low speed needle at 1/8 turn. Then lean it back at 1 quarter turn like I did you’ll get right play with it back and forth until you get it right
@@therccelebrityspeedfresh5393 thanks I got it to switch, now I need to tune it down some I had a top speed of 74mph 😩with a temp reading 319 degrees. Is that safe lol
@@thepromoterschannelworldwi654 Becareful don’t lean it out too much it will burn the motor out and it can damage it. My old 2017 jato has been clocked at 75
🤨Your supposed to have the shell off on the first tank buddy Lo second tank shell on third tank shell off 4th tank shell on DONT have to take off smh read the instructions first buddy 👍🏾
Oh I’ve been doing this for along time I watch the video about how to get the engine break in when I was 17 when I had a Traxxas nitro 4tec 2.5. I know it all now. I’m the nitro engine tuning master. I’ve been doing this for 23 years. I don’t have to read the instructions no more I watch videos of it now. I’ve read the instructions along time ago. I’m the professional tuning I know them stuff. I replaced the 3rd engine on my old 2017 jato 3 times before
I always hate the break in.❤️the sound
I agree man I said the same thing too but you got to do it if I drive it hard with out breaking the engine in. It will damage it
Menace 21 3 speed can’t beat it yay nice one
Nice RC bro love the color
Having problems with my Jato 3.3 it want stop at all I replaced the brakes and shoe clutch and still want stop any suggestions
You need to tighten it that’s why it won’t stop. My jato did the same thing there’s 2 screws on the disbrake keep playing with it you’ll see the difference don’t tighten it too much
Nope just reverse the brake assembly
@vincentcohen3688 won't Stop? That what you saying? If so do what charlesruiz2510 said. Look up the video on the Jato 3.3 break hack.
Nice work
Very helpfull bro thnx
You’re welcome
I’ve tried to slow down the idle too
Mine continues to roll during idle no matter how I adjust it. What do I do
Re Duce the idle speed if it the idle won’t drop riching the low speed needle at 1/8 turn. Then lean it back at 1 quarter turn like I did you’ll get right play with it back and forth until you get it right
@@therccelebrityspeedfresh5393 thanks that workrf
Very nice nitro car I want to get one eventually
They can special order it for you. I work there at the RC hobby shop
@@therccelebrityspeedfresh5393 Is there any steal drive shafts for the Jato? I know there is some for the tmaxx..
@@singhix8798 you can put steel drive shaft on there Traxxas got them
@@singhix8798 RC hobby shop has them too I think they on back order right now when Traxxas runs out. Everybody runs out
@@therccelebrityspeedfresh5393 lol I have been trying to get one for a long time now
Is that a new 2021 jato
Yes sir I got it
I told you I was gonna get it and here it is
@@therccelebrityspeedfresh5393 I AM SO SUPRISED
@@therccelebrityspeedfresh5393 Are you login to do any upgrades to it
I can’t get my jato to switch gears, any remedy for this?
You need to un losing it the hex screw is inside the transmission gear box use your flash light hold the spurgear roll it until you see it.
@@therccelebrityspeedfresh5393 thanks I got it to switch, now I need to tune it down some I had a top speed of 74mph 😩with a temp reading 319 degrees. Is that safe lol
@@thepromoterschannelworldwi654 Becareful don’t lean it out too much it will burn the motor out and it can damage it. My old 2017 jato has been clocked at 75
@@thepromoterschannelworldwi654 73mph? Have that on video?
No, but I do have pictures and recordings of the dashboard with mph and temps
Takes 5 tanks for break in ?
Yes
Please, please, please dont use that fuel. The worst on the market. Now that BYRONS AND Bones Brew are gone VP Or sidewinder I highly recommend.
I’m still getting bones brew for my slayer but I run vp in my jato. I swear by vp
Not to me it ain’t no issue on mines
🤨Your supposed to have the shell off on the first tank buddy Lo second tank shell on third tank shell off 4th tank shell on DONT have to take off smh read the instructions first buddy 👍🏾
Oh I’ve been doing this for along time I watch the video about how to get the engine break in when I was 17 when I had a Traxxas nitro 4tec 2.5. I know it all now. I’m the nitro engine tuning master. I’ve been doing this for 23 years. I don’t have to read the instructions no more I watch videos of it now. I’ve read the instructions along time ago. I’m the professional tuning I know them stuff. I replaced the 3rd engine on my old 2017 jato 3 times before
@@therccelebrityspeedfresh5393 good job bro I have a brand new one keep up your good work👌