Should have put the sub in the box before you dropped it. That completely ruined the test. You don't know if the damage is caused by the drops or the sub.
the box was damaged after the last fall, you can see when it's in the trunk, and he's next to the woofer about to put that in, the upper left corner is BENT, imho this video is pointless and doesn't prove anything.
drop test is stupid anyways, what is this a phone case test? who the fuk drops sub enclosures. like what others said, compromised the box before putting in the sub. pointless fukkin video
I know a guy who is running 4 of these boxes with 4 Kenwood kfc (the fake carbon face subs) and he’s got two pioneer 1000 amps in them. I guesstimate he’s pushing 200/250 rms per sub. And man that thing is doing 140s in the kick. Blows my mind.
yea 500$ system being single sub budget amp and prefab box does 140s. Hell im floating stuff in my front windo, wish i could get metered @dextermorgan1
Bruh what? @RandoManFPV you "wish you could get metered"? You sound pretty lazy and unresourceful to me. Grow up and quit playing with shitty Chinese junk speakers kid
No liquid nails no Wood glue come on every basshead knows you need a box with at least 50 drywall screws and liquid nails I bet that box would do a lot better with the basshead treatment ❤
I had one of these boxes back in the day. I glued all the joints with clear silicone and then added probably twenty, one inch drywall screws to it. It held up fairly well and I eventually gave it away.
Scosche is actually pretty legit in the DIY space of car audio. Can't speak for the boxes, but the electronics are decent. Could be better, but they're far beyond the cheap amazon and ebay garbage out there
I built one of those boxes too for a 10" cerwin vega. I'm running sealed at 400 watts rms. It's fine. Don't follow the directions. Rip off the foam tape at the seams. Glue and brad it together. Make a few triangle braces for the mid points of all the joints with some 3/4 plywood laying around along with some longer braces on the inside lip of the front baffle. I added a $10 binding post terminal block. For $38 it was a steal. I couldn't go buy the wood and carpet for that much in Alaska. The internal size is perfect for the requirements for the vega. Hits nice.
You have to assemble it yourself. The only advantage to a cheap premade box is that you don't have to assemble it. They can't even get that part right.
Marketplace: "Deaf Bonce 4512R with custom box, $1800. No loballs I know what I got" 😂 Every Audio Meet: "Yo, my 4512R sounds amazing. Check out this custom ported box I got!" "Bro that's a sealed box with a bad seam" 😅 Any Audio Group: "Man, my Deaf Bonce 4512R does 160's all day in my custom box" All jokes aside I would've loved to see this box assembled with alot of glue and clamped together during the cure then see if the sub could blow it apart, also would've loved to see its meter score being heavily glued together.. Cool video for sure 👍
I put up a video on my channel a couple of years ago asking people if when they build boxes, do they just use screws, Brad nails, or just wood glue? So I put a couple of boards together with just Brad nails and wood glue. Then after it had all dried, I took a sledge hammer to the boards and the wood separated but the wood glue and Brad nails never failed! So if I were to buy a cheap box like that, I would have used wood glue on all mating surfaces, and then use some 18 gauge Brad nails to hold it all in place till the glue dried. Just to ensure it was sealed up good, I would have gone over all of the inside seams with silicone.
Not bad for a carpet covered paper cabinet. If I'm ever in the market for one, I'd definitely consider something else. Fun video as always! Thanks for the laughs Parker!
I think you should do a round two with the same box but put wood glue on the seams & see if it stays together under the same test conditions you used 😅
I’ve owned a couple of these enclosures in the past. I remember when they were $35. I sealed them with liquid nails and worked well for a small daily setup.
Omg such a nice video that was my dream to see what would happen to such a cheap box with a quality heavy weight sub u made my life i can die in peace now hopefully there are comming more videos like this! ur the best Greetings from germany :)
You'll be surprised by how many people run low quality out of spec boxes 📦 yet they're systems sounds Freaking LOUD 😂😂😂 but its all good! WE'RE ALL BASS HEAD LOVERS IN THE END 😊
To be honest this box with a few little tweaks wouldn't be bad. Use some liquid nails on the seams, add a few braces around the face and a few extra screws along the edges while it is curing and for about $55 and a small amount of extra work you have a decent little box. Also that 130lb subwoofer facing up would be a lot less stressful for the box. It wouldn't even be hard to make a nice second layer for the face of the box too. Make it much stronger.
I put a 12" Orion HCCA in a prefab box. Guy in the shop said "yeah it can handle the abuse the HCCA can put out, well, to make that story short. That box barely made it to the day I replaced it, lol. I took the sub out and the box folded on itself. I had a box made for the sub from a local shop that had a great reputation.
Love the videos and the box torture test not only the subwoofer won but it was having fun doing it that sub was laughing it is a tank of a subwoofer absolutely a real monster
Parker have you seen the Jones Subwoofer Solutions 600 12" sub? Its got a 600oz motor on it, I believe making it the largest 12" motor (I could be wrong).
If Big Jeff doesn’t offer it, or the company doesn’t get an advertisement in the video, Parker isn’t doing it anymore. I miss the $100 budget banger videos, but understand evolving as well.
for me, I always overkill. if I have a prefab box, sub, etc. stock or otherwise, I add wood glue, caulk it inside, etc. BUT... as sent and as stated to assemble. you did the right thing.
Love the vid man! I actually ran several of those through the years, unfortunately there's some better ones for close to the same price. Obviously none of the cjeap prefabs are gonna hold up to the abuse of a sub like that, but o was a bit surprised it held up as long as it did. When i had them, i glued it an put extra screws.Mine got thrown out the back of my dodge stealth when i was in a car accident. Very surprised the subs an boxes survived lol.
Hey Parker. Audiopipe just came out with a new Competition subwoofer that has a 375 oz magnet. ttx-bdx-12d2 Would love to see you put that baby to the test.
I guess what we learned here is that MDF is a lot stronger than you think. And silly me was afraid to sit on my 1.4cu 10" box at one point, mind you i only weight a hundred pounds lol.
@@ParkerTheBasshead was weighing the options for my upgrades I went with a Deafbonce AAK 6k but instead of the 4515 I went with the Incriminator audio TYRANT 15 for a little more power handling but the AAK is a monster loving the deafbonce products
Could you possibly take my request? Do a review of the Dayton Audio 1200 subwoofer. I'd like to know what opinion an audio enthusiast would have on my subwoofer.
Im running a Resilient sounds onyx in a spl prefab from Q power running off a Taramps big boss 3k at ½ ohm. I think i paid 68 dollars for the box new shipped from Ebay. It gets nasty. I put PL3x loctite in all the seams 1st. It has a 1" baffle too. Its definitely my builds weakest link but it slaps. If you would have glued your wally world box before screwing it, it would have been an okay box for a prefab i bet. For entey level subs of course. Dropping it 3x didnt do it any favors either, lol.
I got two of those and i practically blew them apart with just 2 walmart 12 inch jensens lmao, they still going after roughly a year but ive had to put some more screws in them
This is a Great Box For An Entry level Bass Head who is just starting out and doesnt have lots of money to start out with............Mr. Parker, Please explain with your own opinion about this box ?.......Without that HUGE 130LB SUB On That BoX.... kicker,jensen,Power Acoustik,Pioneer,Dual Subwoofers and do a review on that Please!!!!....
It’s a good box but I would take out the double stick tape when putting it together and rather use wood glue when putting it together. and then silicone glue it all over edges inside
Im surprized goofy parker didnt break off the speaker terminals removing the sub like that but i guess when u got ppl giving u thousands of dollars in gear u really arent that careful not the brightest bulb 💡 ive ever seen.
This video is so wrong and pointless, that the moral of the story is : get your shit straight and know what you're dealing with, the overkill sub, the fact that he's been treating the box badly prior to mounting the sub, it simply doesn't prove anything useful. Just like you can't fit a v12 engine in a fiat 500, you shouldn't be using an expensive subwoofer with a badly beaten budget-oriented pre-fab box. This doesn't prove anything, i'm sure he's got his money back with all the views, but this was pointless to begin with, and it just scares the potential buyers FOR NO REAL REASON.
I hate this video all it dose is make Scosche box look bad and could stop people from buying it, I guess you didn't read the instruction manual there recommended RMS power is 250w RMS then it tell you to glue the box. Then you broke the front plate dropping a 130lbs Di*k Beater sub on it.. you should have said this box was not made for this so don't hold that on Scosche as we are way out side there specs and didn't glue but we are breaking it for you guys enjoyment. I put one of these boxes in my kiddos car with the walmart kicker comp sub was in there 5yrs now and we added a second one like 1.5 years ago we did glue both as recommended and there both working great was my 1st time not building the box my self there not great boxes but good enough for there recommended subs and dose save a lot of time to help my kiddo out as she is vary impatient. please be carful a bad RUclips video can really hurt companies these days and we need all the USA Based companies we can or a china one will swoop in take over that market gap.
I totally agree I once got a 12" Walmart subwoofer box and it was already assembled. I still glued every seem and added a 3/4" of mdf in the front. Then I cut a 15" hole and put a 15" NVX VCW v3 1500rms watt subwoofer in the Walmart box and it sounds loud and amazing.
Yeah, wanted to unsubscribe from his channel once i saw just how pointless and stupid this video was, but i then discovered i wasn't even subscribed, thank God, i thumbed down the video though, i can't stand stupid.
Should have put the sub in the box before you dropped it. That completely ruined the test. You don't know if the damage is caused by the drops or the sub.
the box was damaged after the last fall, you can see when it's in the trunk, and he's next to the woofer about to put that in, the upper left corner is BENT, imho this video is pointless and doesn't prove anything.
@@lupuradu I agree he's more less making fun of this subwoofer box.
drop test is stupid anyways, what is this a phone case test? who the fuk drops sub enclosures. like what others said, compromised the box before putting in the sub. pointless fukkin video
@@RyanBassForLifeI think that’s the point lol
i think he originally cracked it and then it continued to be damaged by the sub, you can see it flex more and more through the video
Now that's a box you should mount your amps to. 😂😂
Should have at least put some glue and tested the box before you torture test it.
I know a guy who is running 4 of these boxes with 4 Kenwood kfc (the fake carbon face subs) and he’s got two pioneer 1000 amps in them. I guesstimate he’s pushing 200/250 rms per sub. And man that thing is doing 140s in the kick. Blows my mind.
140's are easy to get to. Hell even 150 isn't too difficult nowadays with the cheap equipment we have available.
yea 500$ system being single sub budget amp and prefab box does 140s. Hell im floating stuff in my front windo, wish i could get metered @dextermorgan1
I got two mmat monster 12s doing 147 on stock
140's ain't shit. Especially for 4 subs even though they're just cheap Pioneer's.
Bruh what? @RandoManFPV you "wish you could get metered"? You sound pretty lazy and unresourceful to me. Grow up and quit playing with shitty Chinese junk speakers kid
No liquid nails no Wood glue come on every basshead knows you need a box with at least 50 drywall screws and liquid nails I bet that box would do a lot better with the basshead treatment ❤
Right , atleast some wood glue man
Running out of ideas for videos? 😂
For real though. I thought the same thing. 🤣🤣🤣
Still an interesting video to watch tho 🤷🏻
Was actually curious to know
May seem that way...but you know there's people out there who are going to go out and get a very caple subwoofer and throw it in a trash box.
Should have did a DB meter with that sub in the cheap box b4 you destroyed it. Then put it in a decent custom box to compare the differences
My 18 is mounted in a 55 gallon plastic drum, been cut down and braced, sounds amazing
No way!!!😂😂
Really though, that's cool af!!
It hits harder than a box, 4 inch tube port. Wish I could post a pic of it
@@1986BassHeadI did that with a 12 a long time ago. Reminds me of one of those bass cannons they used to make. (Idk if they still do or not)😂😂
I’d love to see that in action. We used to make “Bazooka” tubes from everything for every speaker when we were kids.😂
BULLSHIT
Enjoyed the video my guy. That box was begging for you to stop. 🤣🤣🤣 Rest in pieces lil box
I had one of these boxes back in the day. I glued all the joints with clear silicone and then added probably twenty, one inch drywall screws to it. It held up fairly well and I eventually gave it away.
Scosche is actually pretty legit in the DIY space of car audio. Can't speak for the boxes, but the electronics are decent. Could be better, but they're far beyond the cheap amazon and ebay garbage out there
What you should’ve did is a box design for it versus a Walmart box an the db gains when using big subs that pre fabs dont work
Nice but you really should of tried gluing the damn subwoofer box together and add a few more screws and it would of did good and sounded nice.
I built one of those boxes too for a 10" cerwin vega. I'm running sealed at 400 watts rms. It's fine. Don't follow the directions. Rip off the foam tape at the seams. Glue and brad it together. Make a few triangle braces for the mid points of all the joints with some 3/4 plywood laying around along with some longer braces on the inside lip of the front baffle. I added a $10 binding post terminal block. For $38 it was a steal. I couldn't go buy the wood and carpet for that much in Alaska. The internal size is perfect for the requirements for the vega. Hits nice.
You have to assemble it yourself. The only advantage to a cheap premade box is that you don't have to assemble it. They can't even get that part right.
Have the same box 📦 re-baffled 2 8's... glued and screw... is ok 👌
But... why try to destroy the box b4 using it as intended....
Next, take a Gately box and drop it off a shelf, then see how long it lasts with this subwoofer.
Marketplace:
"Deaf Bonce 4512R with custom box, $1800. No loballs I know what I got" 😂
Every Audio Meet:
"Yo, my 4512R sounds amazing. Check out this custom ported box I got!" "Bro that's a sealed box with a bad seam" 😅
Any Audio Group:
"Man, my Deaf Bonce 4512R does 160's all day in my custom box"
All jokes aside I would've loved to see this box assembled with alot of glue and clamped together during the cure then see if the sub could blow it apart, also would've loved to see its meter score being heavily glued together..
Cool video for sure 👍
I put up a video on my channel a couple of years ago asking people if when they build boxes, do they just use screws, Brad nails, or just wood glue? So I put a couple of boards together with just Brad nails and wood glue. Then after it had all dried, I took a sledge hammer to the boards and the wood separated but the wood glue and Brad nails never failed!
So if I were to buy a cheap box like that, I would have used wood glue on all mating surfaces, and then use some 18 gauge Brad nails to hold it all in place till the glue dried.
Just to ensure it was sealed up good, I would have gone over all of the inside seams with silicone.
Nice vid bro I'm surprised that monster even fit in the box
Not bad for a carpet covered paper cabinet. If I'm ever in the market for one, I'd definitely consider something else.
Fun video as always! Thanks for the laughs Parker!
I promise you that anyone that can afford that sub is NOT going to buy that box..
Duh lol I think it’s more of a joke video then a serious one
I think you should do a round two with the same box but put wood glue on the seams & see if it stays together under the same test conditions you used 😅
Cause "why not"? Famous last words! 🤣🤣 Awesomely great (and entertaining) video bud!!
Thank man!!
I’ve owned a couple of these enclosures in the past. I remember when they were $35. I sealed them with liquid nails and worked well for a small daily setup.
That box had no chance with that beast in it.. great video had to watch till the end..
Sponsor my build, I only need 3 more taramps md8000.1
@@justinboone8700 Lol sponsor a job 😢
That sub is effing rowdy these subs are definitely top tier quality.
Why not ask this is RUclips I probably make more than you
@@justinboone8700 buy it u make so much.
Some tightbond and no drops, probably be okay as long as it met the volume needs. Still not worth $50.
Omg such a nice video that was my dream to see what would happen to such a cheap box with a quality heavy weight sub u made my life i can die in peace now hopefully there are comming more videos like this! ur the best Greetings from germany :)
Haha thank you man!!
@ParkerTheBasshead 😂😂😂😂 gæ? Yes
Literally figured out the best way to install the sub by taking it out, then put it back in the hard way
You'll be surprised by how many people run low quality out of spec boxes 📦 yet they're systems sounds Freaking LOUD 😂😂😂 but its all good! WE'RE ALL BASS HEAD LOVERS IN THE END 😊
Loved when you tapped on it ' good as new' after youd taped it back together lol.
I like it so much better when you test high-end stuff I think we all know what to expect when it comes to that cheap stuff
7:08 turned into whistlindiesel for a second 😂
To be honest this box with a few little tweaks wouldn't be bad. Use some liquid nails on the seams, add a few braces around the face and a few extra screws along the edges while it is curing and for about $55 and a small amount of extra work you have a decent little box. Also that 130lb subwoofer facing up would be a lot less stressful for the box. It wouldn't even be hard to make a nice second layer for the face of the box too. Make it much stronger.
Why did I not think about putting the box on the sub. Had a similar issue with a beefy sub.😂🤣🤦♂️🤦♂️🤦♂️🤦♂️
I put a 12" Orion HCCA in a prefab box. Guy in the shop said "yeah it can handle the abuse the HCCA can put out, well, to make that story short. That box barely made it to the day I replaced it, lol. I took the sub out and the box folded on itself. I had a box made for the sub from a local shop that had a great reputation.
Man, I'd LOVE to have a pair of those Apocalypse 12s...
Freeload much?
Love the videos and the box torture test not only the subwoofer won but it was having fun doing it that sub was laughing it is a tank of a subwoofer absolutely a real monster
Didn't realize that sub was quite that heavy. Good stuff
Tearing that sub out gonna rip them terminals off
Some wood glue would have helped huge. Should have been included in the box
😂😂 you got to keep that box in the back drop of all your videos now
Parker have you seen the Jones Subwoofer Solutions 600 12" sub? Its got a 600oz motor on it, I believe making it the largest 12" motor (I could be wrong).
If Big Jeff doesn’t offer it, or the company doesn’t get an advertisement in the video, Parker isn’t doing it anymore. I miss the $100 budget banger videos, but understand evolving as well.
Turned out to be a nice looking box in the end 😂😂😂😂😂
The struggle is real. 😂 I’d be struggling more than you.
The box was hurtin’. Poor little screws.
Great video.
You think adding screws and some caulking on the interior seams would make the box legit ❓
14:50 decimated forget about decibals!
for me, I always overkill. if I have a prefab box, sub, etc. stock or otherwise, I add wood glue, caulk it inside, etc. BUT... as sent and as stated to assemble. you did the right thing.
He goes from smiling to frowning then back to smiling again all in the same phrase all the time. 😮
bro..if ya bored you can come down to the beach and help me do this box for 2 21s
Walmart "Tuned" my box! 😂
Like the idea, but why intentionally damage the box before the test? 🤔
Redo the video with a new box, and use glue this time.
15:08 average ebay seller right here trying to sell me his products lmao 😂😂😂
Love the vid man! I actually ran several of those through the years, unfortunately there's some better ones for close to the same price. Obviously none of the cjeap prefabs are gonna hold up to the abuse of a sub like that, but o was a bit surprised it held up as long as it did. When i had them, i glued it an put extra screws.Mine got thrown out the back of my dodge stealth when i was in a car accident. Very surprised the subs an boxes survived lol.
Hey Parker. Audiopipe just came out with a new Competition subwoofer that has a 375 oz magnet. ttx-bdx-12d2 Would love to see you put that baby to the test.
If someone whats just a little bass that box would work
😂😂 funny stuff 👍 thanks bro. Can't wait to see the new build
Try them a realistic size subwoofer. Those DB12s shouldnt even be in anything less than 3/4" with braceing. Not a general everyday diy budget setup
Awesome video Parker!! 👌 Makes me want to go out and break something!
That sub is a monster. BASS ON
Nice Subaru 🎉
When 1 speaker doubles the value of your car, You might be a basshead!!
This was fun.
So my subwoofer is 1 ohm 1250w rms cea rated 2500w program 5000w peak and my amp is 2500 so do I need to turn the amp down half way for the rms?
No glue no nails and no double baffle😂
I think if you glued it... cant see a issue bit thin and has no supports but its fine
Thanks for the laughs Parker!
I guess what we learned here is that MDF is a lot stronger than you think. And silly me was afraid to sit on my 1.4cu 10" box at one point, mind you i only weight a hundred pounds lol.
This is great i love doing stuff like this great video bro basshead s***
💪🏼💪🏼🔊🔊
@@ParkerTheBasshead was weighing the options for my upgrades I went with a Deafbonce AAK 6k but instead of the 4515 I went with the Incriminator audio TYRANT 15 for a little more power handling but the AAK is a monster loving the deafbonce products
Could you possibly take my request? Do a review of the Dayton Audio 1200 subwoofer. I'd like to know what opinion an audio enthusiast would have on my subwoofer.
Cool video idea, I like this.. Keep up the great work..
Im running a Resilient sounds onyx in a spl prefab from Q power running off a Taramps big boss 3k at ½ ohm. I think i paid 68 dollars for the box new shipped from Ebay. It gets nasty. I put PL3x loctite in all the seams 1st. It has a 1" baffle too. Its definitely my builds weakest link but it slaps. If you would have glued your wally world box before screwing it, it would have been an okay box for a prefab i bet. For entey level subs of course. Dropping it 3x didnt do it any favors either, lol.
I have 2 of the sa305s in my bed, I think I’m going to buy 2 of those in a 15” next
I had these boxes I almost had to use adapters to make subs fit the cutout is about 1/4 inch too big.
there should be a national holiday when ever
Parker posts vids
Hahaha I really appreciate it man!
Could you do a video on the recoil pw12 subwoofers?
I got two of those and i practically blew them apart with just 2 walmart 12 inch jensens lmao, they still going after roughly a year but ive had to put some more screws in them
You should a professional loud speaker Box with steel bolts all around
That flat-pack box is WAYYY overpriced at $50.
I saw deaf bonce has a 12 machete combo box sub and. Amp for 199 can you do a video on that
This is a Great Box For An Entry level Bass Head who is just starting out and doesnt have lots of money to start out with............Mr. Parker, Please explain with your own opinion about this box ?.......Without that HUGE 130LB SUB On That BoX.... kicker,jensen,Power Acoustik,Pioneer,Dual Subwoofers and do a review on that Please!!!!....
日本🇯🇵のヤフオクで見たことあるbox😅
💪🏼💪🏼🔊🔊
let's say "Parker loathes this box" 🤣
hey I got a 64ah headway any chance you know why im getting a bad smell out of it? everything seems good but they smelly funny
please do a review of Bass Rockers D4 Ohm High Power Car Subwoofer 12" Aluminum 4000 Peak /2000W RMS
Could you please review some slapz audio subs I think they might be the new best budget line of subs!
It’s a good box but I would take out the double stick tape when putting it together and rather use wood glue when putting it together. and then silicone glue it all over edges inside
Yo Parker really had some idle time on his hands 😂😅
Im surprized goofy parker didnt break off the speaker terminals removing the sub like that but i guess when u got ppl giving u thousands of dollars in gear u really arent that careful not the brightest bulb 💡 ive ever seen.
I got one of these boxes for 30$ and it works pretty decent but it leaks air like crazy
The quality of that box matches the quality of your video
That box with liquid nails and a basic w0 or something on 2-300 watts would be alright.
Deaf bonce SA2508 or Skar ZVX 8 subwoofer?
Moral of the video. Don't buy pre-cut cheap boxes.
Build your own, or get a proper pre-built
This video is so wrong and pointless, that the moral of the story is : get your shit straight and know what you're dealing with, the overkill sub, the fact that he's been treating the box badly prior to mounting the sub, it simply doesn't prove anything useful.
Just like you can't fit a v12 engine in a fiat 500, you shouldn't be using an expensive subwoofer with a badly beaten budget-oriented pre-fab box.
This doesn't prove anything, i'm sure he's got his money back with all the views, but this was pointless to begin with, and it just scares the potential buyers FOR NO REAL REASON.
Any ideas on a wall build yet?
I hate this video all it dose is make Scosche box look bad and could stop people from buying it, I guess you didn't read the instruction manual there recommended RMS power is 250w RMS then it tell you to glue the box. Then you broke the front plate dropping a 130lbs Di*k Beater sub on it.. you should have said this box was not made for this so don't hold that on Scosche as we are way out side there specs and didn't glue but we are breaking it for you guys enjoyment. I put one of these boxes in my kiddos car with the walmart kicker comp sub was in there 5yrs now and we added a second one like 1.5 years ago we did glue both as recommended and there both working great was my 1st time not building the box my self there not great boxes but good enough for there recommended subs and dose save a lot of time to help my kiddo out as she is vary impatient. please be carful a bad RUclips video can really hurt companies these days and we need all the USA Based companies we can or a china one will swoop in take over that market gap.
it's Parker.i don't think he cares
I totally agree I once got a 12" Walmart subwoofer box and it was already assembled. I still glued every seem and added a 3/4" of mdf in the front. Then I cut a 15" hole and put a 15" NVX VCW v3 1500rms watt subwoofer in the Walmart box and it sounds loud and amazing.
Not that deep bro
Yeah, wanted to unsubscribe from his channel once i saw just how pointless and stupid this video was, but i then discovered i wasn't even subscribed, thank God, i thumbed down the video though, i can't stand stupid.
Cry me a river. Ppl gonna buy what they want regardless. Talk about sensitive
My skar box is coming apart with to skar svr in it
Can you do a budget death bounce aub?
14:35 That don't even look like MDF Looks more like grounded up recycle cardboard glued & pressed together