The timestamps for the different topics covered in the video: 0:53 The concept of Transconductance 3:26 What is Small Signal Approximation 9:30 BJT- Small-Signal Model
Hi! Thank you so much for this video. I though it was difficult to understand it at first but later realized it was my lack of attention. I understood small signal analysis after 3 semester thanks to this video. You earned my subscription and definitely liked and loved this video.
Since it is a small signal analysis,so it has been assumed that the time varying ac input signal is very small in magnitude. And because of that the change in vbe on top of the Vbe is also very small. I hope it will clear your doubt.
@@omerfarukcin3978 yes I am also using same book But it is little bit confusing to understand.. It take a little bit more time to understand properly...
Irrespective of the configuration, the small signal model of BJT remains the same. Based on the configuration and the external resistor, the small signal equivalent circuit will be different for different configurations.
Well, I understand this small signal model, but the derivations just add complexity. I find the re model using a diode and controlled current source so much more intuitive. The diode ac resistance in the emitter is simply re=26mV/IE (the emitter current IE from the DC Bias) and the controlled current source Ic = alpha (Ie).
Well,,. U may not need to draw that Circle around it... But the direction of arrow represents the Emitter... Downward Arrow represents the transistor is NPN Upward arrow represents The transistor is PNP
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
The timestamps for the different topics covered in the video:
0:53 The concept of Transconductance
3:26 What is Small Signal Approximation
9:30 BJT- Small-Signal Model
Best channel about electronics on internet .
I wast stucked at this model for three to four days , thank you so much for makinh it simpler.
Hi! Thank you so much for this video. I though it was difficult to understand it at first but later realized it was my lack of attention. I understood small signal analysis after 3 semester thanks to this video. You earned my subscription and definitely liked and loved this video.
The hero we need 💖💖, seen a lot of videos , searched many books , wasn't able to grasp this, thank you so much, sir 👌👌👌🙏🙏🙏
The best video on BJT👌🏻👌🏻
Wish me Best Luck for tomorrow's exam :)
All the Best !!
Let say my circuit is control by 50Hz square wave at the Base, does small signal analysis is required?
bro 3:53 sec why did u take delta vbe very small?
Since it is a small signal analysis,so it has been assumed that the time varying ac input signal is very small in magnitude. And because of that the change in vbe on top of the Vbe is also very small.
I hope it will clear your doubt.
@@ALLABOUTELECTRONICS ya bro thanks alot🤗
You're a legend bro! Thank you.
Which text book you have followed or referred?
You can refer Microelectronic circuits by Sedra/ Smith for this particular topic.
@@ALLABOUTELECTRONICS I also used this book, but I hadn't understood it like that before :)
@@omerfarukcin3978 yes I am also using same book
But it is little bit confusing to understand..
It take a little bit more time to understand properly...
bhai aap pakistani hai?
Is there different small signal model for different BJT configurations like common base for example?
Irrespective of the configuration, the small signal model of BJT remains the same. Based on the configuration and the external resistor, the small signal equivalent circuit will be different for different configurations.
i love you man better than my teeacher
Please provide these videos in less resolution show that we can watch more videos instead of one or two.👍
You can lower down the resolution manually in the video settings. Instead of 1080p, you may select 720p or 480p if required.
@@ALLABOUTELECTRONICS I wanna below than 480p
@@gyanganga8441 you go hell
@@gyanganga8441 then watch it in 240p or 144p. But I am pretty sure you won't be able to see anything in those resolutions
Well, I understand this small signal model, but the derivations just add complexity. I find the re model using a diode and controlled current source so much more intuitive. The diode ac resistance in the emitter is simply re=26mV/IE (the emitter current IE from the DC Bias) and the controlled current source Ic = alpha (Ie).
In some configurations, the analysis using re model is easy, while in some configurations analysis using pi-model is very easy.
@@ALLABOUTELECTRONICS Thank you, this must be the case.
@@ALLABOUTELECTRONICS do you have a video on re model as well?
What is the actual meaning for del symbol?
differentiation for a multivariable function.
Excellent analysis!
What is that symbol with the angled arrow and circle around it? (Sorry still new to this)
It is the symbol of BJT.
Well,,. U may not need to draw that Circle around it...
But the direction of arrow represents the Emitter...
Downward Arrow represents the transistor is NPN
Upward arrow represents The transistor is PNP
Superbb👌👌🔥❤
Tomorrow exam attendence🎉
Thnx for the hard work bro. Still appreciate your efforts.✌✌
Thank you sir...
Very Clear and informative video. God bless you
Sir Can you please plz share the slide in description section or comment section, it will be easy for us to revise
Excellent 👌
Great video
Hey, great videos! Can you please also make videos on Active load in BJT, BJT as a diode and Frequency Response analysis. Please!!
Thank you very much!
Tomorrow is exam 😌
Moore Laura Jones Edward Walker Timothy